Thank you for the detailed info and suppliers you used from start to finish with your project. I will built my remote control mower unit from your design you made it very simple to fallow your instruction. Thanks once again.
If you desire more fine control of the mower look at your transmitters setup and find the Exponential (Expo) setting adjustment for the stick you use to control the movement. By increasing the value you will dumb down the response of the stick around its center point. You will still get full speed, just not so soon, not at the moment you touch the stick. So slow fine control is gained by adjust the expo value. My mower also has FPV features so I can cut the grass while sitting in my living room chair and view everything as I drive. Doing this also improves the experience because by now you have noticed that its hard to know how close you are when you are standing across the yard and more importantly, you dont have to think backwards when the mower is coming toward you, ever. Its like you are inside the mower driving it.
Good video, and good RC mower, BUT there is one, but significant, difference between ROBOTIC and Radio-Controlled ;) Robotic means it controls itself autonomously, without ANY manual control at all ;) Like robotic vacuum cleaner for example ;)
Thanks for the great video. Very informative. I am building an RC lawnmower and was wondering what size of battery you would recommend? Have you found the 22 amp hour batteries to have enough capacity? (My lot size is about 60 ft by 100 ft minus the house). Also, have you been happy with the Cytron motor driver? Thanks for your help. Take care, Jeff
Yea, those batteries have been plenty. One will actually get me through my yard. I've had no issues with the cytron, just ran my first mow this year. It survived the Indiana winter out in the cold too.
@@AdamSmasher ok cool I never heard of that town or city or area. I googled it I see it around Evansville. We are about 4 hours apart. If your ever around my way your welcome to swing by I like tech and me and my father like restoring classics some newer type of vehicle's.
A great project. Adam, after using this for awhile do you have a list/video of changes/improvements that you would do it you did it again? It clearly works as is but I know as an inventor you are constantly thinking of a "better way". Again, thank you for sharing.
Thank you. I will try to get a follow-up video out soon. Tires are an issue in dew or damp grass, and they slip under high torque (24v) on dry grass. Also, it needs additional height adjustment in the rear.
@@AdamSmasher thanks Adam. Sounds great. I forward to it. And thank you again for putting everything out there for us. I see your design around the internet a lot with great success stories.
I kind of wish he had bigger wheels. Not all of us have a flat lawn. Plus I kind of wish he showed us step by step on each connection we are all good at electronics
This build is also on Instructables. There you will find a very clear wiring diagram. If you still are not sure after seeing that, this project may not be for you.
@@AdamSmasher No I think I got it down. I saw another video that used that smart board chip. He put all four wheels. It gives it more of a beef look. Then I watched another video that has a wiring diagram it's easy to understand. But I like the idea.
Hey nice build ! Can you explain a little how your controls are set up ? When you turn left or right the motors go in opposite directions. I’m a noob lol I have the same controller . I’m guessing it’s in (mixes). Just can’t get it to mimic that
where do you get the motors. I know they are from wheel chairs but where . and you have 2 wheel motor drivers listed. use either one? also I already have a new rear drive self propelled toro. could that be used as wheel motors?
Ed, I get them used from ebay. You can use either controller, but the Cytron is more user friendly. If you use the Sabertooth you will have a few adjustments to make. Also, the sabertooth does not come with 3 pin hobby wires that you will need for the project. The Cytron does. Happy building!
What size of tires are you using? I have 10.75x3.25 and would like larger diameter size. On my build I used two eye bolts with washers and lock washer. Then treaded a metal hose clamp thru. Motors are very secure. And you can use the bottom part of the handle as a roll bar or light/equipment mounting Just drill the holes out and mount.
I'm almost ready to button mine up and take it for a spin. Have same controller and Tx. I would like to use a step down transformer for the RX and servo separate from the controller. I'm setting up a remote kill for the power/controller as well as the engine. In no shape to go chasing after it😮. Also been testing "relays" to control the power feed. I think its been solved. Started out with a for SW-3 solinoid. Big problem is heat build up from the internal coil. It draws 5amps to keep the circuit closed that's why it's getting hot. Tried on the negative side and still gets hot. So starter solinoids are out. Back to the controller power issues. Think running just the signal wire might work. Waiting for reply back from Cytron.
