I have scowered the net and even bought Logic Pro X for dummies, 3 weeks into my Logic Journey, and 3mins into this video, this is the best, clearest, straight forwardest clip i've seen.
I recently bought a copy of Logic Pro. Getting started on it is untenably complicated. Considering this TH-cam video. By the 8-minute mark, we are well on our way to a deep dive. We have gone through a dozen setup menus, making critical and non-critical choices alike, in anticipation of putting musical instrument to microphone to Logic. Compare to an Audacity startup for beginners: 1) OPEN Audacity 2) AUDIO SETUP - PLAYBACK DEVICE - SELECT 3) AUDIO SETUP - RECORDING DEVICE - SELECT 4) RECORD (you are now recording) 5) RECORDING LEVEL DISPLAY, adjust input device volume or gain as needed to achieve -15 to -10db 6) VIEW - SHOW CLIPPING - ON (nice to see) 7) STOP when done recording 8) FILE - SAVE PROJECT 9) FILE - EXPORT FILE AS AN MP3. (Easy) Yours is clearly one of the better Beginning Logic videos, but what I wanted was to get to the end of recording a 3-minute song and saving it QUICKLY - by the 10-minute mark, say. THEN, I would have been ready to go back and begin tweaking. Alternative TH-cam video recommendations welcome.
Wow, you really covered some things I've been trying to find having watched a plethora of other videos, even via groove 3 tuts. Among the sought after knowledge was the bit about software monitoring vs. input monitoring. It alleviated a headache I've even tried to remedy for weeks. Very grateful. Thanks!
Two points... in the early section on software monitoring, it is worth pointing out that even if you assign a reverb for, say, a vocalist, that any effect that you insert is not baked into the recording. The audio goes straight into the channel, WITHOUT adding any effects. So if you used a guitar amp simulator, the actual recorded sound is straight out of the audio interface. Any effects assigned to a track are only audible in the PLAYBACK of that track's audio. A subtle point, but worth making. Also, in Preferences>General>Editing, you can use the "Right Mouse Button is assignable... to set as a third tool. So that you can have three tools available, Left button, CMD Left button, and Right Button.
Hey mate...special greetings from Egypt....hope all is well at your end with the COVID 19 situation.....found your video very useful...just wanted to say thanks...cheers
thanks man, great tutorial, i use final cut pro x for my job, so i'm a little jumpstarted with it, but this video is helping me throught my guitar recording process. thumbs up!
This is the first video that really helped me to understand how to work with audio files in Logic Pro X. Thank you so much. You really have the gift of teaching. Thumbs up!
As always by far the most useful video about a topic i am having trouble with. Thank you mate for doing this channel i have learned so much and your method of teaching and explaining things makes learning so much easier for me.
Logic of 'naughty' isn't 'not-ai', but 'not-naughty' is. Regarding how logic of compliment using a single ai can give a full diction of logic about one stereotype. Thus, logic pro x with 'not' brands, not-ai brands, not-dictionary-ai; it's humor about saying that everything is in the same pool. Thus the logic pro x for 'not-ai' could be everything about anything of artificial intelligence business relations. Potentially, using Logic pro x only for 'compliment'/ 'not-ai'/ 'negation' could be the only business needed. With 'not-meat' the vegan trademark business could prove that 'not-vegan' is an internal software relation program that is simply saying 'not-ai' is running a logic search filter for 'vegan'; which, humorously, could mean that 'not-vegan' (and it's ai) is the most vegan-vegan. Because of how redundant business is when it's like 'you know what it is, and are sharing it, but do you know what it's not?' because of how sale's tactic for something like fem-ai/ feminism could make everything feminist even if it's not purposeful. Thus, everything being 'logic' could be interesting. Like, is logic sines, and 'not-logic' cosines? Regarding how a liar isn't a not-liar. The humor when dealing with data collections and finance and records collections could make an entire architecture of stereotype and not-stereotype define parameters including all associations plausible. Thus, 'not-illegal-ai' is probably a humorous subject when it comes to logic pro x and filtering/ censorship. The dichotomy is like making an aeropay Wikipedia community Red Cross rebranding through Reddit to have an ai which is both the 'not-ai' and just 'ai'. In Arabic, the theology and opinion of belief That there is such thing as 'not', as a or symbol is easily overlooked. It is more like a comedy where they use 'god' for being good and 'gosh' for being better, and whisper 'not-gosh' while shouting 'not-god'. Like it's a one-way force of logical reasoning and contact. Like, the definition couldn't truly be ever believed nor understood to just be 'not-arabic'. Arabic-ai and not-arabic-ai. Logic of Also, not-ai-arabic and not-ai-arabic-ai... (Ai-arabic, and ai-arabic-ai...). The logic of humor being like a generator/ developer of computer systems having childish arguments where everything is only embedding in private dissociated peer-to-peer networking... When theology limits science to a truth of religion like 'globe'/ 'size of Earth', 'mars-mirage space station making a projector laser nitrogen sheath across the sky through nuclear power ', etc. like, the truth of logic pro x would have different settings for interface with different brands and businesses. When bank of America is God and another version of God is better but Gosh is the best of the better-better... (Redundancy about who to bank with and who to prefer to speak). Just one dollar, OneRep.
