Jet Pump UPGRADE Kit Installation | Kawasaki 12F, 15F, SXR 1500, STX 160
ฝัง
- เผยแพร่เมื่อ 19 ธ.ค. 2022
- Prevent dreaded engine failure by installing the KP Pump Upgrade Kit! Fits all 148mm pumps. 12F, 15F, SXR 1500, STX 160.
Follow the link below for the kit:
www.kawiperformance.com/jet-p... - ยานยนต์และพาหนะ
Have replaced many failed pumps , engines dues to this , good video my brother
Hoe many hours does a failure happen?
Great stuff. You guys should be getting some shout outs on publications like watercraft journal. You bringing good stuff to the Kawi market along with Kspeed. Great to see that Riva isn’t the only performance shop.
Perfect job Steve
ممتاز جدأ و اكثر من رائع 👏
Betty then seadoo inside jet pump.
Does this apply to the 2023 Ultra 310LX?
❤
Where can I buy .
So am i sol if i dont have a press?
what if you just put the bearings in the freezer and drop them in?
You can do that as well, but a press is recommended
Goood me gusta
What pump is in a 95 Kawasaki 750 sxi will this part work for this ski👍👍👍 great video
That pump is different, this kit will unfortunately not fit. Thank you!!
Im not going for more speed, Im looking to increase my fuel economy. Do you have any pro tips or upgrades to n increasing your ride range.
That's a tough one, obviously stay off the throttle as much as possible and keep RPM lower. A higher pitch prop say 15/22 will help keep RPM lower at a slightly higher speed, which may help. It will decrease top speed however. Not sure how much extra range until tested
Do you guys partner with any dealers? Would they install this kit or do I do it myself?
Yes, we do have dealers across the country that can install our kits.
is my 2016 15F two bearing or one ?
Two bearing
Jeet Pump Bangladesh country
I've tried messaging you guys on Instagram a couple time, what year models need this mod in particular. My dealership said mine doesnt need that because it was redesigned on mine. 2021 kawi ultra.
Kawasaki has not updated their design to date, this will still be needed on the 2021+ to prevent engine issues
@@kawiperformance 🙏🙏
@kawiperformance what if my ski is still under warranty. I wouldn't want to do anything that void it. Your thoughts? It's a 2020 stx160 lx. I just bought it and added a 3-year warranty. Maybe do it the moment it runs out? When I do do it, would my engine take a one or two bearing setup? Thanks much for any advice!
@@chillichuck1 2 bearing set up.
ممتاز جدأ و اكثر من رائع 👏