That’s awesome, I’ve always been told that you couldn’t pull water from a tank when using a direct drive it had to be a belt driven pressure washer. Plus your surface cleaner mount is ingenious, how you might want to lock it in place when you’re not standing next to it. Again great job! James
love the setup, I've been starting doing some side work. nothing like this but it's been fun watching other peoples videos learning some tricks to the trade.
Thanks for sharing your trailer. I've been trying to find the oil drain hoses and now I have one ordered for e-bay. Hope your 2023 season is a good one. SprytNa Exterior Cleaning in IL.
Turned out really nice. It really gave me some good ideas for my trailer. I do like how you use that ladder rack to hold a surface cleaner. Have a great season.
@Renew Power Wash I have a question about the battery hookup.i noticed something. Do you have the (+) and black (-) cable running from the machine to the battery? Then you have a separate black wire attached to the aluminum frame to the battery for a better round? Or connect it to the trailer frame? Just want to make sure.
I just seen your video of your trailer, never seen it but my trailer is set up the same way, but I only have one different thing is I added a 5 gallon gas tank, I got tired of running out of gas, but good job,
How does the pump run on the preditor the 6.3 gpm, I have a Honda gx390 and was thinking about ordering that pump off envirospec would you recommend it?
My recommendation would be at 11:14 to put an actual ratchet strap to secure the surface cleaner. It’ll keep DOT off your back since a bungee cord is not an approved fastening device. Talking from frustrating experience
Awesome trailer! Do you ever have trouble with the 4 gpm pulling water from the tank? I was thinking of using two 4 gom pressure washers pulling from one tank. I love how you set everything up
My 4gm machine doesn’t pull water. It’s a direct drive so it requires water pressure/feed from the house. My 6gpm machine pulls water great from the water tank.
@@RenewPowerWashCo Could you put a 12v pump on the tank to pressurize the water going to the direct drive pressure washer pump? Is there any reason that wouldn't work?
Harbor Freight. It's a truck rack and I did have to drill and mount differently than you would if you installed in a truck bed, I didn't use any of the mounting brackets that came with the rack and I had to buy some bolts, nuts and washers to make it work, but it was simple.
This is not a Predator pressure washer, it’s just a Predator 420 engine. The pump is a gear driven 5.5 gpm pump that I attached to the engine. Some people call it the budget build but the only thing budget is the engine everything else is pricey. Lol
Where did you find the Comet pump cheaper than the AAA? I have same machine and I did like you. I bragged in a video and then it gave me some problems. More than likely will replace this Summer.
You need to strap that surface cleaner handle to the trailer...that thing could come off the hook, flip around and go through a windshield and kill someone.
Nice build bro! Does your wife work with you? I was actually telling my wife I wanna upgrade my 2.5 to a 4.0 at least an she’s like I’ll use the 2.5. Which got me thinking of setting up like this before I seen this video! Also does your Simpson get your predator hot due to exhaust facing it? An do you do this full time?
And get rid of them vp fuel tanks get you 10 or 15 gallon stainless stell fuel tank I guess you gotta work your way up that’s how we started out little set up like that now we have 3 big trailers and and nothing but 3500 psi and 8 and 10 GPM MACHINES
Hi handsome. Great channel. Did you consider getting a honda igx800 ? Im a Honda worshiper. I love my japanese goods and services. Well know that you have saved money, could you please take your savings and invest in cryptocurrencies: buy XRP,XLM,XDC.
No bs, love all these videos but I run a pressure washing business w a 4gpm machine in the back of my truck, 250 ft of pressure hose... You guys don't need to look all fancy fancy to make money. I make 500-2000$ a week just doing residential homes. I don't have a buffer tank, i don't have a rig, or any of these unneccesary equipment. All you need is a J-Rod, 3.5-4gpm machine, and 200ft of pressure hose so you don't have to move your machine, and a surface cleaner. Thats it.
Bro that is such a good idea to hold the surface cleaner on the ladder rack. I’m going to copy that
Seriously impressed with the quality of Southeast Softwash's pressure washing trailers!
