Part 5: Adding Hydraulic Remotes

[@chrisrafuse8315]

Excellent video and explanation of the installation process. I have a Ford 800 and considering adding the same Steiner single spool valve kit. The even though the T-handle gives you the ability to run double acting cylinders, shouldn't there be a hose for low pressure/return to the tank?

[@jeffreyticen689]

When you use dual action cylinders one hose has pressure to the cylinder and the other returns to the tractor. A single action cylinder has one hose at one end and a air vent at the other end to release the pressure as the cylinder moves in and out. Hope that answers your question.

[@coronaramosdavid3049]

So I have to place the T-shaped handle in the middle to use a double-acting cylinder?

[@jeffreyticen689]

It screws in to act as single action. Screw it out to use double action.

[@szilifulop7391]

I have a Fordson Dexta, would it fit or I need something else??

[@jeffreyticen689]

You need to look at the Steiner website for the hydraulic plate. It tells you all the tractors it works on. There are quite a lot, so hopefully it will.

[@pharris1015]

I have a 800 and it has a single action. What attachments is for a single action?

[@jeffreyticen689]

Usually the cylinder uses pressure to lift the implement but gravity lowers it down.

[@pharris1015]

@@jeffreyticen689 that's what I was thinking also. Thank you

[@regivylibre6690]

What causes hard startin

[@donttreadonme4355]

What do ya mean?

[@billypirtle1443]

That's what I do not like on after market vales I paid a little more for factory for my Ford 5000 and now I have two hydraulic outlets on the back I use one for my hydraulic 3rd arm for my finishing mover the other for my disk and bush hog.

[@TripleTRanchAndSawmill]

Thanks for video

[@jeffreyticen689]

Thanks

[@josealv1970]

Good job

[@jeffreyticen689]

Thanks