Problem Solving - Wagner Control Pro HEA Setup and Prime Tips

Very useful video showing some basic quick checks to get your machine working when it will not prime

[@m25localsprojects21]

I'm retired builder, my Wagner sprayer was sitting in the garage for few years, today i tried but won't suck the paint. I thought i knew all. The last upside down water trick is amazing. Excellent tip thank you 🙏

[@s1mon1231]

The last water trick worked for me as well, so this was really helpful

[@xxdemonshitxx]

Holy crap...this actually worked! I was about to take the whole damned pump apart! This video should be the first you see when you search "Wagner Control Pro 190 not priming"!

[@vince1103]

Just tried the water thing and the unit now works a treat. Cracking tip thank you.

[@kav1187]

Thanks for this. The water trick sorted it in the end. The last time I used it, it had issues maintaining the pressure. I took everything off and cleaned it all intricately. When I used it today it wouldn't prime. Tried everything in this vid and eventually got it running. Many thanks 👍

[@themr2x]

This worked great on my 350m

[@robertszekely7293]

This worked for me! Thank you for the tip! Saved my bacon! Cheers!

[@BenjaminOYeh]

Thank you for saving my day!!

[@DZNYFAN]

Went to use my Control Pro 170. Couldn't get it to prime. Cleaned everything and couldn't get it to work. The turn it upside down and replace everything in that position. That, along with the water prime fixed it. Thank you.

[@cesar5957]

Very Nice tip thanks !👍

[@knusperkeks4225]

Thank you

[@robindeschamps4984]

Thank you so much ❤

[@johnthemod71]

Put some piston lube in the intake valve let it sit for 10 minutes and your pump will run all day long without any issues

[@RobB-vz2vo]

With my 250M, the water in the inlet fixed my issue with not priming.

[@englemark]

My wagner airless r250 were leaking right from the motor. What seems to be the problem?

[@alexayounginsong2641]

While pouring water in the hole, some of it flow through the plastic case which showed water came out after repositon the sprayer. Would that be ok?

[@deejunior8014]

What if that won't work ? My one is spit and out paint and why does it do that?

[@wahwahgaboor]

Great!!!!!! When in doubt use a hammer 😅