I Built the World's NICEST Shed! (Modern Shed Build Time Lapse)
ฝัง
- เผยแพร่เมื่อ 22 ต.ค. 2022
- Get my FREE Shed Framing Plans ⬇️
atimprovements.com/modern-she...
Last Summer, I Built (in my opinion) the World's NICEST Shed! This video is a Modern Shed Build Time Lapse of the entire shed construction process from start to finish. Everything from framing, siding, roofing, and everything in between is covered in this DIY Shed building time lapse. Building a Shed is a project that almost anyone can tackle with a little bit of knowledge and hard work. This video, along with my Free Modern Shed Building Ebook, will show you everything you need to know to build your own Modern Shed!
For more detailed instructions of every step shown in this Modern Shed Build Time Lapse Video, Check out my other videos in the"Modern Shed Build TH-cam Series" (Videos are linked further down in the description)
🛠 🧰 TOOLS AND MATERIALS USED TO BUILD THIS SHED
TOOLS:
Air Compressor: amzn.to/34TatJf
Framing Nailer: amzn.to/3JGpBYU
Roofing Nailer: amzn.to/3BEAuYF
Roofing Mastic: amzn.to/3ePgBqK
Orbital Sander: amzn.to/34UwlUD
Bar Clamps: amzn.to/3JjFrJe
Carbide Tipped Drill Bit: amzn.to/3S0hdIM
Tapcon Screws: amzn.to/3OxEWxh
Drill: amzn.to/3JICKkk
Tape Measure: amzn.to/3HaTWgE
Circular Saw: amzn.to/3BFotC4
Masonry Drill: amzn.to/36yP1JW
Level: amzn.to/3HowUDn
Hammer: amzn.to/35fIpiT
Chalk Line: amzn.to/3MwSDg8
Clamps: amzn.to/3HLqwpK
Drill: amzn.to/3JICKkk
Sawzall: amzn.to/3HcdeSI
Circular Saw: amzn.to/3BFotC4
Jig saw: amzn.to/3I6lcyd
MATERIALS:
Shed Windows: amzn.to/3MUmgIF
Side Lights: amzn.to/3EY9fvP
Decorative Front Lights: amzn.to/3SoQ6X1
Overhead LED Bay Light: amzn.to/3ShAWmp
Acrylic Window Panels: amzn.to/3W0Iayj
Roll Up Door - See Roll Up Door TH-cam Video Below
🎥 Below are the other detailed videos in my Modern Shed Build Series:
Introduction to the Modern Shed Series: • I Transformed my Shed ...
Shed Foundation Options: • Shed Foundation Option...
How to Build and Frame a Shed Floor: • How to Build a Shed Fl...
How to Frame Shed Walls: • How to Frame Shed Wall...
How to Frame a Shed Roof: • DIY Shed Roof Framing ...
How to Install Shed Siding: • How to Install Shed Si...
How to Install Shed Sheathing: • Shed Sheathing Install...
How to install Shed Trim: • How to Install Shed Tr...
Inexpensive Shed Window Option (Acrylic): • Inexpensive Shed Windo...
How to Install a Shed Window: • How to Install a Shed ...
How to Install Shed Siding Veneer: • LVP Flooring as Shed S...
How to Install a Roll-Up Door: • How to Install a Roll ...
How to Build a Shed Ramp: • How to Build a Simple ...
How to install asphalt shingles on a shed roof: • How to Install Asphalt...
How to Add Electricity to a Shed: • Shed Electrical Instal...
How to Organize Your Shed Storage: • Shed and Garage Storag...
How to Apply Epoxy to a Shed's Subfloor: • Epoxy Floor Coating Ov...
If you want to learn how to build the EXACT shed shown in the video, I put together "The Modern Shed Build Course" (bit.ly/3PeKr4V) which includes a materials list🧱, tools list 🛠, and cut list 🪚for each step of the entire shed build process. Basically, this course makes it feel like you built this shed alongside me! Every purchase helps support the channel!