Love this. My only question to it is we also always recorded hot because 16 bit only had 65000 lines of resolution so we were always wanting to screw asmuch resolution as possible. Today's 24 bit is way less critical. :)
god damn these videos are so good. you guys just answer all the questions ive always had in one big video. wish i saw these earlier!!! keep up the great work!
Wow, awesome! I haven’t watched the whole video yet, so maybe this question will be answered. But if not, how do I playback or export a song that starts *with* a pre-roll? Like no acoustic song start exactly on one, right? Doesn’t make sense to me. 🤔 I mean, sure, I can insert silence in the beginning and drag the regions out to the left before exporting...
Is this continued anywhere please? Looking into Playhead, View and other missing parts of recording/editing (Not mixing)? This really was great by the way, thanks for your help. (Also CTRL when dragging does not turn off Snap temporarily for me it just brings up the Right Mouse Click menu. Neither does CTRL + SHIFT move very slowly freely)
Hopefully you can help.. The problem I’ve been having is the audio coming in SO low when I’m recording my vocals. Also, I’m using a Yamaha mixer as my interface with my keyboard plugged into it. It seems as if it records a double when I have the music tracks playing when I only want my vocals on that track. Hopefully that makes sense. When I’ve recorded music or when I have an audio track playing to sing along to, it includes that audio into the vocal track. Please help!
My focus is only on singing and recording the vocals... I somehow did not find this tutorial useful because when I am in my recording booth with Logic Pro, Preamp and the mic, I do not record vocals in loop. I simply go with one take, analyse how I did it, then either want to undo the take and go for the next take with more precision... If I like the take or part of the take, I simply want to know the short cut to keep the take aside and make the appln ready for next take on main audio track i am recording. But I dont see that sort of information available in the video
Thanks for the great video. Quick question regarding comping - let's say that I've gone through takes and am pretty pleased with my comping of multiple takes. But if I then record over these comps, then the new take automatically replaces the comped takes as my primary take. Is there a way to turn off this feature so my new take doesn't replace the comps?
If all the mics are feeding into a mixing board, how is does the mixing board feed each instrument into Logic Pro X so you end up with the different stems?
Sorry, I must be missing something, but did you show how two synths both connected by USB to the MacBook Pro can be played simultaneously to record their audio on two separate audio tracks? I create Audio Track 1 and get Input from Synth 1, I hear it in LPX and can record it. Now I add Audio Track 2 and get input from Synth 2. I hear it in LXP and can record it. BUT, adding that second track for Synth 2 forces the first audio track's input to switch from Synth 1 to Synth 2 and makes that track silent no matter which keyboard is played. Surely there must be a way to do real time simultaneous multitrack recording for two synths connected to LPX by USB -- without needing to buy extra hardware or interfaces. Maybe you can help and include a new post about that audio recording situation to your stream. Thanks.
Very detailed, but to start recording does one have to put on all of those settings? (I mean it sounds like a alot of things to turn on and set just to record)..js
Holy crap. I can't figure this out. I have a midi track that I am using this plugin that won't automate. How can I play it while recording it to a audio track to print them together since I can't automate it.
Hey, good video thanks for sharing your know how to beginners like me. I have a question, like I’m new to Logic Pro X and whenever I record a vocal track, I always have the music instrumental at the background of the vocal track, whereas I only want the vocal on that track. I guess I’ve been missing the configuration of the audio recording in Logic Pro X, please can you help me out by coming back on the basic audio recording configuration on Logic Pro X? Thanks in advance
One thing that I didn't see is when I'm printing FX and Summing, Mastering etc. and only want to record X number of bars/min, how to you tell logic to only record this amount WITHOUT the cycle engaged because I'd like to hit record, leave the room and it finish, not record endless loops.