@@TheWaterman1000 I have a video on here where I used a servo and step down for my kill switch. Please let me know if you come up with a good dependable relay.
Update: just took the mower out today for a test. Looks like I found a relay for power is working for now. Used a 30amp fuse for testing and everything stayed pretty cool didn't get hot. I'll edit a video and upload for some feed back.
Sir, in what terminal do I connect RC connector from the motor driver to the transmitter. Planning to buy the same motor driver and rc receiver. Thank you.
I didn't read all comment's but my question is ! Beside's the price of the orginal mower $$ how much does you're coversion cost ? and regardless of the work involved.... ! Isn't the total cost of you're project more expensive then bying a brand made fabrication mower ? Because to my knowledge, the principe of DIY project is made to save on cost isn't it ??
Awesome build video mate ! I was wondering if you can help me finding a wheels like yours for I am using the same motors like yours. I will greatly appreciate it if you can give me a link where to buy them. Thank you and have a safe weekend !
@@AdamSmasher Thanks Adam ! I really appreciate it. I did purchased it and it was the last pair. Wow ! Thanks again and have a safe Mother's Day, enjoy the sunday with your family. See you around mate !
Can you replace a basic RC receiver with an Arduino to make it autonomous? Basically then use gps/waypoints with it. I want to use a cordless electric mower and remove the blade and motor to reduce weight. Then use Arduino.
@@alfredzeiler The main adjustment comes from the front casters, with the front of the blade angled it will cut right. However, I can adjust the back by adjusting the tie cables if I need to. Hope that helps!
Sorry for the late response. Check ebay, that's where I found mine. Just search for used wheelchair wheels. Some have a keyed shaft with a spline and others have 5 lugs/nuts. Hope this helps.
Ok. I used 1/2 bolts with a spacer made out of a 1/2 nut. I will use a rod later. I also use eye bolts and hose clamps. Solid as a rock. Ran into a big problem. I have 10.75x3.25 wheels and the deck is too low. Aarrgg thinking is I can find larger diameter wheels around 14 inch will work. Also been trying to find alternatives. Go cart, universal etc.,. I don't want to drag the motors in the grass or near the ground. One more thing, I used the bottom part of the handle as a equipment and roll bar. Just drill out the holes.
@@AdamSmasher Didn't work for me, I just ordered the smartdrive that you used, hopefully that gives me more luck. Did you have to bind your controller before using it?
@@mrlilstrom It's been awhile but I believe I just inverted some controls and changed my mix. This was my first experience with rc controllers so I was a bit confused at first myself.
![ถ้าเธอไม่รักทำไมไม่บอกฉัน - PAPER [ Musicvideo ]](http://i.ytimg.com/vi/pfeBhDda7m4/mqdefault.jpg)
![[Live] : ONE FIGHT NIGHT 22 วันนี้!! "สมิลลา vs นาตาเรีย"](/img/n.gif)
Thank you for the detailed info and suppliers you used from start to finish with your project. I will
built my remote control mower unit from your design you made it very simple to fallow your instruction. Thanks once again.
Thank you, I am glad it helped you!
where did you purchase the motors and wheels from GREAT VIDEO thank you
@@arthurkuntz1525 ebay
@@AdamSmasher thanks for the detailed setup, which seller did you purchase them from and how much?
@@bobx3646 The seller was teamxi, it was 150 for motors with wheels & tires.
The box opening is so loud it hurts the ears yet I can still just barely hear the voice. In the intro, the kid's voice was perfect.
Yeah, and the title music was clipping in my sound system.
I built one just like yours and it works amazing. Thanks for the tutorial.
Thank you for your contribution Adam.
