I’ve just bought another one and currently in the process of upgrading it to the cost of a TRX6… then gonna put the Traxxas and NT6 against each other 😊
Great looking rig. Was good to see you at the mines again.them rocks were very greasy today . Even 6 wheelers could struggle .great day great fun and great friends.
Great video bought the NT4 have been seriously impressed with it so far drag brake needs some adjusting and some unsprung weight is a huge help stock tyre's are amazing cross rc deserve more attention body on these is amazing and the headlights very authentic great run 👊
Definitely needs some inspiring weight, shorter lighter springs, wider stance and tyre foams changed for 3D printed or dual stage foams, I’d like a Fusion system in it for more consistent control but overall,, it’s an amazing rig
Modified mine on the weekend wide hex extensions beadlocks and brass weights performed incredibly well have to agree I might change to a softer foam or 3d inserts better control would be nice looking forward to seeing what you do with it .... subbed 👊
@@TimsRcsurgery You're welcome and just subscribed!👍 I've never seen this truck bevor, I like the 4x4 but this 6x6 looks also very interesting! Have a nice day 👋
That was an impressive rig Tim. It looks so smooth to drive and it coped really well on the slippy rocks, as you say it cos be made better but couldn't they all!
Ive got the nt4 and everything you said you would do ive done exept the motor the servo seems ok exempt the horn ive put a metal one on it the esc jerks to much so put a isdt90 so i can programme from my phone when im out love the rig now might hsve to upgtade to the 6x6 mm not sure yet might just hsve both cheers for the great video ❤
The one in the video was won by a subscriber on my competition website less than 24 hours after I released the video, BUT I’m currently on Aliexpress about to buy another one to upgrade 😃 unfortunately won’t be shipping until after 16th due to Chinese New Year
Great video, i like your style, smart rig, i have the NT4, i put wider hex`s on the axles to lose that extra thread and went to heavy metal beadlock rims, tempted to get the ABS rear bed for mine
Thx, very nice review my friend !! Agree, the actual ESC is decent, would be a killer with a 1080 or a complete swap for a Fusion. Any idea why cross RC speaks about "PRO 2024 NT6 " ? is there any older version ? a non-pro ?
Not exactly in box stock form.. but some grease and a balloon for the rx and swapping to a waterproof ESC/Hobbywing Fusion makes it as waterproof as you can get 😃
For a 6x6 I genuinely don’t think it’s in any way expensive, look at what you’re getting for the money. What else is there out there comparable for that sort of price, not to mention the quality, i certainly wouldn’t like to try and put the parts together to build one. But yes, not everyone has $550 kicking around
Awesome video great unboxing excellent run definitely a great looking rig been looking at them pretty much looks like a very capable rig
I’ve just bought another one and currently in the process of upgrading it to the cost of a TRX6… then gonna put the Traxxas and NT6 against each other 😊
Looks incredible. Cross RC make some beautiful models. Wish i could afford something like that.
Great looking rig. Was good to see you at the mines again.them rocks were very greasy today . Even 6 wheelers could struggle .great day great fun and great friends.
I miss the mines, it’s some spot!! 😃
Great video bought the NT4 have been seriously impressed with it so far drag brake needs some adjusting and some unsprung weight is a huge help stock tyre's are amazing cross rc deserve more attention body on these is amazing and the headlights very authentic great run 👊
Definitely needs some inspiring weight, shorter lighter springs, wider stance and tyre foams changed for 3D printed or dual stage foams, I’d like a Fusion system in it for more consistent control but overall,, it’s an amazing rig
Modified mine on the weekend wide hex extensions beadlocks and brass weights performed incredibly well have to agree I might change to a softer foam or 3d inserts better control would be nice looking forward to seeing what you do with it .... subbed 👊
Nice review of an awesome truck, great work! 👍
Thanks buddy, you seen the modified cantilever one yet?