I have scowered the net and even bought Logic Pro X for dummies, 3 weeks into my Logic Journey, and 3mins into this video, this is the best, clearest, straight forwardest clip i've seen.
I've been using Logic daily for the past three years and I still learned so much from you! Thank you for this!
I've been searching so long for someone to explain how to gauge db levels when recording. SO LONG!!! lol! This tutorial is gold.
I recently bought a copy of Logic Pro. Getting started on it is untenably complicated.
Considering this TH-cam video. By the 8-minute mark, we are well on our way to a deep dive. We have gone through a dozen setup menus, making critical and non-critical choices alike, in anticipation of putting musical instrument to microphone to Logic.
Compare to an Audacity startup for beginners: 1) OPEN Audacity 2) AUDIO SETUP - PLAYBACK DEVICE - SELECT 3) AUDIO SETUP - RECORDING DEVICE - SELECT 4) RECORD (you are now recording) 5) RECORDING LEVEL DISPLAY, adjust input device volume or gain as needed to achieve -15 to -10db 6) VIEW - SHOW CLIPPING - ON (nice to see) 7) STOP when done recording 8) FILE - SAVE PROJECT 9) FILE - EXPORT FILE AS AN MP3. (Easy)
Yours is clearly one of the better Beginning Logic videos, but what I wanted was to get to the end of recording a 3-minute song and saving it QUICKLY - by the 10-minute mark, say. THEN, I would have been ready to go back and begin tweaking. Alternative TH-cam video recommendations welcome.
Wow, you really covered some things I've been trying to find having watched a plethora of other videos, even via groove 3 tuts. Among the sought after knowledge was the bit about software monitoring vs. input monitoring. It alleviated a headache I've even tried to remedy for weeks. Very grateful. Thanks!
i dont understand how this channel and video isn't the most popular in the recording community
Two points... in the early section on software monitoring, it is worth pointing out that even if you assign a reverb for, say, a vocalist, that any effect that you insert is not baked into the recording. The audio goes straight into the channel, WITHOUT adding any effects. So if you used a guitar amp simulator, the actual recorded sound is straight out of the audio interface. Any effects assigned to a track are only audible in the PLAYBACK of that track's audio. A subtle point, but worth making.
Also, in Preferences>General>Editing, you can use the "Right Mouse Button is assignable... to set as a third tool. So that you can have three tools available, Left button, CMD Left button, and Right Button.
Easily the most useful video on recording in logic. Definitely saving this for reference. Thank you sir!
the best logic tutorial series so far
Probably the most concise and comprehensive introduction to Logic IMHO. Thank you!
Thank you so much for sharing the Logic Pro X (Cheat Sheet) It made me a subscriber to your amazing channel, I thank you for all your hard work 🙏🏽
Best videos on TH-cam for using Logic! Thank you x 1,000,000
Bless you homie 🙏🏿 u just helped a lot. I’m just getting started with Logic.
you are now my Logic Pro X guru. Thanks so much for clarity and ease!
Just found your channel. This tutorial is so helpful. Hope to see more tutorials and content from you
BEST TUTORIAL ABOUT VOCAL ON TH-cam!!! THANK YOU MAN!!!!
Even tho 3 years old I’ve learned so much in this one vid I’m definitely gonna subscribe
I was stumped trying to record my YPG-235, but this tutorial finally showed me what to do!! Thanks a lot! :)
-18 wow I’ve been so focused on hitting 0db for years ! Throw back to a analog ! Wow
Hey mate...special greetings from Egypt....hope all is well at your end with the COVID 19 situation.....found your video very useful...just wanted to say thanks...cheers
Cheers! Stay safe out there.
I wasn't even looking for anything you covered here, but I'm glad I watched. I learned so many things I was totally oblivious to.
Extremely helpful as I am converting from another DAW to LPX. Great many thanks!
thanks man, great tutorial, i use final cut pro x for my job, so i'm a little jumpstarted with it, but this video is helping me throught my guitar recording process. thumbs up!
Perfect video for me as I’ve just got Logic Pro x after using GarageBand for a while and was soooo confused lol
Just downloaded this❤️thanks buddy
This is the first video that really helped me to understand how to work with audio files in Logic Pro X. Thank you so much. You really have the gift of teaching. Thumbs up!
The awesome'est tutorial on audio recording..
New to Logic Pro. I love this. Best tutorial !
Record music, record beauty.
This value is crazy! Ti amo!
Thank you . Appreciated the info about recording audio and working with flex .