Follow me on Instagram: / atimprovements
I post a ton of DIY Reels and other Home Improvement Content Daily!
Subscribe to my TH-cam Channel ⬇️ th-cam.com/users/AndrewThron...
Check out my Website for additional DIY Content: atimprovements.com
▬▬▬▬▬▬▬▬▬▬▬▬▬
🎥 MY TH-cam GEAR
Camera (Iphone Max): amzn.to/3d5HxSo
Microphone 1(Maono Condenser Mic): amzn.to/3RCAb7N
Microphone 2 (Snyco G2 Lavalier): amzn.to/3Td3y1m
Tripod: amzn.to/3Rz5Gj3
Mini Tripod: amzn.to/3Rvt2WM
Lighting: amzn.to/3d4QdZ5
▬▬▬▬▬▬▬▬▬▬▬▬▬
Be sure to subscribe and hit the notification bell so you don't miss any Future Videos!
Thank you so much for watching!
*All content on the Andrew Thron Improvements TH-cam channel reflects my own opinions. Please seek out guidance of professionally trained and licensed individuals before making any decisions. Links in the description may be affiliate links.
Kudos to him getting it done in under 10 minutes
Longest 10 minutes of my life lol
And all by himself ( "I" .. )
Great build but by lifting subfloor off the concrete base a couple of inches would allow for airflow underneath shed so it can always dry out fully after each rain fall. Would last hell of alot longer.
How would you do this? Like using spacers to elevate the framing off the concrete pad? Or using spacers between the subfloor and the floor framing?
@@jamalgibson8139
Hi i use x 50mm x 50mm low profile bearers Made from 100% recycled plastic or treated timber would work fine. Just place bearers opposite direction to your subfloor timbers so that you subfloor sits on the new bearers. You could still fit a skirt around the base to hide the 50mm gap but as long as you fit air vents at each end for decent airflow
@@Michael-twin Thanks so much! I'm looking to do a similar build in the future, so any tips are really appreciated.
It looks like his floor joists are pressure treated 4 x 4s laid directly on the slab. They won't rot, but I suppose the plywood subfloor might eventually without airflow. I doubt he'll have a problem.
He could have saved a lot on the lumber: 2 x floor joists, single top plate ( with rafters stacking), and by eliminating a few unnecessary studs.
But all in all, an impressive build, well done.
It occurred to me that he could have cantilevered a foot or more on all four sides and gotten more square footage out of that slab.
But it's a well done job, and he sure didn't cheap out or cut corners.
Well said but i also would add some insulation like bitumen or roofing felt so there would be no direct contact between concrete and wood.
Quality build. You gotta be proud of that. Not just this, but everything you did before this to give you the skill level to do this. 👍🏻
Cool! very impressive. The craftsmanship and attention to detail are remarkable, making it the nicest shed I've ever seen.
Love the shed ! So great to see someone who is knowledgable of such precise construction skills, and uses them correctly!!! End results ,you have an excellent, very well made building,that will last for many years to come!! Looks very stylish too.
World’s second nicest shed
The proper tools is everything. Having that makes the project that much easier. This I learned from my Father and Grandpa! The shed is beautiful. What's not to like here. 🤘🏻
Totally agree! Thanks for watching!
Tools make the man!
Looks awesome, man! I have a nice shed also. I added radiant barrier foam insulation followed by blown in cellulose. Then, I installed a tiny window A/C that is on a humidistat to keep my tools and equipment from rusting or rotting. It works awesomely. It keeps the shed from getting to sweltering temperatures also.
Very smart. Good shit
Andrew! OMG that's a gorgeous shed bro! Love the detail work you did to make it extra special inside! Great video and editing also. Thanks for the awesome content.
I appreciate it!! Thanks so much for watching and for the support!
No insulation. I know it's only a shed but a shed that looks that good would have me hanging out inside of it quite a few times
Great build. And utilizing the previous cement pad was a great starting point for your design.
Love the color palette on this modern shed, it is very balanced and inviting. Good work
I appreciate it!
