Hi, I need an important information about kemei 1990 oil lubtification. When I remove screws I just have to put some oil there on the small groove on the metal blade, or there should be like a fiber piece that have to be filled with oil(not sold with the item) ? Because my problem is that the oil indicator let always shows its finished, also while I just added it. Thank you so much for your help!
Firstly the km809a are a lot better so I recommend getting them. Also if you replace blade correctly oiling the inside aswell as the blade then you will continue to get a nice clean sound 👍
Yes, but instructions clearly state if battery is fully drained, let charge for 1 minute before turning power on. This is so some juice can fill the battery for that one minute. Kind of like buffering a video and giving it that one minute buffer gap.
MY PHONES ide say Kemei 809a personally, people won’t agree with me but I’ve tested nearly all Kemei products and this for me lasted the longest. But bare in mind the motor isnt that powerful
Daniel Rugay you should buy new clippers. You can only get them from Greece as the spring are manufactured there. Will cost £20 all in for a tiny spring!! I know it’s ridiculous!
Hi, I need an important information about kemei 1990 oil lubtification. When I remove screws I just have to put some oil there on the small groove on the metal blade, or there should be like a fiber piece that have to be filled with oil(not sold with the item) ? Because my problem is that the oil indicator let always shows its finished, also while I just added it. Thank you so much for your help!
Where can I buy the entire blade assembly set for Kemei KM5017?
Please help!! Where i can buy springs of these??
Is this blade fit for kemei 809a? Where i can get this blade?
Hey buddy where to get these blades...provide any link or site
Andor ka spring kulke lagai ye plz
also where can i buy the blade ?
eBay
Bled kha se laye sir
do they get loud after swap? some people say this thats why i havent bought some. i was thinking of buying the Kemei 1986 on sale on amazon rn for 25
Firstly the km809a are a lot better so I recommend getting them. Also if you replace blade correctly oiling the inside aswell as the blade then you will continue to get a nice clean sound 👍
Ben Boud ty
Nice video!! You only need to change the cutting blade not the top blade correct?
Correct!
Wahl 8591 and Kemei 2600 blade be shared?
葉葉 Yes
What's the reason for changing the blades to wahl blades and which wahl blades did you use?
Harman Pahal I use the wahl taper blade, good for fading, the quality of blade is a lot better than the original Kemei.
When the battry get empty . Can it work with cable directly or not .
Ahmed Ali yes it works with cable in ad out
Ben Boud thanks much
Yes, but instructions clearly state if battery is fully drained, let charge for 1 minute before turning power on. This is so some juice can fill the battery for that one minute. Kind of like buffering a video and giving it that one minute buffer gap.
EL EVO well said 👍
इस मशीन का ब्लेड कहा मिलेगा कृपया बताईये
नया ब्लेड चाहिये कॉन्टेक कहा करे
is there any new clipper that can be modified easly that you reccomend ?
MY PHONES modified in what way
@@benboud7971 wahl blade for example
MY PHONES ide say Kemei 809a personally, people won’t agree with me but I’ve tested nearly all Kemei products and this for me lasted the longest. But bare in mind the motor isnt that powerful
Great video!! Hey can i use generic wahl blade with kemei 809a model too?
chamak dewan yes you can, I will be doing a video on that soon, very simple to change
@@benboud7971 Thanks you for your response. Be waiting for the video.
@@benboud7971 btw what do you think about Kemei Km-809a as a product overall? Is it good?
chamak dewan it’s not too bad, I thinks not the most powerful clipper but very light, makes cutting hair all day less stress on the wrist
@@benboud7971 i got the 809a because u said the wahl blade fits but when i put it on the blade moves up and down how fix this?
What kind of walh blade do I use?
Daniel Roman taper blade! I’m not a fan of the fade blade
@@benboud7971 can you send me a link for the blade because there is to many wahl blades thanks
Daniel Roman www.ebay.co.uk/itm/313112991799
Where i can buy those springs inside please help
Is it the tension spring that looks like the letter “M”?
@@benboud7971 yes thats it. I accidentally lost in
Daniel Rugay you should buy new clippers. You can only get them from Greece as the spring are manufactured there. Will cost £20 all in for a tiny spring!! I know it’s ridiculous!
Thank you so much. But luckily i found it already. Its a great relief. Lol thanks thou
Where can I buy a replacement blade for km 1997
Nico Yao Wahl blades fit on them. Yo can find them on Amazon/ebay
Could i use walh guards for my kemei?
manos moutzouris yes
you recommend this clipper ?
BroSkillzJavier buy the blade and clipper from amazon and I highly recommend this product