Windshield needs fluid on the inside as well get somebody to assist by applying pressure from the outside at the exact spot you’re repairing…thanks for the great results n following instructions
The resin works. The windshield just isn't being repaired properly. You have to use a tool that attaches to the windshield from inside the vehicle. It straddles the crack with suction cups. Then there is a rod in the middle that you line up with the crack and screw in towards the windshield applying pressure directly on the crack. This spreads the crack open so that it can be filled with the resin. The resin also needs to be applied with a q-tip dipped in resin. Start at the lowest parts of the crack and slowly move it upwards. Allow the resin to be pulled into the crack before advancing the q-tip. If you start from the top and work down, the resin will just run down and over the crack leaving air pockets. When finished applying the resin, go back inside the car and relieve the pressure by unscrewing the center rod on the tool allowing the crack to come back together. This will squeeze out any excess resin. Go ahead and remove the tool or slide it along and repeat for longer cracks. Then apply the curing strips. 👍
You did that all wrong. Put your hand inside and push pressure onto the cracks as you pour the liquored on so it can fill the gap as the gap will be slightly apart by the pressure. Don't kill people's hope with a fake video just cause you can't follow instructions
Thank you so much for this tutorial. My windshield cracked and the insurance does not want to pay for it. So, I will do exactly what you are doing here. Thank you.
thank you so much for your honest review , i was about buy it from aliexpress , they misleading customers because this will not remove crack as they saying thank you again
It's actually a scam!💩 I will NEVER buy any Chinese product again. This is the second big deception that China has done to me. The first was with a so-called welding machine which was actually a soldering iron but even that was unusable! Ordinary Chinese scammers!💩🚾💩🚾
The resin wasn't applied correctly. Missing was a helper sitting inside to push against the glass to slightly open the crack on the outside of the plastic center membrane. This would have allowed the resin to flow into the crack and you would have seen it disappear. This wasn't a video showing a bad product, but a video showing improper application.
It's actually a scam!💩 I will NEVER buy any Chinese product again. This is the second big deception that China has done to me. The first was with a so-called welding machine which was actually a soldering iron but even that was unusable! Ordinary Chinese scammers!💩🚾💩🚾
It's a shame that improper application of the product causes viewers to blame the product rather than the persons who clearly had not clue as to what they were doing. I can't really blame them because the simple instructions supplied with this "kit" do not make it clear that the windshield needs pressure from the inside to allow the resin to fully flow inside. There are other videos that show this technique clearly and the results look like the windshield never had a crack. BTW those little suction cup "injectors" don't open up the crack - they still the inside helper.
Why blaming them. They basically reviewed the product . If they got money to fix or have all the tools needed to fix the window correctly, they wouldn't have to use this cheap/affordable (yes Its cheap over here) product in the first place
Sure we cannot see the crack but the crack still there. With how hot, then sudden rain pour cold and repeat the crack may appear again😅. The only fix permanently is change windhield. I also did this for fast fix but if it become worse claim insuran
It's actually a scam!💩 I will NEVER buy any Chinese product again. This is the second big deception that China has done to me. The first was with a so-called welding machine which was actually a soldering iron but even that was unusable! Ordinary Chinese scammers!💩🚾💩🚾
I have the same kit... it halfway worked on my hail damage crack.. I see splinters of the crack... wanted to try heat... like a heat gun... I really have nothing to lose..
It's actually a scam!💩 I will NEVER buy any Chinese product again. This is the second big deception that China has done to me. The first was with a so-called welding machine which was actually a soldering iron but even that was unusable! Ordinary Chinese scammers!💩🚾💩🚾
Resin only works on spot where you have chipping For long crack it in middle of the glass layers and there is no way resin will reach . You can keep applying from top but nothing will happen
Actually it does work, you just need to watch the videos where they follow the correct application technique. They just squirted the resin onto the closed crack, but what they should have done was have a helper inside pressing against the windshield to force the outside crack slightly open so the micro-resin could run in. Had they done that you would have seen the crack disappear as they moved along.
