I'm working on a mpl02a25lv. Cranks, no start. The hour meter doesn't work unless you're starting and then it goes back off. Can't find a service manual for it anywhere. Any ideas what I can check?
I have this very same forklift. I currently have the same code active on mine but after a short. Of no response from the pedal it started to work again and hasn't stopped since. Should I assume the sensor was stuck maybe in some way? Am I good to go or should I go ahead and change the sensor anyway? If you can help me with another question, we sent have the machine running and everything seems to work except it will not go forward reverse or have any hydraulic functions. We assume the seat switch is bad and that's what is preventing it from functioning. Is it possible there could be anything else preventing us from using the machine? We plan to work on this tomorrow.
I'm working on a mpl02a25lv. Looks pretty identical to what you're working on, in the video. I have e21 e23 and e34. Found some messed up wires, replaced a maf sensor pigtail. How can I clear the codes? Is there an e-mail we can communicate through, or somethin?
I always prefer using a code reader to clear codes on nissan/cat/mitu trucks with the K21/25 engine...the pedal dance with the accel pedal is to much of a pain
Nice diagnosis, good to see you back.
You make awesome videos, thanks for your time. Keep up the great work!
+Arnulfo Sandoval thank you
Code 27 with no start is usually can sensor. Code 28 usually spark plugs and or coils. Always use OEM sensors, aftermarket don’t work or won’t last.
Nissan such a easy truck to work on.
I'm working on a mpl02a25lv. Cranks, no start. The hour meter doesn't work unless you're starting and then it goes back off. Can't find a service manual for it anywhere. Any ideas what I can check?
I'd start with the key switch first. Make sure the IG terminal does not loose power when key is switch to start position.
@@forkliftgeek10 thanks, I was thinking along that line myself. Now I got to find a schematic for the wiring.
Do you have a part number for that crank sensor
I have this very same forklift. I currently have the same code active on mine but after a short. Of no response from the pedal it started to work again and hasn't stopped since. Should I assume the sensor was stuck maybe in some way? Am I good to go or should I go ahead and change the sensor anyway?
If you can help me with another question, we sent have the machine running and everything seems to work except it will not go forward reverse or have any hydraulic functions. We assume the seat switch is bad and that's what is preventing it from functioning. Is it possible there could be anything else preventing us from using the machine? We plan to work on this tomorrow.
Check the dash display it should say if the seat switch is not engaged. U could jump the seat switch to see if functions come back.
@@forkliftgeek10 and it lives!!! We jumped seat switch.... Paid $250 for it...
I'm working on a mpl02a25lv. Looks pretty identical to what you're working on, in the video. I have e21 e23 and e34. Found some messed up wires, replaced a maf sensor pigtail. How can I clear the codes? Is there an e-mail we can communicate through, or somethin?
You can use an obd code reader to erase the codes.
Where on the forklift is the obd2 port
@@elektra4400 under the cup holder
Thanks for the video. Could I make a request? If you ever do a toyota 8 series on setting the vf voltage with the regulator.
+Forklift Solutions sure once I get an 8 series to work on.
I always prefer using a code reader to clear codes on nissan/cat/mitu trucks with the K21/25 engine...the pedal dance with the accel pedal is to much of a pain
ketcamaro what kind of scanner do you use?
You can remove the battery cable for about 2 min and it removes the code of remove ECM and vcm fuses and put it back and they erase
Where on the forklift is the obd2 port?
Nice teach @ForkliftGeek
How can I get the book for all codes I have code e-38 on my Nissan
E38 is abnormal fuel pressure sensor signal
What can diagnostic tool is that one
The one I used to erase the code is a mac tools ET80.
Another simple job road tech should of found in 20 minutes
What kind of oscope do you have?
+Flash Gaming picoscope
Good
Request : steering sistem toyota 8 series.
Is that a regular scanner?
+Flash Gaming generic obd2 code Reader.