Wltoys 144001 Hobbywing 10BL120 esc & 4 Poles 3650 4300kv motor
ฝัง
- เผยแพร่เมื่อ 20 ส.ค. 2024
- Just having fun upgrading this little 1/14 scale rc buggy in this video I installed a brushless system in the buggy my phone died as I was doing speed runs but I got about 50 mph with 2s stock battery and stock gears I'm sure I can get more top speed.
THANKS FOR WATCHING...
![เบิ้ล ปทุมราช - สาวสอง ( มีมี่ของอ้าย ) ft. ตาต้า,ต้องเต [OFFICIAL MV]](http://i.ytimg.com/vi/mqlMjnP08XI/mqdefault.jpg)
Dope I've wanted to upgrade mine for a while might have to pull trigger, the rc club I'm in deff doubted this Lil rocket. Nice vid
great ,Tks
thanks
the music made the video reaaly hard to watch...
What kind of music would be cool? It’s hard to find good music
Voice over or just record the audio when you do it
Put a 4.5trun brushless motor the esc you got well work with that motor and get a 2s shorty lipo.
Would it be direct fit or will I need some modifications ?
Fit right in
I am noticing a stutter on slight throttle.. Can we avoid this? Using the same combination as in this video
Gear down 2 teeth. And have your settings like punch level at 1 and no timing
Or your sensor wire is almost off on the motor or esc
Hi brother, are the bullet connectors included in the box? I have ordered the T- version with deans connector for the battery but I need to solder the motor wire connectors. If not included, I should order connector therefore I'm asking :)
No they don’t come with bullet connectors, you have to buy some that will fit your motor
@@weekendrc thnx bro, ordered some 4 mm bullet connectors
Did you use a program card for his setup or just plug and play?
I was able to use the program card for the esc yeah, I was surprised because some people aren’t able to use it because their motor isn’t hobbywing
@@weekendrc thinking about getting that esc for my surpass hobby engine 3650 3900kv. How is it?
@@martez752 the esc is great
Do you have a model number for these hubs and will they fit the 124018? How are the hubs working out for you?
I don't not sure if they will fit, let me know if you find out
Guauhh 👍👍👍👍
Do you have the link for the 4mm bullets or name? I purchase the wrong ones and had to return to amazon..
I bought 2 of these here www.amainhobbies.com/protek-rc-4.0mm-super-bullet-solid-gold-connectors-2-male-2-female-ptk-5032/p150714
Hi bro.. My throttle is functioning in opposite direction.. Using flysky nb4 pro.. Do you know what to change Or is it the motor and esc wires that i need to change?
There should be a settings on you flysky where it allows you to reverse throttle look for something that say reverse or rev something like that
Hi marc, saw an old post with a .28 for sale if you still have it lmk
Yes
Do you run sensorless motor on it?
If so can you swap wires over or is it gonna catch fire or work just fine?
Can you use a 4-pole motor with this esc plug and play?
No you have to solder on the connectors to the esc that your motor uses
@@weekendrc Okay, but if the motor already has the right 4 mm connectors?
@@Abszurdista-fatalista you’ll need to solder the 4mm female connector to the esc so you can plug in your motor because the esc just comes with wires
@@weekendrc Okay, thank you.
Can you run a 19t pinion gear with that motor mount or just stock?
I haven’t tried running a 19t pinion only stock, give it a shot and let me know how it goes in fact it’s all about trial and error
You can go 110 kph with stock tires 👊🏻👍🏻
Probably not, the stock tire will unglue themselves you would definitely need contact foam tires
@@weekendrc Wait, I must change the tires??
@@tsi_yoav2363 stock tires will work but eventually rip off so would be ideal to put some foam tires
Is this on 2s or 3s??
It can run on 2 or 3s it need a wheelie bar tho, it would be nice to find one for this rc car
@@weekendrc how fast you reckon for 3s?
@@Sam-nz2zs not sure I haven’t recorded top speed on this yet
Standard size stuff fits on this?
You have to modify stuff because it’s pretty much crammed in there and the body won’t fit unless you modify the posts
@WEEKEND RC thanks, had a feeling. Any way enjoyed the vid man.
Is it fine to use stock spur gear as it’s plastic?
it's fine but with upgraded it probably won't last
@@weekendrc with upgrade steel it won’t last?
Hi what's the size of the female connectors used for the ESC?
Are you talking about the connectors that connect to the battery or the connectors that go to the motor?
@@weekendrc The female connectors attached to the ESC for the motor
@@RajA-mj7me they are 4mm
@@RajA-mj7me the connectors didn’t come attached to the esc I had to solder them on my self I used 4mm female bullet connectors since the motor comes with 4mm male
@@weekendrc thanks for the info bro
Guys can someone let me know with the same build I am noticing a clogging issue at minimal throttle.. How to overcome this?
I’m not a pro but I found a lower kv motor fixes it for me atleast
@@Texas_bikes66 not realy fix it i use 2300kv on 60a esc and its still coging just a little bit for start runing