MST INTAKE On An Audi A5 B8.5! | DIY |

แชร์
ฝัง
  • เผยแพร่เมื่อ 1 ธ.ค. 2024

ความคิดเห็น • 70

  • @2000vxss
    @2000vxss 8 หลายเดือนก่อน

    Just came across your videos boys, awesome stuff.

  • @markperera1877
    @markperera1877 หลายเดือนก่อน

    Great content on the A5 mods guys. Is there no K&N equivalent for the b8.5?

  • @ap5196
    @ap5196 3 ปีที่แล้ว

    Thanks for the video.. I have my turbo muffler delete and GFB sitting in my living room. I'll definitely be using the video to do my install. Big thanks from San Diego, Ca.

    • @Budget_Builds
      @Budget_Builds  3 ปีที่แล้ว

      Hi Andy P,
      Thanks for your comments ☺️
      Great to hear that you have these mods planned for your car 🙌🏽🙌🏽
      Let us know when you do these mods and tag us on our Instagram @adbudgetbuilds.

    • @ap5196
      @ap5196 3 ปีที่แล้ว

      @@Budget_Builds did you guys make a review of how the mods affected your throttle response or hp? Any thoughts on if there were any advantages to the parts added other than noise for the muffler delete ? I heard the fastbits helps boost regain faster.

    • @Budget_Builds
      @Budget_Builds  3 ปีที่แล้ว +2

      Hi Andy,
      We will be making a review of the Modifications in an upcoming A5 video!

    • @S433D786
      @S433D786 ปีที่แล้ว

      Did you get the stutututu noise?

  • @antoniobonebeatz
    @antoniobonebeatz 3 ปีที่แล้ว +3

    The diverter valve is a pain to take off scratched my hands up weeks ago doing the same job. I removed the top screw from the top and the other 2 from bottom it sucks changing it

    • @Budget_Builds
      @Budget_Builds  3 ปีที่แล้ว

      Hi Antonio,
      I agree! It was such a pain, but was definitely worth the struggle.

    • @blizteredthumbs7911
      @blizteredthumbs7911 3 ปีที่แล้ว +1

      1/4 inch ratchet mate, large and small extension.. Allen attachment. Fiddly but no pain or injuries should happen.

    • @S433D786
      @S433D786 ปีที่แล้ว

      Do you have the stutututu noise?

  • @simon057
    @simon057 3 ปีที่แล้ว +1

    Great video looking forward to do the same on my a5 soon when the temperatures rise

    • @simon057
      @simon057 3 ปีที่แล้ว +1

      Do you think the turbo muffler delete alone is worth it? Or does the intake make Most of the noises

    • @Budget_Builds
      @Budget_Builds  3 ปีที่แล้ว

      @@simon057 Hi BobiG, Thanks for your comments. The intake does most of the noise but definitely worth doing the Turbo Muffler Delete if you’re planning to change your intake.
      Hope This Helps 😊

  • @NIKARTIST89
    @NIKARTIST89 3 หลายเดือนก่อน

    3 yers after you did this job. How is it? Does your turbo alive after dv valve?

  • @tonio620
    @tonio620 หลายเดือนก่อน

    Is that license plate cover part removeable?

  • @PANN1Cau
    @PANN1Cau 3 ปีที่แล้ว +2

    Whoa someone else playing around with the CNCD engine is a rare sight. Please tell me yours is the 165kw/220bhp version?

    • @Budget_Builds
      @Budget_Builds  3 ปีที่แล้ว

      Hi PANN1Cau,
      The A5 is the CNCE Engine, 169kw/230bhp.

    • @PANN1Cau
      @PANN1Cau 3 ปีที่แล้ว

      @@Budget_Builds huh didn’t know there was a change between the A4 and A5. I’ve got the lowly 165kw version and have been playing with it for a few years. Good to see a TH-camr making some vids because these cars are pretty rare all things considered.

    • @EnkiEdit
      @EnkiEdit 3 ปีที่แล้ว

      @@PANN1Cau I drive the A5 225hp quattro in Vienna :)
      @audi.a5_black or @va_captures for questions!

    • @Budget_Builds
      @Budget_Builds  3 ปีที่แล้ว

      @@PANN1Cau Thank you 😊, hopefully you’ll see more work being to the car very soon!

    • @HaydenHarrison412
      @HaydenHarrison412 3 ปีที่แล้ว

      I have this CNCE engine in my 2016 Q5. I’m glad I came across this channel because trying to buy parts out of the US is difficult because they do not know this engine. If you simply say 2016 Q5 2.0T you’re bound to get a wrong part.

  • @stevesmith264
    @stevesmith264 3 ปีที่แล้ว +1

    Nice job 👏 keep up

  • @muzza19971
    @muzza19971 2 ปีที่แล้ว +1

    Will this fit the 2.0 tdi?

  • @Alleng200
    @Alleng200 2 ปีที่แล้ว +1

    Hi, thanks for the video, very helpful, I have the same car and same gen3 engine, there seems to be many different variations of this part on Amazon or eBay, are you able to share the link for your part?

    • @Budget_Builds
      @Budget_Builds  2 ปีที่แล้ว +1

      What part are you referring to?

    • @Alleng200
      @Alleng200 2 ปีที่แล้ว

      The Turbo muffler delete replacement part

    • @Budget_Builds
      @Budget_Builds  2 ปีที่แล้ว

      I would recommend checking out the Awesome GTI website and get the APR turbo muffler delete.
      I’m afraid the link to my part has expired and been removed from the listings.
      Hope this helps.

  • @AbdulKalam-fv9lg
    @AbdulKalam-fv9lg ปีที่แล้ว

    Hi mate. Would you be able to tell me the part number of the turbo actuator,
    Unrelated to the video but it would help me out a lot if you could tell me!