Best tutorial i have seen in quite a while. Thank you !
Rob, that was great... i was having issues with input monitoring and you solved it for me...diamond:))
El único que dio el tutorial con todo lo que sirve, gracias!!
As always by far the most useful video about a topic i am having trouble with. Thank you mate for doing this channel i have learned so much and your method of teaching and explaining things makes learning so much easier for me.
Great, thank you, that was exactly what I wanted to know for now!
Wow, my OCD just forced me to try and empty HIS trashcan...lol Great video though!
Excellent tutorial. Thank you
Logic of 'naughty' isn't 'not-ai', but 'not-naughty' is. Regarding how logic of compliment using a single ai can give a full diction of logic about one stereotype. Thus, logic pro x with 'not' brands, not-ai brands, not-dictionary-ai; it's humor about saying that everything is in the same pool.
Thus the logic pro x for 'not-ai' could be everything about anything of artificial intelligence business relations. Potentially, using Logic pro x only for 'compliment'/ 'not-ai'/ 'negation' could be the only business needed. With 'not-meat' the vegan trademark business could prove that 'not-vegan' is an internal software relation program that is simply saying 'not-ai' is running a logic search filter for 'vegan'; which, humorously, could mean that 'not-vegan' (and it's ai) is the most vegan-vegan. Because of how redundant business is when it's like 'you know what it is, and are sharing it, but do you know what it's not?' because of how sale's tactic for something like fem-ai/ feminism could make everything feminist even if it's not purposeful. Thus, everything being 'logic' could be interesting. Like, is logic sines, and 'not-logic' cosines?
Regarding how a liar isn't a not-liar. The humor when dealing with data collections and finance and records collections could make an entire architecture of stereotype and not-stereotype define parameters including all associations plausible.
Thus, 'not-illegal-ai' is probably a humorous subject when it comes to logic pro x and filtering/ censorship.
The dichotomy is like making an aeropay Wikipedia community Red Cross rebranding through Reddit to have an ai which is both the 'not-ai' and just 'ai'.
In Arabic, the theology and opinion of belief That there is such thing as 'not', as a or symbol is easily overlooked.
It is more like a comedy where they use 'god' for being good and 'gosh' for being better, and whisper 'not-gosh' while shouting 'not-god'. Like it's a one-way force of logical reasoning and contact. Like, the definition couldn't truly be ever believed nor understood to just be 'not-arabic'. Arabic-ai and not-arabic-ai.
Logic of Also, not-ai-arabic and not-ai-arabic-ai... (Ai-arabic, and ai-arabic-ai...).
The logic of humor being like a generator/ developer of computer systems having childish arguments where everything is only embedding in private dissociated peer-to-peer networking...
When theology limits science to a truth of religion like 'globe'/ 'size of Earth', 'mars-mirage space station making a projector laser nitrogen sheath across the sky through nuclear power ', etc. like, the truth of logic pro x would have different settings for interface with different brands and businesses.
When bank of America is God and another version of God is better but Gosh is the best of the better-better... (Redundancy about who to bank with and who to prefer to speak). Just one dollar, OneRep.
Excellent! Do you have a tutorial on recording tracks off of an analog 4-track?
So far the most useful and informative Thanks a lot.
oh my my! Thank you for sharing this tutorial. :)
Great insights for newer users like myself, thanks!
This was such a great video I learned so much! Thank you tremendously!
freakin amazing stuff..this is gold..thanks a million
I love logic shame my pos Komplete Audio 6 interface was one of the ones with a built in faulty phantom power .
This is extremely helpful. Thank you so much!
Do you have a video of you just step by step recording a basic song? This is a bit too in depth for me, as I just want to start making basic songs.
Well done man. So many great insights.
I really hope you do more videos.
Thanks
You are such a great teacher and I found this tutorial extremely helpful. Thank you so much for explaining so many important features.
Love this. My only question to it is we also always recorded hot because 16 bit only had 65000 lines of resolution so we were always wanting to screw asmuch resolution as possible. Today's 24 bit is way less critical. :)
SOOOO helpful!! Thank you so much, you saved me so much time! Much love
god damn these videos are so good. you guys just answer all the questions ive always had in one big video. wish i saw these earlier!!! keep up the great work!