It's actually a scam!💩 I will NEVER buy any Chinese product again. This is the second big deception that China has done to me. The first was with a so-called welding machine which was actually a soldering iron but even that was unusable! Ordinary Chinese scammers!💩🚾💩🚾
It's actually a scam!💩 I will NEVER buy any Chinese product again. This is the second big deception that China has done to me. The first was with a so-called welding machine which was actually a soldering iron but even that was unusable! Ordinary Chinese scammers!💩🚾💩🚾
It's actually a scam!💩 I will NEVER buy any Chinese product again. This is the second big deception that China has done to me. The first was with a so-called welding machine which was actually a soldering iron but even that was unusable! Ordinary Chinese scammers!💩🚾💩🚾
This is not how you use this product. Filler needs to be put in between the windshield layers either through a drill hole or the crack chip itself. Just putting this on the outside and then scraping it back off wouldn't fix anything.
It's actually a scam!💩 I will NEVER buy any Chinese product again. This is the second big deception that China has done to me. The first was with a so-called welding machine which was actually a soldering iron but even that was unusable! Ordinary Chinese scammers!💩🚾💩🚾
Windshield needs fluid on the inside as well get somebody to assist by applying pressure from the outside at the exact spot you’re repairing…thanks for the great results n following instructions
The resin works. The windshield just isn't being repaired properly. You have to use a tool that attaches to the windshield from inside the vehicle. It straddles the crack with suction cups. Then there is a rod in the middle that you line up with the crack and screw in towards the windshield applying pressure directly on the crack. This spreads the crack open so that it can be filled with the resin. The resin also needs to be applied with a q-tip dipped in resin. Start at the lowest parts of the crack and slowly move it upwards. Allow the resin to be pulled into the crack before advancing the q-tip. If you start from the top and work down, the resin will just run down and over the crack leaving air pockets. When finished applying the resin, go back inside the car and relieve the pressure by unscrewing the center rod on the tool allowing the crack to come back together. This will squeeze out any excess resin. Go ahead and remove the tool or slide it along and repeat for longer cracks. Then apply the curing strips. 👍
yeah they definitely didn't read the instructions.
And then as you apply pressure from inside, the crack suddenly spreads clear across the entire windshield.
@@8307c4 lol
@@Kaodusanya In the kit there's a resin bottle, clear plastic strips and a razor. The OP is talking about a different method/device
You mean drill a hole so it doesn't spread
I think you should push the glass slighty from the inside to open up the cracks and the resin to fill the cracks up
How you can do that same time as you don’t have extra person to give a hand , yes that’s technically correct way to do so
You did that all wrong. Put your hand inside and push pressure onto the cracks as you pour the liquored on so it can fill the gap as the gap will be slightly apart by the pressure. Don't kill people's hope with a fake video just cause you can't follow instructions
Thank you so much for this tutorial. My windshield cracked and the insurance does not want to pay for it. So, I will do exactly what you are doing here. Thank you.
How to order p.ung kasing windshield namin natamaan ng bato nagcrack po.
thank you so much for your honest review , i was about buy it from aliexpress , they misleading customers because this will not remove crack as they saying
thank you again
It's actually a scam!💩 I will NEVER buy any Chinese product again. This is the second big deception that China has done to me. The first was with a so-called welding machine which was actually a soldering iron but even that was unusable! Ordinary Chinese scammers!💩🚾💩🚾
The resin wasn't applied correctly. Missing was a helper sitting inside to push against the glass to slightly open the crack on the outside of the plastic center membrane. This would have allowed the resin to flow into the crack and you would have seen it disappear. This wasn't a video showing a bad product, but a video showing improper application.
Where I can buy this?
did the crack grow further or was the repair successfull?
This kind of products only help with chipping. It cannot fix or glue cracks and no real glass repair company will claim otherwise.
It's actually a scam!💩 I will NEVER buy any Chinese product again. This is the second big deception that China has done to me. The first was with a so-called welding machine which was actually a soldering iron but even that was unusable! Ordinary Chinese scammers!💩🚾💩🚾
@@MikkoRantalainen Incorrect. Do your research, it works.
@@AZ-bx8yi Please, point to said research if you think it exists. Give the name of the researcher and the title of the publication and I'll read it.
It's a shame that improper application of the product causes viewers to blame the product rather than the persons who clearly had not clue as to what they were doing. I can't really blame them because the simple instructions supplied with this "kit" do not make it clear that the windshield needs pressure from the inside to allow the resin to fully flow inside. There are other videos that show this technique clearly and the results look like the windshield never had a crack.