If you desire more fine control of the mower look at your transmitters setup and find the Exponential (Expo) setting adjustment for the stick you use to control the movement. By increasing the value you will dumb down the response of the stick around its center point. You will still get full speed, just not so soon, not at the moment you touch the stick. So slow fine control is gained by adjust the expo value. My mower also has FPV features so I can cut the grass while sitting in my living room chair and view everything as I drive. Doing this also improves the experience because by now you have noticed that its hard to know how close you are when you are standing across the yard and more importantly, you dont have to think backwards when the mower is coming toward you, ever. Its like you are inside the mower driving it.
I did the field testing for that controller for RC lawnmower use.
Thanks men ur design was super simple yet effective I love it
That’s amazing! Love shots like this!!!
loved the vid at the .30 sec mark just because it was a father, son project.
Remarkable job !! Thank you
Love it, nice work, i am in a Wheelchair and could definitely use a rig like that!!
I cant believe you are doing this project on your beautiful persian carpet! Your wife will have a fit when she sees this!
Oh super Good afternnon , Have a nice day ahead
Thank You
It looks so clean, well done
Thank you!
In similar projects what do you suggest the type of circuit breaker or fuse?
Thanks lovely video!!
Gorgeous swty
ببجي ببجي العاب العاب
fabulous
I have looked at this again and really enjoyed your project
Nice build! Have you covered your motor driver? Aren't you worried about grass or water getting on there and shorting out something?
Thanks! Yea, It has crossed my mind a few times. I will be making a cover I can slip over the top at some point.
Smokin Looking Superb (as always)
ىذ
good job, bro
Well done sir 👍🏻
Thanks
Hello
I just saw your video and was wondering how the mower worked for the last year. Good video thanks
Works well, I've had minor issues.
Absolutely awesome mate! I noticed you have listed the sabertooth 32 and the citron drive duo, which one did you use?
Aww so Cute
Good video, and good RC mower, BUT there is one, but significant, difference between ROBOTIC and Radio-Controlled ;) Robotic means it controls itself autonomously, without ANY manual control at all ;) Like robotic vacuum cleaner for example ;)
Should make an Electrik Version of it. 🤘🏻😎🤘🏻
That is a dope setup love it! How long does the battery typically last before during?
Thanks! I have used a single battery to cut 3 small yards before it got sluggish. You could always add quick connects for fast swapping of batteries.
@@AdamSmasher Your welcome. Ok true.
Thanks for the great video. Very informative.
I am building an RC lawnmower and was wondering what size of battery you would recommend?
Have you found the 22 amp hour batteries to have enough capacity?
(My lot size is about 60 ft by 100 ft minus the house).
Also, have you been happy with the Cytron motor driver?
Thanks for your help.
Take care,
Jeff
Yea, those batteries have been plenty. One will actually get me through my yard. I've had no issues with the cytron, just ran my first mow this year. It survived the Indiana winter out in the cold too.
@@AdamSmasher I see you said you from Indiana What part? I'm from Indiana also. I live in Marion.
@@tpe690 Vanderburgh
@@AdamSmasher ok cool I never heard of that town or city or area. I googled it I see it around Evansville. We are about 4 hours apart. If your ever around my way your welcome to swing by I like tech and me and my father like restoring classics some newer type of vehicle's.
Simple and nice build! Where to buy motors and what motor ratings did you used? Did you try how it performs on a slope?
Wheelchair motors, amzn.to/3HJoybc. Works great on a slope.
I LIKE THIS VIDEO
Please look at my motors(different gear box) will that work?
Are those jazzy pride mobility motors?
im building mine this summer
Son should be proud!
Thank you very much
I would not be surprised if they come out with a zero turn like this
A great project. Adam, after using this for awhile do you have a list/video of changes/improvements that you would do it you did it again? It clearly works as is but I know as an inventor you are constantly thinking of a "better way". Again, thank you for sharing.
Thank you. I will try to get a follow-up video out soon. Tires are an issue in dew or damp grass, and they slip under high torque (24v) on dry grass. Also, it needs additional height adjustment in the rear.
@@AdamSmasher thanks Adam. Sounds great. I forward to it. And thank you again for putting everything out there for us. I see your design around the internet a lot with great success stories.
