BMW. Adding FSC code into EPS for Servotronic S216A

แชร์
ฝัง
  • เผยแพร่เมื่อ 5 ก.พ. 2025
  • AppID 131(0x83)
    UpgradeIndex 1(0x01)
    SWTType SWTclassic light
    FSCStatus accepted
    ALI PC 1 572 188 463 2020 06 15 14 01

ความคิดเห็น • 25

  • @BimmerRetrofitGeorgia
    @BimmerRetrofitGeorgia 11 หลายเดือนก่อน +1

    am i only one who recognized that vin from car and eps are different?

    • @andreisafonov8144
      @andreisafonov8144  11 หลายเดือนก่อน

      you are right. EPS checks vin inside FSC and vin of the car. it is not checking the vin written in the EPS itself

  • @boufadi2493
    @boufadi2493 11 หลายเดือนก่อน

    hello, I have a BMW F20 XDRIVE with ACC. and I changed the rack. I coded the VIN but I still have the ESP code, and the FSCs are rejected. Do you have a solution?
    i want to buy FSC
    THANKS

  • @mrpigzzoid
    @mrpigzzoid 9 หลายเดือนก่อน

    Hello,
    I have a BMW F20 prod. date 11/06/2012 (dd/mm/yyyy) with servotronic eps, recently bought a servotronic eps produced in 06/12/12012.
    Can i replace the old eps with this "new"?
    Is it possible to inject the fsc from mine eps into the “new” or do we have limitations regarding the production date of the new eps?
    Best regards.

    • @andreisafonov8144
      @andreisafonov8144  9 หลายเดือนก่อน

      Yes. You can inject your own original "repair" fsc, it will replace old one in older eps.
      I can get the repair fsc for you by vin and help with injecting remotely. (cable Enet needed)

    • @mrpigzzoid
      @mrpigzzoid 9 หลายเดือนก่อน

      I’ ve read in multiple forums that we only can do that if the donor eps is older than the one installed in car. Have you done already the opposite and the servotronic in the end works properly?

    • @andreisafonov8144
      @andreisafonov8144  9 หลายเดือนก่อน

      @@mrpigzzoid that is rigth - it is only possible if installed EPS (donor) older then original FSC date. in case when donor EPS had servotronic fsc code in it.

    • @mrpigzzoid
      @mrpigzzoid 9 หลายเดือนก่อน

      Thank you for your help.
      By the chance, do you know if changing the motor from mine eps to the donor we could make it work? Or we also need to move the torque sensor?

    • @andreisafonov8144
      @andreisafonov8144  9 หลายเดือนก่อน

      @@mrpigzzoid it is always better to install full used EPS all-in-one, not changing or dismounting something like motor etc. it could be painful often

  • @artanosmani6707
    @artanosmani6707 11 หลายเดือนก่อน

    Hi, how can get the FSC code for F36 serries, for EVO map?

    • @andreisafonov8144
      @andreisafonov8144  11 หลายเดือนก่อน

      yes. easy. 2024-1 map available already

  • @igorstolper9127
    @igorstolper9127 ปีที่แล้ว

    Is anybody know if ESP on F25 can be programed to increase power assistance at high speed (70mph and up)

  • @jzwjk
    @jzwjk 3 ปีที่แล้ว

    My E93's EPS change with a 2nd hand used EPS ZBnumber 6855892, is it can work with your e-sys?

    • @andreisafonov8144
      @andreisafonov8144  3 ปีที่แล้ว

      No, E-Sys is engineering software for F- and G- series.

  • @jzwjk
    @jzwjk 3 ปีที่แล้ว

    how to coding with E93

  • @jeanro.8644
    @jeanro.8644 3 ปีที่แล้ว

    hello. have you used a used EPS, no VIN match?

    • @andreisafonov8144
      @andreisafonov8144  3 ปีที่แล้ว

      It was used EPS. Properly programmed , encoded and activated after installation

    • @jeanro.8644
      @jeanro.8644 3 ปีที่แล้ว

      @@andreisafonov8144
      Ok.thanks. I'm working on a solution for fsc... I hope to have it soon. thanks for answering

  • @jzwjk
    @jzwjk 3 ปีที่แล้ว +1

    used eps is turning too heavy

    • @andreisafonov8144
      @andreisafonov8144  11 หลายเดือนก่อน

      yes, when it rejects (or doesn't have) FSC for servotronic

  • @benjaminmlinaric
    @benjaminmlinaric 4 ปีที่แล้ว

    where did you get it fsc code?

    • @andreisafonov8144
      @andreisafonov8144  4 ปีที่แล้ว

      It is possible to buy it from my friend.
      If it was in stock car - from 30eur (repair code),
      if it wasn't in stock - from 400eur.

    • @NtiyisoRikhotso
      @NtiyisoRikhotso 2 หลายเดือนก่อน

      @@andreisafonov8144 can I get FSC codes for remote engine start? BMW G15 M850i