3D printing and painting Chrismtas village ( with LEDs and motion sensor)
ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2024
- Time Lapse video of 3D printing and painting of Chrismtas village. Village contains LEDs in windows, train is moving and all is controlled by motion sensor (rcwl-0516)
NOTE: this 3D model is NOT my design, I downlaod it from thingiverse portal - www.thingivers...
this model didnt fit to my printer bed and printing took a lot of time, so I resized it to 75%
installed electronics:
- orange smd LEDs with 390ohm resistors
- rcwl-0516 - radar motion sensor
- micro motor with gearbox (200rpm), slowed down with 3V3 voltage regulator
- mosfet - turn on/off LEDS and train movement
- powered by 4xAA 1.5V or 5V powerbank
3D print Info:
3D printer - homemade (arduino and RAMPS based) Prusa MK2 clone
resolution - 0.2mm
material - PETG
Filament brand: Gembird
infill: approx. 15%