Excellent overall build! I would've added some ventilation to the roof & flooring areas though. Moisture will get stuck in those areas
And a moisture barrier would have been required @ 0:24, so unfortunately it will rot
Youre right but he don't take honest criticism. Also why build such a nice building if it's just a 9x9. Also it's more wise to probably elevate the wood fom the ground to prevent termites.
Add a fan in ceiling.
Woods so expensive where I live brick would've been cheaper
I did something very similar, but I used the old metal shed to roof the new one. It worked and looks great
That would have been smart!
Que belo trabalho! Muito caprichoso! Dá gosto de ver! Parabéns!!!
That is so cool to watch. Thanks for posting. Great shed.
Nice build, however you should protect the floor wood against moister, use DPC or other foil. Also protect it from heavy rain in the garden and use gutters.
DPC???
@@juanm2188 kind of gridded/ratered thick foil.
How nice! And all the information under the title for what you used! Thanks! Nice work!
Floor turned out great!
Love the inside walls!
First time viewing your channel, definitely looking to see what else you've done!
No insulation
I appreciate it!!!
Great build! Cheers
Appreciate it, Jeff! No hammock, but maybe on the next one 👍
Love seeing the chalk line used. Reminds me of my late father every time and it brings a smile to my face to have something make me think of him.
Yeah who freaking care is dude
Chaulk lines are used every day in construction..it's not a rarity
@jurlinquist Thank you but to anybody who thinks this is a tremendous build. Doesn't know shit about construction anyhow... There are more than several major send. This guy made that's just gonna cause him problems in the future
@@batboy020876cool
What an awesome build. Thanks for sharing your expertise with us.
Appreciate it! Thanks so much for watching, Pamela!
I dig your build. I was surprised to see that you didn’t use any insulation in the walls or ceiling, but just being a shed I can see it’s not really needed.
No Insulation, No Heater, too!
Doesn't appear to be a place one would spend much time in! Just a place to get things from, and move on! So, like, not a "Shop", just a Storage Place, to keep things out of the House or Garage, it seems!
Insulating the walls would have made for an easy transition to a workshop or artist’s studio-just add a window AC unit if in a warm climate. Insulating would have been only a small expense and easy to do before cladding the interior walls.
@@DriverDude100 yes, essential for a practical shed
This shed is INCREDIBLY extra. And I'm here for it! lol Love the idea of lining the inside with French cleat boards. Genius.
You have done a magnificent job, sir. Congratulations. Bravo. Well done!!
Awesome job. I've built so many garages and you went over and beyond. I wouldnt change a thing. Gorgeous shed dude.
I appreciate it!
Oh gosh, this is a whole other level of inspiration. Your attention to detail and all the fancy finishing bits make this all come together so well. AWESOME.
I appreciate it! Thank you so much for watching and for the support!
Jesus Christ is lord.
Understanding the truth of the Bible requires personal efforts made in faith. Please, if you haven’t already, read at least three books of the Bible to truly understand what’s at stake. Not everyone knows as much as they think they learned as a child. Three books at the very least is an important milestone to reach. Genesis, Mathew, and one of your personal choice.
Please, it is important. Reading isn’t enough. You must do the inner healing Jesus Christ taught. To be forgiven we must forgive. Start there, at home, the heart, try to work through some problems inside. Your parents probably loved you. Figure that out. It’s important.
Seriously pray to Jesus Christ and break down your walls, ask for forgiveness.
Jesus Christ is the way truth and life,
It's such a nice shed I would have insulated it and had double glazing to double as a workshop and be able to work there in the wintertime.
That would have been an improvement - thanks for watching!
I need a small studio/office so I’m not cluttered at home and this seems the perfect solution. Thx for sharing!
Great inspirational video 😍
From all the crazy weather, my shed has taken a beating!! So your project is a game changer for my DIY shed, thanks for sharing.
I appreciate it, Wendy! Thanks for watching!
This is amazing! Well done! 👏🏼 Can’t wait to check out the shed course!! You really put a ton of work into this and it shows!
Thanks Mel! Appreciate your help with some it!