They make good equipment
That’s awesome, I’ve always been told that you couldn’t pull water from a tank when using a direct drive it had to be a belt driven pressure washer.
Plus your surface cleaner mount is ingenious, how you might want to lock it in place when you’re not standing next to it.
Again great job!
James
Looks bad ass 🎉
Very nice👍
love the setup, I've been starting doing some side work. nothing like this but it's been fun watching other peoples videos learning some tricks to the trade.
Nice job with the build 👍🏻👍🏻
awesome I would be proud of it too .Nice one !
Nice and simple upgrade
Thanks
Very nice job, I will duplicate your surface cleaning holder. Very good idea.
Yes sir. It seems to be working great so far
Love your setup
Looks great
Looks great 👍🏻
looks great and organized
Thanks
So many tips I'm about to take from this. Looks great!
Nice
Thanks for sharing your trailer. I've been trying to find the oil drain hoses and now I have one ordered for e-bay.
Hope your 2023 season is a good one.
SprytNa Exterior Cleaning in IL.
Nice. Thank you for the kind words.
Damn brother! Thats a well thought out rig. Happy for you man. Great ideas to take away. Make that money!
Thx
Congratulations and good luck!! It looks Awesome!
Thanks
The two valves on drain pipe is great. Not sure why you would need to fill buckets with SH ever but curious the application need. Thanks
great job
Thank you for the content! It is very helpful.
You bet. Thanks for watching
Nice layout!
Thank you
Turned out really nice.
It really gave me some good ideas for my trailer. I do like how you use that ladder rack to hold a surface cleaner.
Have a great season.
Nice
@Renew Power Wash
I have a question about the battery hookup.i noticed something. Do you have the (+) and black (-) cable running from the machine to the battery? Then you have a separate black wire attached to the aluminum frame to the battery for a better round? Or connect it to the trailer frame? Just want to make sure.
Looks good man! Can’t wait to see it riding around town.
Thanks bud
"good work"!👌👌👌👌
Thanks
Great stuff!
Thank you
Hey bud...great video. Anything special about mounting that 2x8 on that trailer rail for you reels? Want to do that to mine....thanks!
I am new at this I have a small pull a long pressure washer I think your setup is awesome God bless it you did a very good job
Thank you 🙏🏼
I just seen your video of your trailer, never seen it but my trailer is set up the same way, but I only have one different thing is I added a 5 gallon gas tank, I got tired of running out of gas, but good job,
Wow, looks great, but where did that toolbox from please ???? thank you....
Nice real nice
Love it. Earned my subscribe!
Sweet. Thanks for the sub
Awesome video thanks for sharing I appreciate all the information
What’s your opinion on single axle vs tandem axle trailer
Hey good looking setup how did you adjust height on ladder rack?
Nice set up. How much water/SH do you use on an average 2500 SF home?
How does the pump run on the preditor the 6.3 gpm, I have a Honda gx390 and was thinking about ordering that pump off envirospec would you recommend it?
Absolutely. Upgrade for certain. The gx390 is awesome. Envirospec has great equipment.
I’m a New Sub. 👍🏽
Where did you get your? Toolbox
Your setup looks awesome!! Did you ever consider, or did you raise those tanks a little so gravity could help feed your pumps?
I did
did you have to buy an external unloader or could you have run that to your buffer tank?
Very Nice Setup! You happen to have an estimate on a total cost for the setup?
What pump do you have on the predator engine
My recommendation would be at 11:14 to put an actual ratchet strap to secure the surface cleaner. It’ll keep DOT off your back since a bungee cord is not an approved fastening device. Talking from frustrating experience
Nice. I need to put that wood rail for my reels on my 5x10. How did you secure it?
Any recent updates things you would have done differently? Building my own at the moment how’s the ladder rack holding up ? Thanks
Not yet
Awesome trailer! Do you ever have trouble with the 4 gpm pulling water from the tank? I was thinking of using two 4 gom pressure washers pulling from one tank. I love how you set everything up
My 4gm machine doesn’t pull water. It’s a direct drive so it requires water pressure/feed from the house. My 6gpm machine pulls water great from the water tank.