This is what I've always needed. Thank you! :)
Wow, awesome! I haven’t watched the whole video yet, so maybe this question will be answered. But if not, how do I playback or export a song that starts *with* a pre-roll? Like no acoustic song start exactly on one, right? Doesn’t make sense to me. 🤔 I mean, sure, I can insert silence in the beginning and drag the regions out to the left before exporting...
very well done, thank you
You are awesome mate. Very helpful. 🙏🙏🙏
Thank you very much, amazin tutorial o7
Great video man really cool
Dope Information here . Thanks champ !
Wow thanks brother
I learned so much! Thank you!
This has helped me in school
Awesome!
thank you sir
THANK YOU
thank you very much !
really useful, thank you
you are a saint
I like this video very much, it is very useful.
Thank so you much for this video! I have learned so much from you 🙏🏻
Glad to help!
Thank u so much
Great Video.
I have like that video it has help me alot
thank you so much ！really appreciate it！
Is this continued anywhere please? Looking into Playhead, View and other missing parts of recording/editing (Not mixing)? This really was great by the way, thanks for your help. (Also CTRL when dragging does not turn off Snap temporarily for me it just brings up the Right Mouse Click menu. Neither does CTRL + SHIFT move very slowly freely)
Thank you so much, this is so much helpful
Invaluable. Thank you
Brilliant. Thanks for all your hard work.
You just got yourself another subscriber
You are great!
Im looking for guidance on the set-up needed on how I record an audio track onto Logic ProX using my Roland 08 ?
Hopefully you can help.. The problem I’ve been having is the audio coming in SO low when I’m recording my vocals. Also, I’m using a Yamaha mixer as my interface with my keyboard plugged into it. It seems as if it records a double when I have the music tracks playing when I only want my vocals on that track. Hopefully that makes sense. When I’ve recorded music or when I have an audio track playing to sing along to, it includes that audio into the vocal track. Please help!
Thanks my brother💯
I learned far more from this than any course I've taken on Udemy. Do you have a Patreon page yet?
Brilliant tutorial MoaM :) THX!
My focus is only on singing and recording the vocals... I somehow did not find this tutorial useful because when I am in my recording booth with Logic Pro, Preamp and the mic, I do not record vocals in loop. I simply go with one take, analyse how I did it, then either want to undo the take and go for the next take with more precision... If I like the take or part of the take, I simply want to know the short cut to keep the take aside and make the appln ready for next take on main audio track i am recording. But I dont see that sort of information available in the video
Thanks for the great video. Quick question regarding comping - let's say that I've gone through takes and am pretty pleased with my comping of multiple takes. But if I then record over these comps, then the new take automatically replaces the comped takes as my primary take. Is there a way to turn off this feature so my new take doesn't replace the comps?
Thanks!
If all the mics are feeding into a mixing board, how is does the mixing board feed each instrument into Logic Pro X so you end up with the different stems?
Sorry, I must be missing something, but did you show how two synths both connected by USB to the MacBook Pro can be played simultaneously to record their audio on two separate audio tracks?
I create Audio Track 1 and get Input from Synth 1, I hear it in LPX and can record it. Now I add Audio Track 2 and get input from Synth 2. I hear it in LXP and can record it. BUT, adding that second track for Synth 2 forces the first audio track's input to switch from Synth 1 to Synth 2 and makes that track silent no matter which keyboard is played.
Surely there must be a way to do real time simultaneous multitrack recording for two synths connected to LPX by USB -- without needing to buy extra hardware or interfaces. Maybe you can help and include a new post about that audio recording situation to your stream. Thanks.
Very detailed, but to start recording does one have to put on all of those settings? (I mean it sounds like a alot of things to turn on and set just to record)..js
Thx 🙏
Thanks a lot, really good tutorial. I tried the solo tool but didn't do the frame by frame movement, do you know why?
There is an Apollo on the table and an Audio Scarlet in the settings??? ;)
Holy crap. I can't figure this out. I have a midi track that I am using this plugin that won't automate. How can I play it while recording it to a audio track to print them together since I can't automate it.
Hey, good video thanks for sharing your know how to beginners like me. I have a question, like I’m new to Logic Pro X and whenever I record a vocal track, I always have the music instrumental at the background of the vocal track, whereas I only want the vocal on that track. I guess I’ve been missing the configuration of the audio recording in Logic Pro X, please can you help me out by coming back on the basic audio recording configuration on Logic Pro X? Thanks in advance
best video ever!
One thing that I didn't see is when I'm printing FX and Summing, Mastering etc. and only want to record X number of bars/min, how to you tell logic to only record this amount WITHOUT the cycle engaged because I'd like to hit record, leave the room and it finish, not record endless loops.
Love it!
I hope they update to clip gain..then logic would be killer