It’s a really nice looking shed. I am curious about the decision for little water proofing and no gutters? Not a lot of rainfall in your area maybe?
That was such an amazing build and straight to the point. I love it.
💫😸 thanks for sharing this "tore-up-from-the-floor-up" step by step build! I especially love your lighting choices 👍
Thanks for watching!
1) Nicer than some people’s homes.
2) Knows what they’re doing.
3) Super nice design - clean and practical.
4) Decorative lights were a nice touch.
I really like your shed. Great job. I have been planning one really similar but as a home office for my wife. Instead of roll up door I want a French door and all glass. Wood stove and a/c
That sounds sweet! Good luck with your project!
That was amazing! I stumbled across your video and really enjoyed it. That is absolutely the nicest shed ive ever seen, and i saw it being built! Thanks
Fantastic. Looks very nice and all your work paid off.
When doing epoxy floors, premix your metallics into one part of the two-part kit, then strain it through a very fine screen to remove clumps. That is if you want to reduce "tadpoles" or "meteors", which can be seen in this floor. In this particular application there may be streaks and/or "fisheyes" (separation in the product caused by debris breaking surface tension) which would be almost impossible to negate as it's an outdoor project. Overall, it's a solid floor and a great shed.
I love the modern design ❤️ Great job!!
Thanks Jennette!
Morning! Not to be a pooper, just my two cents, but I thought the exact opposite. Funny, people are, aren't we? Yin and Yang. Great job on the project though, no doubt.
@@AndrewThronImprovements The shed I build is a nicer‼️😡
@@hazeentertainmenthiphop I believe it! I would love to check it out if you have a TH-cam or an IG
@@hazeentertainmenthiphop Prove it. The channel owner might be nice but I want to see it. I don't care if I'm proved wrong, but prove it. All you do is make instrumentals.
Thank you! Very nice build. I may try this with my father this summer.
What a gorgeous shed. I would move in! Great work and video.
Awesome build! What was the total cost and time to build?
Great question! So many of these DIY videos look amazing, but don't discuss my most important consideration: cost.
Cost breakdown is here!
th-cam.com/video/qUXTZ3ZA4Vw/w-d-xo.html
Cool man. I built a similar shanty last Fall using 70 % recycled materials out of Victorian demo. To make life harder I made the 3 ft front soffit curve, and roofed it with metal.
Jesus Christ is lord.
Understanding the truth of the Bible requires personal efforts made in faith. Please, if you haven’t already, read at least three books of the Bible to truly understand what’s at stake. Not everyone knows as much as they think they learned as a child. Three books at the very least is an important milestone to reach. Genesis, Mathew, and one of your personal choice.
Please, it is important. Reading isn’t enough. You must do the inner healing Jesus Christ taught. To be forgiven we must forgive. Start there, at home, the heart, try to work through some problems inside. Your parents probably loved you. Figure that out. It’s important.
Seriously pray to Jesus Christ and break down your walls, ask for forgiveness.
Jesus Christ is the way truth and life,
How did you calculate that percentage? I am using salvaged for a build and I am trying to figure out how to calculate myself
Most definitely the nicest shed I've ever seen built😊 My hubby built one last year nothing like this but still useful and sturdy for tools. If it was this nice most def she shed periodt🥰
Haha appreciate it!
Awesome design nice teamwork🎉 thanks for showing😊
Awesome! Just a potential tip: It is usually easier to sheath the walls prior to standing them up. It’s probably worth noting I don’t know where you live or what the codes are. It’s also worth noting that I have 10+ years experience building custom sheds and log buildings.
That’s a good tip! Definitely will consider sheathing before lifting on the next one ☝️
Was the wood floor over the slab needed for the epoxy? I would've been inclined to cover the concrete with a sheet of plastic to stop the rising moisture from rotting out the treated lumber and perhaps stop the rising radon as well since maybe the epoxy may be a barrier but the sill plate is still permeable.