BTW those little suction cup "injectors" don't open up the crack - they still the inside helper.
Can you recommend a video where it was applied well or that describes your suggestion?
Why blaming them. They basically reviewed the product . If they got money to fix or have all the tools needed to fix the window correctly, they wouldn't have to use this cheap/affordable (yes Its cheap over here) product in the first place
berapa menit mengeringkan nya boss?
5 menit
Comment faire pour en trouver à Abidjan
Cara buat xbetul..resin tu xmasok bebetul dlm rekahan tu..kne pakai suction cup utk press resin msok dlm crack tu bro
macam mana tuu
Ajar cara
if the windshield have a tint? the crack is visible on the inside than outside... is this still applicable?
Sure we cannot see the crack but the crack still there. With how hot, then sudden rain pour cold and repeat the crack may appear again😅. The only fix permanently is change windhield. I also did this for fast fix but if it become worse claim insuran
It's actually a scam!💩 I will NEVER buy any Chinese product again. This is the second big deception that China has done to me. The first was with a so-called welding machine which was actually a soldering iron but even that was unusable! Ordinary Chinese scammers!💩🚾💩🚾
Does this repair minor scratches on glass?
for scratches you need to polish it using cerium dioxide, search youtube for it you will find a lot of videos
Pe bende la yg cuba ditunjukkan ni..
Amazing 👍
All this product did was take
my money and leave a mess on my windshield.
The resin is designed to fill the crack so that the windshield retains it's sturdiness. It will never remove the actual crack.
Funny that’s no how it advertises! It’s a fraud a hoax a canard
You can repair your crack with that resin but You need more profesional tools
Share the link
Aapde mangavu hoy to kevi rite mangave
I have the same kit... it halfway worked on my hail damage crack.. I see splinters of the crack... wanted to try heat... like a heat gun... I really have nothing to lose..
SCAM CHINA!💩🚾💩
Anu po Ang hinahalo kc nd po liquid ung inorder q
The crack is a front as a iron horse
We had similar crack on our car. Still no idea how did it even happen ?😢
ถ้าจะสั่งซื้อสั่งยังไงครับ
It's actually a scam!💩 I will NEVER buy any Chinese product again. This is the second big deception that China has done to me. The first was with a so-called welding machine which was actually a soldering iron but even that was unusable! Ordinary Chinese scammers!💩🚾💩🚾
How much
I need this one how much
Resin only works on spot where you have chipping
For long crack it in middle of the glass layers and there is no way resin will reach . You can keep applying from top but nothing will happen
Actually it does work, you just need to watch the videos where they follow the correct application technique. They just squirted the resin onto the closed crack, but what they should have done was have a helper inside pressing against the windshield to force the outside crack slightly open so the micro-resin could run in. Had they done that you would have seen the crack disappear as they moved along.
লোকেশন কোথায়
기술지원을 어떻게 받나요?
Flose kit
Did nothing🤣
Got money for views atleast
Where to order this product
aliexpress, type windshield resin, then you will get it, it is very cheap and free shipping also. am from Mauritius
check the link that i sent you
I feel like a bellend, I have the exact same repair kit come today 🤦🏻♂️
It's for chips, not cracks, you bellend.
Bet you don’t feel as big a bell end as me! I ordered the kit yesterday and now watching TH-cam vids about it 🤦🏼
God, I’m such a tool 🤷🏻♂️
But it works so well on the advert.
Chinese Scam!💩🚾💩
Everyone is getting their money back.
Just use superglue with suction cup
Doesn't work with film
বাংলাদেশ এ কোথায় পাওয়া যাবে এটা?
What is it's name
Nasıl temin edebilirim
So u cant see the crack from outside? if thats the thing its a success.
Thank you bro
Esa reparación ni esta bien hecha en un 100%
Completely SCAM
क्या यह मोबाइल के टूटे हुए ग्लास में भी लगाया जा सकता है
Aslamualikum friend this kit is cut glass in the make is good
Please reply to me
Am Pakistani
It is SCAM!😡
And remember folks ! There is absolutely no truth in advertising ! This stuff is a hoax .
how much this BD Price
Chinese Scam!💩🚾💩
I got one last week and I try and try 2 time sorry don't work
Whey can I get
Don't buy this product please I have used this
Where can we buy a fix for the cracked windshield?