@@RenewPowerWashCo
Could you put a 12v pump on the tank to pressurize the water going to the direct drive pressure washer pump? Is there any reason that wouldn't work?
where in florida are you located?
North east
@@RenewPowerWashCo St. John’s area?
@@mgwashing Fernandina Beach area
Hey man where did you get the ladder rack. Is that for a trailer or did you have to modify it
Harbor Freight. It's a truck rack and I did have to drill and mount differently than you would if you installed in a truck bed, I didn't use any of the mounting brackets that came with the rack and I had to buy some bolts, nuts and washers to make it work, but it was simple.
I’m just curious, why can’t you direct feed the predator? Is it the original pump on the predator or did you add a new one?
This is not a Predator pressure washer, it’s just a Predator 420 engine. The pump is a gear driven 5.5 gpm pump that I attached to the engine. Some people call it the budget build but the only thing budget is the engine everything else is pricey. Lol
Love the setup/great video! Do the machines rust in the rain?
No they rust by not rinsing your equipment. Salt/bleach does more damage than water
Any idea on price point?
I’m curious why didn’t you add an 8GPM machine?
Don’t need it right now, but maybe soon my man
Where did you find the Comet pump cheaper than the AAA? I have same machine and I did like you. I bragged in a video and then it gave me some problems. More than likely will replace this Summer.
www.toolbarn.com/products/comet-6311010010?OrderlyEmails&
@@RenewPowerWashCo Thanks. Have you ever tried to pull water with that machine?I have been asked before,but have never had to yet.
@@jonboysprowash7845 it won’t pull water. It’s a direct drive meaning it has to have water pressure from house or a pump coming off the water tank
@@RenewPowerWashCo Ok thanks. 👍
When you are downstream do you dilute your SH tank?
No. It dilutes through the downstream injector
How come you don't run fluid through the reels?
The reels will lay a very long time compared to when running chemicals through them. Just my preference
What’s a estimated cost for a rig like that
How much does it weigh?
Not sure. Maybe 1500
Can you show me where you bought everything and what everything you added new sub to the channel.
thank was wondering what to do with my 5x12 didnt think it would fit itnow i will set it up thanks
Nice
You need to strap that surface cleaner handle to the trailer...that thing could come off the hook, flip around and go through a windshield and kill someone.
Nice build bro! Does your wife work with you? I was actually telling my wife I wanna upgrade my 2.5 to a 4.0 at least an she’s like I’ll use the 2.5. Which got me thinking of setting up like this before I seen this video! Also does your Simpson get your predator hot due to exhaust facing it? An do you do this full time?
And get rid of them vp fuel tanks get you 10 or 15 gallon stainless stell fuel tank I guess you gotta work your way up that’s how we started out little set up like that now we have 3 big trailers and and nothing but 3500 psi and 8 and 10 GPM MACHINES
Need to get you a v twin Honda 3500 psi with 8 or 10 GPM son that mf will rock your world let me tell you ol son u want ever mess with them 4 GPM
FROM WAT IVE READ U WILL REGRED USING WOOD
Hi handsome. Great channel. Did you consider getting a honda igx800 ? Im a Honda worshiper. I love my japanese goods and services. Well know that you have saved money, could you please take your savings and invest in cryptocurrencies: buy XRP,XLM,XDC.
No bs, love all these videos but I run a pressure washing business w a 4gpm machine in the back of my truck, 250 ft of pressure hose... You guys don't need to look all fancy fancy to make money. I make 500-2000$ a week just doing residential homes. I don't have a buffer tank, i don't have a rig, or any of these unneccesary equipment. All you need is a J-Rod, 3.5-4gpm machine, and 200ft of pressure hose so you don't have to move your machine, and a surface cleaner. Thats it.
Yeah that's where I'm at this is nice too have maybe in the future when the overhead allows it.
That absolutely works for what you’re achieving. If you want to make 5-10k a week you couldn’t come close w that set up.
Looks great.
Looks great 👍