That's what I asked myself why not epoxy the slab instead of making a floor
Epoxy was an afterthought I believe
Normally epoxy shouldn’t go over wood floors like that since epoxy drys so hard and the wood underneath can flex causing your epoxy to crack. Hopefully it doesn’t though! 💪🏼
That is awesome work,the quality is top notch.
I'm a big fan of slatwall for residential use. Well done, sir
That is so awesome. Super well done. Not a shed, a tiny house
Thanks Caleb! Appreciate it!
Great build. Beautiful shed. Well done. I love the apoxy floors. What about insulation? I insulated my shed with 3M panels before putting up the inner walls but mine is a workshed not a storage unit.
Thanks! I definitely should have insulated. That was an oversight
@@AndrewThronImprovements we live we learn. That's part of life!
That’s built better than my home. I’m so overwhelmingly impressed. Thank you for sharing. Thank you for doing it right and not cutting corners. Very commendable.
I appreciate it!
Wow, awesome build!! It looks like it could be a Tiny House!! 🥰
Can't believe you built a shed in only 9 minutes. You move very quickly.
Very solid! Amazingly done! Have you ever tried building your own home? I wonder what the design would look like?
I appreciate it! And no but I want to soon!
Beautiful! A lot of measuring!
You are very inspirational, I'm enjoying your content....thanks a lot!!!
LOVE THE DESIGN & FINISHING TOUCHES!! Because of the quick time lapse, maybe I missed it, but what are the final dimensions of the shed and how high is the ceiling at its highest point? I really like how you made the most of a small footprint and the final look is super sharp! What was your estimated total material cost? ~~Christy~~
Thanks! Shed is 10'x10' and I think the total height it close to 11.5'. I can measure if you need the exact height.
Cost breakdown is here!
th-cam.com/video/qUXTZ3ZA4Vw/w-d-xo.html
Great build, good design choice.
How big is the modern shed? What was your final cost? And I didn't see a materials list, is that available? Thanks so much!
it's 10'x10'
Cost breakdown is here!
th-cam.com/video/qUXTZ3ZA4Vw/w-d-xo.html
My Course has the materials list!
Great She'd build, well done , who wouldn't love a shed that good 👏 😊
Impressive! Very well done!
Me over here watching this while I struggle to assemble my hot pocket heating tray.
The shed(looks more like a small home) is good enough for someone to live inside, so many homeless people live under the bridges or on the street...🤔
Very good job guys!👍
Appreciate it! Thanks for watching!
Great job guys...I love it
Killed it! Well done!
We've had wood sheds for years in the UK, no gutters needed or fancy floor crap and our shed has been up for as long as I can remember, no mold and it's solid as a rock.
Looks super good! Only 3 things I would have added, insulation, a small heater, and some sort of wood sealant over the bare plywood spots. Looks awesome though!
🤔 yes...I kept waiting for the insulation stage & wondered if I missed it 😹 why no insulation on this gorgeous build?
Those would all be good additions! Thanks for watching!
Love It! Great job!
Impressed. Very nice. You da man.
Beauty! 👍🏼
If I get around to building a similar project, I'm going to also include a man-door.
But I really like what you built.
And I'm curious how many hours you had to spend at your editing software to get the vid to look so smooth..... AND keep it under 10 minutes.
Kudos!
Thanks! And a lot lol!
Insanely cool! Would love to know pricing estimate and work hours on this project! Also If you needed any permitting... Let me know!
I appreciate it! Thanks Jonathan! I would budget around $4,500. I hope to put out a cost breakdown video soon!
Looks very nice!
Steller job! Looks fantastic.
Nice. I only have one question. Do you not have to use a damp proof under the base plate onto to the concrete, to stop moisture rotting it out.
Nice ideas for my home build though.
I think they used pressure treated lumber against the concrete.
@@MrTenkara sure it is. Still never seen anyone put it straight on to concrete before
Very cool! How's the flooring you used for the exterior siding holding up over the winter? We're in Canada and literally in the middle of doing a similar build (got a matte black roll up door at our local Rona for a steal) but we're deciding on what to do for the exterior.