It's actually a scam!💩 I will NEVER buy any Chinese product again. This is the second big deception that China has done to me. The first was with a so-called welding machine which was actually a soldering iron but even that was unusable! Ordinary Chinese scammers!💩🚾💩🚾
How much po
Joke repair! This is just going to crack when you hit a speed bump
La grieta sigue exactamente igual
Can it stop my wife from speaking.
👍
Kohomada ganna maka
How much
How do I remove the resin without using the blade?
Like thisss... 😛😛😛😛😛😛😛
erre költitek a közpénzt?kemény!
This would be no good for single glazed house glass I guess ?
Entonces. Funciona o no funciona??
Lo estoy aplicando en este momento luego te digo.
@@wilsoncruz9330 ???🤔
It's actually a scam!💩 I will NEVER buy any Chinese product again. This is the second big deception that China has done to me. The first was with a so-called welding machine which was actually a soldering iron but even that was unusable! Ordinary Chinese scammers!💩🚾💩🚾
So no, it doesn’t really work.
Damn scammers!
Wow nice 😬👌
How to buy
Chinese Scam!💩🚾💩
Saann nakakabili po,,
Its all a lie, tried it and busted, its ok be replace rather to waste £12 for this crap, its a lie
Macam mana cara untuk saya mendapatkan...?
If you have insurance should cover
Vc consegue ver a trinca por que o vidro quebrado não é reparado
Tag guna, usahlh tertipu korang semua
Betul aku udh beli mahal"tapi tetap aja retak hape ku aku udh lem berkali kali
That’s crap, a cheap resin doesn’t guaranteed that the reparation last
I tried this and it didn't work. Same process. I even left the dryer sheets longer on some cracks
SCAM!💩🚾💩
Did the cracking stoped?
Same query
no cracking can not be stopped because its superficialy repairing...crack stoping andd repairing is a serious profession.
if i cant feel the crack on the windsheild so how will the resin get into the crack i dont know what to do anyone knows?
More then likely the film on the inside and outside are still intact
@@TulanePass ?? I didn’t understand
@Adrian WT will it work even if i dont feel the crack by touching it, i feel like its in the middle of the glass or something
@@craignash6621 i dont wanna get the whole windshield replaced thats why im looking for the repair kit
@Adrian WT yes but i dont actually now care about if its visible or not i just dont want it to grow more and make it stop from spreading
not work
Magkano ung Presyo repair ket windshield
Glass te Dil tut jan dubara nahi judda
How much?where I buy it?
Waste of money
It's actually a scam!💩 I will NEVER buy any Chinese product again. This is the second big deception that China has done to me. The first was with a so-called welding machine which was actually a soldering iron but even that was unusable! Ordinary Chinese scammers!💩🚾💩🚾
بكام
This is not how you use this product. Filler needs to be put in between the windshield layers either through a drill hole or the crack chip itself. Just putting this on the outside and then scraping it back off wouldn't fix anything.
What..? A drill?
Do not waste your money it don’t work
it's only like 3€ anyway and it's not made to fix this type of cracks.
Thank you for Right information ❤❤❤
i like this vidio ❤❤❤❤
Wrong technique.
Mentira eso no quita nada del cristal yo lo hice y no es verdad
That is a big crack. It would require a windshield replacement.
The windshield crack in the company’s demonstration was a lot bigger.
It just doesn’t do what they claim it does.
Brother im from Qatar can you help me to buy this
Chinese Scam!💩🚾💩 don't buy!😪
Pero nunca dicen como se llama el producto
Lo conseguís en mercado libre como kit reparacion de parabrisas
The name is Scam China product!💩🚾💩
WTF nothing change
How can buy
Chinese Scam!💩🚾💩
Woow its the same 😂
Failed chemical.
ARE YOU DRUNK ?
😂😂😂😂😂, no difference. Don’t liar the people
It's actually a scam!💩 I will NEVER buy any Chinese product again. This is the second big deception that China has done to me. The first was with a so-called welding machine which was actually a soldering iron but even that was unusable! Ordinary Chinese scammers!💩🚾💩🚾
It’s a fake doesn’t work
lem kaca retak tu barapa
200 rb bro
@@Bro.712 oiya da jual dmn
@@bonaklaran7202 beli online bro
On peut utiliser pour verre trempé
Bekerja gak bro?