@@AdamSmasherdid you consider tyre tacks? They might provide a bit of extra grip
could it work on saplings about the size of a big toe ???
the information for the motors?
I kind of wish he had bigger wheels. Not all of us have a flat lawn. Plus I kind of wish he showed us step by step on each connection we are all good at electronics
This build is also on Instructables. There you will find a very clear wiring diagram. If you still are not sure after seeing that, this project may not be for you.
@@AdamSmasher No I think I got it down. I saw another video that used that smart board chip. He put all four wheels. It gives it more of a beef look. Then I watched another video that has a wiring diagram it's easy to understand. But I like the idea.
where did you get the motors and wheels from
hey man what was your run time on those batteries? i have 2 7ah 12v batteries.
Hey nice build ! Can you explain a little how your controls are set up ? When you turn left or right the motors go in opposite directions. I’m a noob lol I have the same controller . I’m guessing it’s in (mixes). Just can’t get it to mimic that
Thanks! Which motor controller are you using?
It's been a few years since you posted. How was the functionality? Battery duration, terrain capability, any upgrades or changes since you've built it
Spectacular work! The two motors for the wheels are not available on amazon, could you tell me another type of motor that is fine? thank you
Thank you! Search ebay for used wheelchair motors.
@@AdamSmasher Thanks! Ps: how many Rpm and NewtonMeter has the 2 motors?or watt?
@@MattiaRaggiDrum 75 RPM at 12v or 150 RPM 24v if I remember correctly.
@@AdamSmasher Thanks
Hello what drive model are you using?
You help HUMANITY!
where do you get the motors. I know they are from wheel chairs but where . and you have 2 wheel motor drivers listed. use either one? also I already have a new rear drive self propelled toro. could that be used as wheel motors?
Ed, I get them used from ebay. You can use either controller, but the Cytron is more user friendly. If you use the Sabertooth you will have a few adjustments to make. Also, the sabertooth does not come with 3 pin hobby wires that you will need for the project. The Cytron does. Happy building!
Is this one the build that cut the grass better? I've read somewhere that you did 2 builds. Thanks for this video!
It is. They both cut well but one was too fast at 24 volts. This is a better build for sure though.
@@AdamSmasher thanks again
Very nice dad bro!
Thanks bro!
Is there a link to the rear wheels used? Thanks.
nice video i was looking for a link to the motors kit you used , the 2 motor kit
Search ebay for used wheelchair motors.
Do you have the reference for off-road wheels adapted to the engine axle?
Wheels adapted to an engine axle? Elaborate please.
Awesome build! I may have missed it but where did you get the two motors?
I got them used off ebay.
@@AdamSmasher Thanks!
Very impressive. Btw, link for the DC drive motors ? They look awesome !
Thanks! I got them used on ebay.
@@AdamSmasher I've looked on ebay and scrolled through many... unfortunately I can't find these. So sad, they really look awesome !
@@PhG1961 Search for seller called teamxi.
I didn’t see what wheels and hub you used of this video. Any way you could send that over?
I bought my wheels and tires used off ebay.
This project can added solar panel for the battery?
I saw a build like that on here. It can be done.
where did he get the motors from
Bro I really interested with your techno.🙏
Where did you get Theron swivel wheel setup from ?
There is a link in my video description.
What size of tires are you using? I have 10.75x3.25 and would like larger diameter size. On my build I used two eye bolts with washers and lock washer. Then treaded a metal hose clamp thru. Motors are very secure. And you can use the bottom part of the handle as a roll bar or light/equipment mounting
Just drill the holes out and mount.
I'm using the stock tires too, I have been eyeballing some 10x5's though.
