Thank you for your input. It seems that you have done this type of work before. Perfect observation. Rocks,roots, or debris would not be a problem either.
I love my driveway kit. I own a small irrigation company and it definitely works well with the 20lb sledge. I also have the SDS max bit if i want to use the hammer drill. My Ditch witch has a roto bore that I use as well.
Good investment if you have a business but not for a single home resident who will use it only once to install their irrigation or garden lights by themself.
I dont know why I reply to these absurd claims. But, for the sake of education here we go. The steel for the impact cap alone is $ 38.00 per pound. The machining, heat treating and tempering process (which is quite involved and complicated) also cost a bit more. The shafts, compression points, push points and push caps are each made of different types of steel and each has its own unique heat treating and tempering process tried and tested over 30 years. Dont forget your time to order each type of steel, program the CNC's and other unique machines needed to make the parts etc...... You might be able to make a replica from Play Dough for that much but, it might not perform to well.
Another option is a borit tool, it costs about $350. You'll need a water house connected to your hollow pipes and a drill to make it work. Replaceable tips are included. It wont work on rock but it will on most soils. Don't work hard, work smart.
What application would that be effective? Did you consider undermining the driveway or sidewalk with water? Roots and rocks, did you consider? Even if someone used a power washer I bet it would be limited where you can use it and I promise, 'simple' does not translate to best, easiest, fastest, safest results.
@DJS-mx8oz you should research it. I mentioned a method in use by pros. I didn't say create a cave from water. A pressurized water jet is what 1/4 in Wide?
It lessens the compaction in the soil. Also, you lose some soil. After the sidewalk/driveway crack... the homeowners are going to sue your butt off. I know I would. The method in the video avoids all that. @@gregs2143
We do sell to Australia. Go to bulletmole.com to see the pricing then give me a call at 909-270-0933. And give me your address then i can give you a price including shipping to your address. My name is Steve LaFontaine. We also have fittings for pipe in millimeters.
They are expensive and we respect your opinion. On the other hand, they are very difficult to make, they are made in AMERICA 100% and they do the job they are intended to do., which is also a very difficult job. we've been here over 30 years and sell them as fast as we can make them ( which is an extensive process) to customers who have nothing but good to say about the tool.
Lots of ways to achieve the same result. But i like this one alot. No water and mud and hollow spots under concrete.
Thank you for your input. It seems that you have done this type of work before. Perfect observation. Rocks,roots, or debris would not be a problem either.
I love my driveway kit. I own a small irrigation company and it definitely works well with the 20lb sledge. I also have the SDS max bit if i want to use the hammer drill. My Ditch witch has a roto bore that I use as well.
you're bull shitting I have it it"s a scame
Don't buy this thing it"s a garbage after spending $11k buying 3 sets of them they say no refund and I cammot use them for SHIT
I worked Construction for over 40yrs., put a lot of conduit in the ground, and nothing is as neat and clean as they show. Just saying.
Don't buy this thing it"s a garbage after spending $11k buying 3 sets of them they say no refund and I cammot use them for SHIT
Good Luck on your Shipping!!!!
Thank you
What is the distance it can mole ?and Can i get it Delivered to India.
This tool pack comes with enough shafts to go 16 Ft. You can buy additional shafts to go whatever distance you need. We can ship to india.
dont buy this thing
@@HUBtvRadio This customer does not exist in our database and has never bought a tool from us. Please refrain from posting malicious responses here.
Good investment if you have a business but not for a single home resident who will use it only once to install their irrigation or garden lights by themself.
i spent $11k buying this i can consciously say that this is BS= bullsh ssssshhhhhh
Nice tool but $2700? I can make my own for about $200
I dont know why I reply to these absurd claims. But, for the sake of education here we go. The steel for the impact cap alone is $ 38.00 per pound. The machining, heat treating and tempering process (which is quite involved and complicated) also cost a bit more. The shafts, compression points, push points and push caps are each made of different types of steel and each has its own unique heat treating and tempering process tried and tested over 30 years. Dont forget your time to order each type of steel, program the CNC's and other unique machines needed to make the parts etc...... You might be able to make a replica from Play Dough for that much but, it might not perform to well.
Another option is a borit tool, it costs about $350.
You'll need a water house connected to your hollow pipes and a drill to make it work. Replaceable tips are included.
It wont work on rock but it will on most soils.
Don't work hard, work smart.
No, a simple pvc pipe connected to a pressure washer or garden house will work and is a hell of a lot cheaper
Why thats absolutely genius
What application would that be effective? Did you consider undermining the driveway or sidewalk with water? Roots and rocks, did you consider? Even if someone used a power washer I bet it would be limited where you can use it and I promise, 'simple' does not translate to best, easiest, fastest, safest results.
@DJS-mx8oz you should research it. I mentioned a method in use by pros. I didn't say create a cave from water. A pressurized water jet is what 1/4 in Wide?
It lessens the compaction in the soil. Also, you lose some soil. After the sidewalk/driveway crack... the homeowners are going to sue your butt off. I know I would. The method in the video avoids all that. @@gregs2143
Where ca i buy this?
dont buy this thing
Hola dónde puedo conseguir esto,,
Don't buy this thing it"s a garbage after spending $11k buying 3 sets of them they say no refund and I cammot use them for SHIT
So you can use this to run 2" conduit, but the compression point is only 1 3/4 inches. Lol. Good luck with that.
I want to buy this one Australia
Call me at 909-270-0933. Give me your adress and what you are interested in buying and i will give you a complete price delivered to your address
dont buy this thing
How much
We do sell to Australia. Go to bulletmole.com to see the pricing then give me a call at 909-270-0933. And give me your address then i can give you a price including shipping to your address. My name is Steve LaFontaine. We also have fittings for pipe in millimeters.
1k for this?
I don't know where you saw $1k. It's almost $3k on their website.
Well the sidewalk kit is just under $1,000.
Don't buy this thing it"s a garbage after spending $11k buying 3 sets of them they say no refund and I cammot use them for SHIT
😮
That's a "RailRoad" bar. Just saying.
Don't buy this thing it"s a garbage after spending $11k buying 3 sets of them they say no refund and I cammot use them for SHIT
If you are planning to do this for a living, just buy a real missile and rent a compressor.
Or buy a borit tool and a drill.
Don't buy this thing it"s a garbage after spending $11k buying 3 sets of them they say no refund and I cammot use them for SHIT
Don't buy this thing it"s a garbage after spending $11k buying 3 sets of them they say no refund and I cammot use them for SHIT
This customer does not exist in our database and has never bought a tool from us. Please refrain from posting malicious comments here.
This is a garbage tool. Buy a real mole. The missile
Don't buy this thing it"s a garbage after spending $11k buying 3 sets of them they say no refund and I cammot use them for SHIT
The most ridiculously overpriced item I have seen
They are expensive and we respect your opinion. On the other hand, they are very difficult to make, they are made in AMERICA 100% and they do the job they are intended to do., which is also a very difficult job. we've been here over 30 years and sell them as fast as we can make them ( which is an extensive process) to customers who have nothing but good to say about the tool.
Don't buy this thing it"s a garbage after spending $11k buying 3 sets of them they say no refund and I cammot use them for SHIT