After one season - so far so good! I definitely don't think the LVP is a great idea if you leave in really hot climates, but I'm hoping for the best in my temperate area.
That's awesome on the door deal - mine was crazy expensive since I bought retail.
I would love to see the final result if you want to shoot me a DM of the final product @ATimprovements. Thanks for watching!
Pix would be nice, but not on Utube comments I guess.
Love the finished bits and pieces
Truly amazing and you plus your friend are so talented too 👍👍👍👍
Great job! And you clearly know what you’re doing! I’m a little disappointed by some of the comments saying you should have done this or that. Some people think they’re experts but in reality, they just do things differently than how another might do it. Again, amazing job!
underrated comment
Some of us are professionals of our trade be it roofers framers finishers ect you have second hand disappointment to good and valid criticism 😂
I appreciate your support!!!
I'm not gona lie, my only complain is that you didn't insulate the shed.
Lies!
Beautiful!
Awesome job!
This does look nice, maybe you did not film it, but I was shocked at you did not show any waterproofing only other then the one window. I would think you would add some type of liquid applied bond sealant and under all the trim at the corners. I have see the T11 siding rot at the bottom of structures when done like this. However, that did take years to rot.
It’s really really nice! Well made, attention to detail is obvious. Ignore the armchair “contractors.” And you built it yourself so you determine the quality. I love it (even though I’m nobody). 👍
I’m a real contractor and I’ve seen nicer dog houses, so to claim it’s the worlds nicest shed is bull shit and why most my jobs are repairing DIY’s jobs.
@@absurdlypossiblepodcastnet2084
Do you mind telling us what you would do differently? I’m planning on building a shed and would like more incite
I love the lights on either side of the rollup door
Amazing what you did it and how you explained all. Also very stylish 😊. I can’t wait to see more creative work from you.
I appreciate it!
I would add 2 things! Light insulation, and a row of gravel at the back where rain water will hit the yard...
And then, totally make this a mini backyard gym.
GREAT build!! Love it.
Wow this is beautiful
The floor looks super!
The neighbours must love this too 😱 twice as tall as the old tin shed, extending approx 6 to 8 feet above the fence line!
Haha there is always something to complain about.
What is the reason to not build the floor on top of the cement foundation? Could the walls be anchored in to the cement foundation? The shed does looks good though.
Maybe just to raise it a lil bit higher.
I have the same old shed he removed, water is definitely an issue with slab that low.
So the wood would last. In heavy humidity areas, winter in my case, without cement the foundation the building will root in 5 years. If you want to last spend a few hundred bucks and build a 10 cm concrete foundation. Also without foundation, even if the building is made from humidity resistant materials, because of humidity the building under heavy load will end up like the pizza tower. A 10-15 cm concrete foundation saves the investment. Wise decision from the builder
@@nistb2123 i think he means, why not use the cement as the floor? Instead of making an extra layer
@@Mr.Ramirez95 there’s only one reason a slab is that low… cost
Beautifully done 🎉
This built was awesome to watch. Please do more.
I appreciate it! I’m working on it!
Why did you go through the trouble of making a plywood floor (if the probably uninsulated) concrete foundation can function as floor, risking to generate rot in the floorboards over time, due to seasonal damp rising from the concrete? On the design, nicely done! Made me think about a Japanese build somehow... Job very well done, indeed! ✌️😁
No gutters huh?
Nope, decided not to install them since I'm not too concerned with where it drains to. It might have been a different story if I was in Seattle lol
Gutters would be an easy add though if I ever see the need in the future, though. Thanks for watching!
Or insulation
@@lancemillward1912 why would I insulate a shed?
@@ryang5441 because variations temperature can make things you store there go moldy. Especially if there is no gutter.
Wow well made very nice beautiful thanks for sharing
Wow, that is a true work of art!
That is what you call ace. What a build! 👍
Wow , this is impressive!
Thank you for the excellent instructions and demonstrations.
Appreciate it! Thanks for watching!
Looks awesome
Nice work!
Congratulations, you're an inspiration