I'm almost ready to button mine up and take it for a spin. Have same controller and Tx. I would like to use a step down transformer for the RX and servo separate from the controller. I'm setting up a remote kill for the power/controller as well as the engine. In no shape to go chasing after it😮. Also been testing "relays" to control the power feed. I think its been solved. Started out with a for SW-3 solinoid. Big problem is heat build up from the internal coil. It draws 5amps to keep the circuit closed that's why it's getting hot. Tried on the negative side and still gets hot. So starter solinoids are out. Back to the controller power issues. Think running just the signal wire might work. Waiting for reply back from Cytron.
@@TheWaterman1000 I have a video on here where I used a servo and step down for my kill switch. Please let me know if you come up with a good dependable relay.
Update: just took the mower out today for a test. Looks like I found a relay for power is working for now. Used a 30amp fuse for testing and everything stayed pretty cool didn't get hot. I'll edit a video and upload for some feed back.
@@TheWaterman1000 I like how you used the handle for your frame, cool build. Let me know if that 30 amp holds up.
Question my friend... how did you power the RC Receiver ?
The motor controller has a 5v output.
What motors are those?
Thanks Adam. Can you provide the part lists and let me know where I could purchase these? Thanks
Parts linked in video description.
Sir, in what terminal do I connect RC connector from the motor driver to the transmitter. Planning to buy the same motor driver and rc receiver. Thank you.
www.instructables.com/Build-a-Robot-Lawnmower/
I didn't read all comment's but my question is ! Beside's the price of the orginal mower $$ how much does you're coversion cost ? and regardless of the work involved.... ! Isn't the total cost of you're project more expensive then bying a brand made fabrication mower ?
Because to my knowledge, the principe of DIY project is made to save on cost isn't it ??
Awesome build video mate ! I was wondering if you can help me finding a wheels like yours for I am using the same motors like yours. I will greatly appreciate it if you can give me a link where to buy them. Thank you and have a safe weekend !
www.ebay.com/itm/133730628075?hash=item1f22f771eb:g:jTgAAOSwB7pfz420
@@AdamSmasher Thanks Adam ! I really appreciate it. I did purchased it and it was the last pair. Wow ! Thanks again and have a safe Mother's Day, enjoy the sunday with your family. See you around mate !
Nothing like metal chips in the living room carpet!
Can you replace a basic RC receiver with an Arduino to make it autonomous?
Basically then use gps/waypoints with it.
I want to use a cordless electric mower and remove the blade and motor to reduce weight. Then use Arduino.
I believe so. I have seen some other projects where they have been somewhat successful.
In your item list it has 2 batteries it that correct? Also how do you charge them?
You can run with one or two, 12v or 24v. If you run at 12v just use a simple float charger overnight after each use.
Nice. I have a question for you. Did you make any modifications on the motors?
No. I bought them used and the brakes had already been removed.
Where did you buy the motors?
Thanks
@@saupham8192 Used wheelchair motors off ebay.
How big is motor in power/size?
Hello my friend where did you get the parts to build the rc mower
Links are in the description.
What type motors did you use and where did you purchase them.
Ebay. Search for used wheelchair motors. I have used jazzy and pride motors with no issues.
Can you adjust the height? How did you make sure it was level?
Yes. The caster wheels I used are adjustable.
@@AdamSmasher I don't see how the back wheels are adjustable. Am I missing something?
@@alfredzeiler The main adjustment comes from the front casters, with the front of the blade angled it will cut right. However, I can adjust the back by adjusting the tie cables if I need to. Hope that helps!
Just need a charging coil to keep the battery toped off. It would be perfect.
What type of wiring gage you used.
What are max amps.
10 guage for battery. roughly 60 amps I believe.
@@AdamSmasher what about the wiring gage to motors from controller?
@@pol_khol____6405 I used what I had at the time from another project. 22 awg I do believe.
where did you by the cytron smartdriveduo-30? thanks.
also what the other two pcs called, where the SmartDrive sits on? thanks maybe just full parts list lol thanks a bunch!
@@oscarreal2221 It's all linked in my video description sir. Thanks for watching!
Where did you get the rear brackets from? I ordered the same jazzy pride motors and a hefty 60a 40v dual motor driver
what bracket?
