How To Repair Neptune Apex Energy Bar|EB832|DIY|How to
ฝัง
- เผยแพร่เมื่อ 19 มิ.ย. 2024
- How to repair a Neptune apex energy bar EB832. DIY, fix for 5$.
NOYITO AC to DC Precision Buck Power Supply Module AC 110V 100V-264V to 12V 500mA Isolated Step-Down DC Module (12V 500mA) www.amazon.com/dp/B07FNJZ1PR/...
Thanks
After a power outage in my Garage today , my energy bar832 apparently is not working all lights are on but no current on outlets. Thank you for this video you save me a lot of money.
I sent my EB832 into Neptune for repair and they charged me $175 to repair. Now I have a few power supplies on hand that I picked up for less than 4 bucks and will repair myself from here on out. Pick up some Solder wick to de solder next time you need to perform this fix. 👍
Thanks, you just saved me $200, this works for me.
Good to see you fixed the Eb8. 👍
You saved me hundreds of dollars, this worked!! thank you so much for this video!
Awesome video!! Been looking for a fix! thanks
Wish I saw when I discovered the exact same problem. Excellent instruction for the fix. Bought a new bar (discounted from Neptune) but will keep and fix the old one as a spare.
😅🎉love when you beat the system for $8 bucks. Thanks
I just did mine, fixed it!!
I had this exact failure. I followed the thread of reef2reef and got it working perfect. Great video!
Saves some $$$ for sure!
I was looking for answers on reef2reef and couldn't find anything. You should send the article link. I swear their search function doesn't work properly. If I'm having an issue someone else has to be having the same issues and likes to tear into things.
I love you....!!!!! Thank you... espero que sea mi solución. Se fue y vino la electricidad de golpe y fue ahí cuando fallo mi apex. Tiene el mismo problema que comentas. Voy a comprar y reparar, te dejo saber el resultado. Gracias por tan valiosa informacion.
Those are capacitors. And they do tend to be a high failure item in electronics. If you're going to swap the entire sub board then desoldering the pins from the top is FAR easier. Then just place the new board on the pins and resolder. The key is flux. It will help in both directions. Also it would be an even better move to test the caps on the "bad" board to find the issue. If it's a bad cap then it's a .30 repair.
Did the ribbon for the front led indicators not get connected?
I followed all your steps but I can not longer connect to my fusion and I cannot get the blue light to come on. Has anyone had this issue?
Having difficulty finding part. One that is posted here is correct but posts the wrong part on amazon. Can someone send the correct link pleaee
Do you have the Amazon link?
Sorry, in the description
Thanks a lot for this, i got a question please dose 220v devices working on energy bar 832?
I saw a video on TH-cam showing that each outlet have a rely will work on 110 or 220v.
Can you please confirm?
No idea sorry
@@JCSReefing Thank you a lot
I am also looking into this. What video did you watch?
@@hieuuunguyenduc310 finally i tried it by my self and its totally fine and working i even tried a hair dryer, still the apex will give you a voltage triangle warning and will not read the power consumption for each outlet let correctly.
I have a video to approve that i can send it to you.
How do I turn one into a 10 outlet plug with the old black metal housing?
No ideah
Is a 1000ma one too much they seem to have sold out on the 500ma
Not sure? 🤷🏻♂️
I had to go find one on eBay instead, I have an extra now? It came in a 2 pack
How do you ask the chip at Amazon. I do not find it.
It is in the description of the video
Good to know about the fix, but oof that soldering is no bueno. I'm not trying to be a dick, but that is some super sketchy to dangerous work that nobody should ever repeat. You never want to bore out the through hole on a PCB like that. There is a pad that connects to a trace inside the PCB that you have destroyed which is why you have balls of dull looking solder instead of nice and shiny divots. You are dealing with mains to DC conversion on those traces and there is probably very minimal connection between the leg and the trace inside the PCB which could arc and potentially burn your house down.
just tore into mine, after it did this since we lost power earlier today... ugg