Since the motors are wired backward, his left and right are reversed on joystick hence the faux pas. some of these motors have to be connected in series and some in parallel to the sabertooth controller depending which way they face as in push or pull.
Very well explained I’m not able to weld anything so brackets and lots of self motivation the motors are very hard to mount without the original wheels. thanks for your video
That has a very high degree of awesomeness :) ... I like it a lot.... I started to build a wheelchair based apple collecting robot (called Pip) a few years back in 2010, but after reverse engineering the SharkBus protocol (used by the joystick to communicate with the motor controller) and adding ultrasonic range finders onto it, I never actually got around to making it collect apples... I'll definitely be revisiting my hacked wheelchair one day. As once wheelchair hacker to another, I'd like to say "Nice work Sir!!" ... Cheers!!
You've got a self-propelled walk-behind mower. Replace that left front wheel with a pulley and hook it up to an alternator with a belt to keep your battery charged up.
You'd have a lot less resistance if you'd put larger rubber tires on the fwont of the mower.. It looks like you built this from a jazzy scooter for the elderly, is that right?
So you want just the motor # schematic and option for couple farther questions, I have to put the schematic together or make you a small video of all necessary component plus Arduino sketch plus graphical software for your IPhone or Ipad ? Or do you want the built module with loaded software + software that you put on your IOS devices? you have to make a frame + wheels (motor) + batteries and all other component like screw anchor and .... where are you located At?
HI.I would like to ask you, where you got the radio, I mean the control to make the lawn mower to move,what are the elec tronic parts, cuold you show me please
hey great video.hey could you please help. could you please tell what's wrong with my project. well when I try to move the wheels the red led its flashing.end the motors just cranks. end how do I have to connect the motors cables. because each motor has 4 cables. do I have to connect one red end one white together end one black end white together too or only red end black. end why the motors just cranks.I hope you can help me.thank you
Hi; I like your lawnmower, and i plan to build one have the parts for it but need the measurements of the frame. Would you facilitate or sale them to me. Great machine.
Great idea and construction. I'd like to build one too. Can you tell me the make and model of the motor controller please and where to buy it. Can you also tell me the detail of the transmitter & receiver too please. Thank you. Karen.
Hi; I'm Danny , I like your R/C LAWNMOWER i'm a disable person the i can not walk to much and i like to have a r/c lawnmower cause of my condition, can you tell me please the brand or model of the motor controller and where to buy and also the transmitter and receiver or how much it will cost me if you will buy the motor, transmitter, receiver & hook it up ready to work & run.I will let someone to make the frame for me.THANK YOU FOR YOU KIND CONSIDERATION .
This is so simple.. its ridiculous. Great engineering!! Bravo
I like the idea of keeping mower integrity... rather than a total strip-down and pimp...
Since the motors are wired backward, his left and right are reversed on joystick hence the faux pas.
some of these motors have to be connected in series and some in parallel to the sabertooth controller depending which way they face as in push or pull.
Very well explained I’m not able to weld anything so brackets and lots of self motivation the motors are very hard to mount without the original wheels. thanks for your video
Good idea. You must have a VERY smooth lawn to use front casters that small.
I did changed the front wheels to bigger ones but I did not update the Video.
That has a very high degree of awesomeness :) ... I like it a lot.... I started to build a wheelchair based apple collecting robot (called Pip) a few years back in 2010, but after reverse engineering the SharkBus protocol (used by the joystick to communicate with the motor controller) and adding ultrasonic range finders onto it, I never actually got around to making it collect apples... I'll definitely be revisiting my hacked wheelchair one day. As once wheelchair hacker to another, I'd like to say "Nice work Sir!!" ... Cheers!!
You've got a self-propelled walk-behind mower. Replace that left front wheel with a pulley and hook it up to an alternator with a belt to keep your battery charged up.
You'd have a lot less resistance if you'd put larger rubber tires on the fwont of the mower.. It looks like you built this from a jazzy scooter for the elderly, is that right?
The remote is the R/C remote with two channels or more you can buy them from Ebay or hobby store.
My nam Lam Dieu, I would like to ask You , where You get the set of electronic control from hand radio , receiver and server to connected to 2 morors
@0:50, without the lawn mower, frame, batteries (option), remote controller (option), and drawing how much would you charge?
So you want just the motor # schematic and option for couple farther questions, I have to put the schematic together or make you a small video of all necessary component plus Arduino sketch plus graphical software for your IPhone or Ipad ?
Or do you want the built module with loaded software + software that you put on your IOS devices? you have to make a frame + wheels (motor) + batteries and all other component like screw anchor and ....
where are you located At?
Check the updated video that I used Iphone and Ipad to control the lawnmower.
@@Mark1Jordon1 Thank you for the response. I made a mistake how I wanted. I have to rethinking what parts that I wanted.
It seem to go pretty fast where you get this motors and what type can go this fast. Will it works for just 12 volt and how much power can it pull?
Great video and great job on the mower! It looks like so much fun.
Hey Mark Great Job
HI.I would like to ask you, where you got the radio, I mean the control to make the lawn mower to move,what are the elec tronic parts, cuold you show me please
hi, do you recharge the battery?
Where can I get the motors and electronics remote? How much it cost for this project?
The cost is about $400 and you need to do some frame welding
Is there room to put grass catch bag on your lawnmower?
You are gong to build longer frame if you needed a grass catcher.
How fast does it goes in mph? How long does it runs before battery run out (30 min)? What Amp does the battery have?
hey great video.hey could you please help. could you please tell what's wrong with my project. well when I try to move the wheels the red led its flashing.end the motors just cranks. end how do I have to connect the motors cables. because each motor has 4 cables. do I have to connect one red end one white together end one black end white together too or only red end black. end why the motors just cranks.I hope you can help me.thank you
Hi;
I like your lawnmower, and i plan to build one have the parts for it but need the measurements of the frame. Would you facilitate or sale them to me.
Great machine.
Is the Frame Aluminum?
No,
@@Mark1Jordon1 What kind of metal did you use?
Fencing post metal 2"x 2" from homedepot "Black Steel Fence Blank Post"
Cool hadn't even thought of that Very nice! Thanks for the response!@@Mark1Jordon1
cool except you got your left and right backwards. lol
Check this link as well:
iPhone & iPad Controlled Mower
Good job.
if you don't mind can you help me build one ? please let me know if that is a possibility.
Thanks
Great idea and construction. I'd like to build one too. Can you tell me the make and model of the motor controller please and where to buy it. Can you also tell me the detail of the transmitter & receiver too please. Thank you. Karen.
nice Design
Hi; I'm Danny , I like your R/C LAWNMOWER i'm a disable person the i can not walk to much and i like to have a r/c lawnmower cause of my condition, can you tell me please the brand or model of the motor controller and where to buy and also the transmitter and receiver or how much it will cost me if you will buy the motor, transmitter, receiver & hook it up ready to work & run.I will let someone to make the frame for me.THANK YOU FOR YOU KIND CONSIDERATION .