@@AdamSmasher the one on the back that the motor mountain to
@@AdamSmasher I have the same motors from a jazzy pride
@@sofghost6663 I attached them to my handle bracket that was already in place
@@AdamSmasher oh ok. Are the motors at a fixed height or can they be adjusted for blade height?
can find the Sabertooth motor driver:
on amazon any idea?
Use cytron smartdrive duo 30.
Cute kid, so..... I subscribed! 😁
Awkward...
@@SnowRocker88 sick mind there bud 🤢
what motors are you using....I could here on the video
They are pride mobility motors. I've used jazzy chair motors too.
@@AdamSmasher thanks
Hi Adam...please tell me what kind of motors you purchased for this. Are they with high rpm? Please advise...your videos are of high values... regards
This build had pride mobility motors. They can run at 12v or 24V, I believe at 12v it's like 75 rpm and at 24 it's 150 rpm. Hope that helps!
Can i use an " Ego electric push lawn mower" instead of a gas lawn mower?
I don't see why not. Go for it!
Adam can you tell me where and what tires are needed for the motors you installed? TQ
Sorry for the late response. Check ebay, that's where I found mine. Just search for used wheelchair wheels. Some have a keyed shaft with a spline and others have 5 lugs/nuts. Hope this helps.
What if someone made a universal kit for major brand model mowers?
What size sabertooth do I need to run 44 inch zero turn and what motor weels I need
This setup can support over 500lbs, just run the motors at 24v for max power.
How did you come up with 3/8 rod when the motor hole are 3/4 inch.
I actually used 5/8. I just used what I had.
Ok. I used 1/2 bolts with a spacer made out of a 1/2 nut. I will use a rod later. I also use eye bolts and hose clamps. Solid as a rock. Ran into a big problem. I have 10.75x3.25 wheels and the deck is too low. Aarrgg thinking is I can find larger diameter wheels around 14 inch will work. Also been trying to find alternatives. Go cart, universal etc.,. I don't want to drag the motors in the grass or near the ground. One more thing, I used the bottom part of the handle as a equipment and roll bar. Just drill out the holes.
Problems solved... Modified the design to even allow high adjustment if needed.
Having a problem finding the rear wheels could you help me out
Did you check ebay?
Красавчик
Can I know what size name of wheels you used for the motor
Sure, search ebay for Pride Jazzy Pr1mo wheels. 14x3.
Can I connect the receiver into the “alternative driver” you have listed?
It appears the pinout is the same, assuming the driver works as it should, yes. Please let me know if you have success with it.
@@AdamSmasher Didn't work for me, I just ordered the smartdrive that you used, hopefully that gives me more luck. Did you have to bind your controller before using it?
@@mrlilstrom That's unfortunate but good to know, thanks for the update. I did have to bind it and make a couple adjustments.
@@AdamSmasher thank you for responding super quick!!! What adjustments did you have to make? I think I’m making this harder than it needs to be 😂
@@mrlilstrom It's been awhile but I believe I just inverted some controls and changed my mix. This was my first experience with rc controllers so I was a bit confused at first myself.
건설 현장. 콘크리트 휘니셔. 만들면. 좋겠다
Could you send me a parts list and were you ordered it from
All parts are listed in my video description. Cheers!
Hey Adam, how often does the small battery need to be recharged?
Thanks in advance
Often, every couple cuts in an average yard. Just keep it on a battery tender when not in use.
@@AdamSmasher Thanks again, how is the system holding up 2 years on?
@@SOPHOCLESIFY Nothing has failed as far as parts. I'd build it a bit different if I did it again. I did have a wheel nut back off and get lost.
My motors have a yellow and white wire coming out of them what do you run those to?
Do you mean additional wires? If so that is for the brakes that were previously wired... You can just cut them off.
@@AdamSmasher Yeah I have the red and black coming out of the motor but also a yellow and white
@@themuffinman815 Yea, those are just the factory brake wires.
Which battery did you use and how long does it last
a single 22 amp hr will mow 2-3 yards before getting sluggish.
@@AdamSmasher that little battery last that long😳