@@TimsRcsurgery You're welcome and just subscribed!👍 I've never seen this truck bevor, I like the 4x4 but this 6x6 looks also very interesting! Have a nice day 👋
@@KPtain_RC ha, if you like it in this video you’ll love the modifications 😎
Thanks for the sub!! 💪🏼💪🏼
Great looking rig, was a good run out earlier! 👌🏻
I was well impressed with the NT6!! I’ll probably have another ordered by the nights over 😂
Great review!
Thank you, glad you enjoyed it 😊
Awesome Mog 6x6!!!
Great Vídeo my Friend and Amazing Unboxing and Review!
Thks 🐼👌🏻 for the Info Share!!!
Thank you buddy 😎😃
You're welcome my Friend!
Keep the Good Work 🐼👍🏻
That was an impressive rig Tim. It looks so smooth to drive and it coped really well on the slippy rocks, as you say it cos be made better but couldn't they all!
I’d honestly be more than happy to run it the way it is with minimal relatively free modifications
6x6 Mogs are so amazing! Nice unboxing!I like the double rear propellershaft drive.I take this system over on my 6x6 too.
A lot of modifications done to this since the video, it’s an absolute beast now 😎
This beast looks amazing. Looks like it drives really well out of the box
Phenomenal bit of kit! 😃
love it,looks awesome 👌👍👍😀😀😎😎
I’d highly recommend one! Cracking Truck 😃
Nice 👍🏾
Ive got the nt4 and everything you said you would do ive done exept the motor the servo seems ok exempt the horn ive put a metal one on it the esc jerks to much so put a isdt90 so i can programme from my phone when im out love the rig now might hsve to upgtade to the 6x6 mm not sure yet might just hsve both cheers for the great video ❤
The one in the video was won by a subscriber on my competition website less than 24 hours after I released the video, BUT I’m currently on Aliexpress about to buy another one to upgrade 😃 unfortunately won’t be shipping until after 16th due to Chinese New Year
Great video, i like your style, smart rig, i have the NT4, i put wider hex`s on the axles to lose that extra thread and went to heavy metal beadlock rims, tempted to get the ABS rear bed for mine
It’s an awesome rig for sure 😃
very nice crawler my friend 🤟🚘🤟
Thank you, I was really impressed by its capabilities right out of the box 💪🏼
Nice nice just put some upgrades and going perfect ❤
@@LuisTorres-rr5nv love this truck!! 😃
@@TimsRcsurgery thanks for the video very Explanatory, now I'll buy one 💪🙏
@@LuisTorres-rr5nvyou’ll not be disappointed 😎
👍💪🚚 amazing 🤩 nice rig
That thing is awesome
Гарна робота))
🚐🚛🥂
thinking of getting one!
They really are quality! (I’m nothing to with them nor do I get anything for saying that) just my opinion, you won’t be disappointed 😃
nice driving...
Thx, very nice review my friend !!
Agree, the actual ESC is decent, would be a killer with a 1080 or a complete swap for a Fusion.
Any idea why cross RC speaks about "PRO 2024 NT6 " ? is there any older version ? a non-pro ?
I can’t be sure, maybe just playing with names prior to release? Or maybe a kit version to be released in the future?
Is this the same as the JT6 version?
I would guess it’s the same running gear, I’m pretty sure the NT6 is the same as the AT6 with different body etc, I’d say the JT6 is the same too
Waterproof?
Not exactly in box stock form.. but some grease and a balloon for the rx and swapping to a waterproof ESC/Hobbywing Fusion makes it as waterproof as you can get 😃
Cross RC could take out the two speed, diff lockers, and make it more affordable for the U.S. market and they would sell a ton of these!
Why is it not affordable now? I bought this from Aliexpress and was around $500
@@TimsRcsurgery it's 550$ over here. Cheaper than Traxxas. But still expensive.
For a 6x6 I genuinely don’t think it’s in any way expensive, look at what you’re getting for the money. What else is there out there comparable for that sort of price, not to mention the quality, i certainly wouldn’t like to try and put the parts together to build one.
But yes, not everyone has $550 kicking around
For USA salaries any rc is cheap. Don't forget that in many countries salary is about 500$ / month
🎉❤ magnifique 🤩🎉❤
Thank you ☺️