  • @Olav529
    @Olav529 ปีที่แล้ว +2

    Btw… it is called «Turbo Flutter»👍😂

  • @AbdulKalam-fv9lg
    @AbdulKalam-fv9lg 3 ปีที่แล้ว

    Hi in the video you didn’t reconnect the vacuum hose to the inlet hose. Is it not required

    • @Budget_Builds
      @Budget_Builds  3 ปีที่แล้ว +1

      Hi Abdul, I reconnected the hose back on.

  • @markperera1877
    @markperera1877 หลายเดือนก่อน

    Is yours with or without the MAF sensor ?

  • @AbdulKalam-fv9lg
    @AbdulKalam-fv9lg 2 ปีที่แล้ว

    Hi I’ve bought the same induction kit for my car. I was wondering if the heat shield is also quite loose for you too?

    • @Budget_Builds
      @Budget_Builds  2 ปีที่แล้ว

      Hi Abdul, yes unfortunately it was. I wanted to bolt it in some how but Abi wasn’t keen on getting the drill out lol 😂

    • @S433D786
      @S433D786 ปีที่แล้ว

      I have the same car and induction kit and have the same issue haha, looking to get an IE induction kit

    • @markperera1877
      @markperera1877 หลายเดือนก่อน

      Great channel chaps! keep it up 👍

    • @markperera1877
      @markperera1877 หลายเดือนก่อน

      Is there no K&N equivalent to MST?

  • @NIKARTIST89
    @NIKARTIST89 3 หลายเดือนก่อน

    Did he said Чуть, чуть noises?

  • @lukecooper2146
    @lukecooper2146 3 ปีที่แล้ว

    Have you noticed any power loss ? I have a A5 b8 with the same induction kit and it sounds great but feels slower

    • @neilwilson5343
      @neilwilson5343 3 ปีที่แล้ว +2

      CAI are a complete waste of money in my opinion. Of all the cars I've owned with CAI I've never noticed any difference whatsoever.

    • @Budget_Builds
      @Budget_Builds  3 ปีที่แล้ว

      Hi Luke,
      Yes I did notice a power loss\ Lag.
      I’m contemplating to change back to my stock air box with a KN Filter instead (which I had installed before).
      Hope this helps!

    • @Budget_Builds
      @Budget_Builds  3 ปีที่แล้ว

      Hi Neil!
      I totally agree, but some CAI with a cover that prevent the heat being sucked in, like the APR one is actually quiet noticeable in throttle response.

    • @HaydenHarrison412
      @HaydenHarrison412 3 ปีที่แล้ว +2

      @@Budget_Builds what’s the PN for the K&N filter for this engine?

    • @Budget_Builds
      @Budget_Builds  3 ปีที่แล้ว +1

      @@HaydenHarrison412 Hi Hayden,
      The part number is :33-2945
      Here’s the link on Amazon:
      K&N Engine Air Filter: High Performance, Premium, Washable, Panel Filter: 2007-2017 (A5 Quattro, Q5, A4, A5), 33-2945 www.amazon.co.uk/dp/B001NAP0K6/ref=cm_sw_r_cp_api_glt_fabc_E2MR9PN4FB19C8TX1ZE5

  • @tilkappel178
    @tilkappel178 3 ปีที่แล้ว

    Nice Video! Is it legal in the EU to drive with the kit?

    • @Budget_Builds
      @Budget_Builds  3 ปีที่แล้ว +1

      Hi Til,
      I’m not sure if it is legal, but you can check if it is Tüv approved (in Germany’s case).
      Hope this helps!

  • @xJashonx
    @xJashonx 3 ปีที่แล้ว +1

    Link to grill?

    • @Budget_Builds
      @Budget_Builds  3 ปีที่แล้ว

      Hi Jashon,
      The link to the grill can be found in Quattro Grill video.
      Hope this helps!

  • @thelifeofbenji4700
    @thelifeofbenji4700 2 ปีที่แล้ว

    What Year Is The Audi a5

  • @carllandeau7543
    @carllandeau7543 3 ปีที่แล้ว +1

    Going to run slightly rich. Blow off valve spacer is not recommend unless it's tuned.

  • @stevesmith264
    @stevesmith264 3 ปีที่แล้ว

    That's an old tin on the socket. Who gave u that 🤔

  • @bibbo12345
    @bibbo12345 3 ปีที่แล้ว

    What makes the stu stu noise? The DV+?

    • @Budget_Builds
      @Budget_Builds  3 ปีที่แล้ว

      Hi Matthew,
      Yes, the DV+ makes the noise

    • @music88433
      @music88433 3 ปีที่แล้ว

      @@Budget_Builds i put the dv+ i also have intake not even a slighlty stu stu noise...

    • @S433D786
      @S433D786 ปีที่แล้ว

      @@music88433 did you manage to get the stutututu noise?

  • @Youtoo345
    @Youtoo345 3 ปีที่แล้ว

    What year is this car

    • @Budget_Builds
      @Budget_Builds  3 ปีที่แล้ว

      Hi TDM Gaming,
      The Audi is a 2015 model!
      Hope this helps!

  • @blizteredthumbs7911
    @blizteredthumbs7911 3 ปีที่แล้ว +1

    Lads, ffs, i have a dump valve /diverter valve .. same one.. when rebuilding the dv blow off it too clicks into place, there is a guide to allow it home / alignment.. with all your fucking about you clearly missed it. Others will watch this and fuck something up..

  • @saga420nbk
    @saga420nbk ปีที่แล้ว

    That looked like a fake one..I could be wrong because it came in the correct box