FREE files for 3D Printed RC Excavator | New Bucket

I saw the need for smaller bucket for my 3d printed RC excavator. So I printed one. And the files are free for you, as always.
You can find the files for the bucket at thingiverse:
www.thingiverse.com/thing:543...
Part1: Tracks and rollers • Free files for 3d prin...
Part 2: Undercarriage • Free files for 3d prin...
Part 3: Slewing ring: • Free files for 3d prin...
Part 4: Boom, Arm and bucket: • Free files for 3d prin...
Here are some links to the hardware I have used. they are afiliate links. Which means that if a lot of you order a lot from these links, I might get a few bucks. It dos NOT cost you anything more :-)
---------------------------------------------------------------------------------------------------------------------
Track motors 12V 50rpm: s.click.aliexpress.com/e/_AXeNhB
Slip ring, 4ch 5A: s.click.aliexpress.com/e/_AVaxxj
Actuator motors, 12V 160rpm: s.click.aliexpress.com/e/_DCB...
Universal joint actuator, 6mm-8mm: s.click.aliexpress.com/e/_AsznQp
Actuator T8, lead 8mm, length 150mm: s.click.aliexpress.com/e/_ASGVmp
Track wheel axle connector, 6mm: s.click.aliexpress.com/e/_AeF6Ct
Balls for slewing ring, 8mm 50pcs: s.click.aliexpress.com/e/_ALYzfb
Pinion and ring gear for slewing ring: s.click.aliexpress.com/e/_A80WbJ
Slewing ring motor 12v 30rpm: s.click.aliexpress.com/e/_AMuZbL
Micro limit switches: s.click.aliexpress.com/e/_APklJx
ESC for everything in the excavator. Hobbywing 1060 You need 6pcs: s.click.aliexpress.com/e/_AFFrOp
M3 screws. You need loads of them in different length. a lot of 35mm for the tracks: s.click.aliexpress.com/e/_A0Ew6d
M3 countersunk screws, at least som 10, 12 and 14mm: s.click.aliexpress.com/e/_A4ujEZ
M3 nylock nuts. You need a lot of these too: s.click.aliexpress.com/e/_Arkzr3
M3 nuts. And regular M3 nuts: s.click.aliexpress.com/e/_A64A1j
-----------------------------------------------------------------------------------------------------------------------
If you want to se how to use Autodesk Fusion 360 for your rc parts needs, take a look at this playlist on how to make Fusion 360 easy:
• RC parts and equipment...
Make sure to subscribe to my channel so you don't miss out on any content.
It's free for you, but means a whole lot to me.
th-cam.com/users/YetAnotherR...
If you want to 3d print your own rc excavator, follow along as I will release the free STL-files when I'm done.
Thanks to @burnie222rclasseanhanger6 for a lot of help and technical discussions. Make sure to check him out too see how awesome it is possible to do 3d printed RC machines when you are good at it.
And remember to check out @KobtsevRC where I got my awesome hat from :-)
#3dprintedrc #rcexcavator #freeSTL
*************************************************
Shot on:
Sony ZV-E10
*************************************************
[e-mail]

[@YetAnotherRcChannel]

Did you print and build the excavator yet?
And did you change anything?
Would be cool to know how many are out there.

[@ModelAV8RChannel]

I see you're still up to helping out your community with free files. Great thing to do man, and well done.

[@YetAnotherRcChannel]

Thank you very much.
But it is so cool to see someone actually building stuff from my designs.

[@zhult1992]

@@YetAnotherRcChannel i think im about to start

[@dutchloveRC]

great product my friend!! thx for sharing

[@YetAnotherRcChannel]

Thanks for watching ✌️
Really appreciate it ☺️

[@gamesgonenuts]

enjoyed this you make such cool projects

[@YetAnotherRcChannel]

Thank you ✌️
Glad you like it 😊

[@rcplaytime]

That's awesome dude 👍👍 I'm surprised the glue is strong enough to hold it together under that much force,impressive 👍👍👍😀

[@YetAnotherRcChannel]

Yeah.
Makes me think that I'm over engineering everything 😂

[@namesurname133]

I think it lacks weight adding weights to the chassis would be a great idea

[@YetAnotherRcChannel]

Plenty of room for weights in the chassis👍

[@cat-cambodia1801]

Good job 👍😊

[@YetAnotherRcChannel]

Thank you!

[@CLAUDIOSRC9529]

cool cool Subscribed

[@YetAnotherRcChannel]

Thank you for your support. Really appreciate it!
😀

[@FMDRCConstruction]

Nice new bucket, but why do you print it in halves? 🤔I always print mine as one piece, granted, it means you need supports.😅 Very curius to see how well it holds up over time😉

[@YetAnotherRcChannel]

I print it in halves to minimize the need for supports. Thinking about going one better and print the sides seperate and the curve as one piece.

[@FMDRCConstruction]

@@YetAnotherRcChannel i guess if it holds up, its great😉👌

[@YetAnotherRcChannel]

@@FMDRCConstruction been holding up so far. Just hoping it will continue doing so.
Do you print yours on the side?

[@241cfii]

Any chance you could show us how to setup the excavator on a stock RadioMaster Zorro? I assume it is similar to the setup you did on other RadioMaster but not sure.

[@YetAnotherRcChannel]

It should be the same.
I'll have a look at it👍
Thanks for the input✌️

[@klauslengemann1763]

Vielen Dank.

[@YetAnotherRcChannel]

You are welcome.
And thanks for watching ✌️

[@TheDarielMF]

Greetings¡¡¡ which is the model for reference photos and the SCALE of your excavator? I love it excellent work¡¡¡

[@YetAnotherRcChannel]

Thanks for watching ✌️
It's loosely based on one of those big cats. But it is more or less a generic design. Supposed to be a big 1/14 scale digger.

[@klauslengemann1763]

Hello , could you please let me know what scale is the excavator.
Kind regards.

[@YetAnotherRcChannel]

It is supposed to be a large 1:14 scale digger.

[@TheStig_V2]

tøft 👍

[@YetAnotherRcChannel]

Takker 🙂

[@satnamtractormodel6813]

Hello ji please Sir tractor file bhejo

[@YetAnotherRcChannel]

The Tractor is my first "big" design. And it is really not buildable.
Way too much customizing to do to make everything work. And it doesn't work too good.
A revision is on my list. So keep checking in.