This has got to be one of the most informative videos I've ever seen on comparing the interior dimensions of the 3 most popular vans. Having all 3 makes compared side to side truly hits this one out of the park. The wealth of information you give in a readily accessible format will serve to cut so much trial and error out of the build process, significantly shortening construction time and enhancing build planning. You've just racked up another subscriber, Sir. Well done, and Thank You!
George, I am sure others will echo my following statement. You are one of the G.O.A.T.s for explaining your van builds and helping the community make wiser choices based on his/her chosen van platform! Thanks so much for taking the time to share your insights! Hopefully the van market will comeback to reasonable expectations in 1 to 2 years, since Sprinter dealers are now adding $10,000+ markups over MSRP for their vans especially the 4x4 sprinter vans. The current $10k markup over MSRP for just getting a dealer to put you in their order line is a hard pill to swallow right now so I will wait and live vicariously through your videos! :-) Thanks again George for taking the time to continuously produce these great insightful and entertaining videos!
The industry insiders I've been following are saying the current supply issues will be mostly resolved by summer and fully resolved by the end of 2022. Anyone who doesn't have an immediate need for a van should definitely wait at least 6 months or so before purchasing one. I could never justify paying a markup on an already overpriced vehicle, especially knowing the market will very shortly look very different.
@@dlg5485 - 9 months later and deep discounts on many models are now at hand. But are they really deep discounts? Vans were seriously overpriced…to the point of gouging…so maybe we need to wait until this winter.
@@Patrick_Ross No, not 'deep' discounts. In my opinion, it is still too soon to buy a van. Prices are stating to fall, but not nearly enough. Interest rate increases will also put downward pressure on prices, but that will take probably 6 more months to play out. The problem is, rising interest rates are making financing a lot more expensive. Those who can avoid financing will be in good shape, but prices still have a ways to fall before anything can be considered a good deal.... they'll get there though.
I strongly suggest you take the Promaster AND the Transit for a test drive. IMHO, I can't achieve a comfortable driving position in the Promaster. It's a compromise at best. The Ford is very comfortable.
George I just viewed a video tour of the new 2023 Ram Promaster and the new very tall version option which is 7’2” inside floor to ceiling height. That could be a game changer for RAM conversions which could allow for floor insulation or floor heating and in the ceiling room for massive insulation or even ducted AC/heat. That’s in addition to the 9 speed trany and the latest cab electronics.
So many people will benefit from this comparison, it’s priceless. So many things to consider when deciding which van to use for their conversion. I remember that shelf you made in your pleasure-way. Of all your builds so far, the shelf in van #1 is still my favorite . Merry Christmas to you and the Humble Road Crew🎄🎅🏼.
I would love to see an update when you get in a 2024 Dodge Ram Promaster 3500 159” Ext wheelbase with SUPERHIGH roof and compare it to the others. Great job on all your videos! Thank you for sharing your expertise!
Fantastic clear comparative: What every serious shopper wants to know! Thank you! At a glance, the key measurements of the three most popular contenders were captured in one photo per area measured, successively; and, the verbal comparisons and clarifications solved the buyer guesswork. The result is a handful of key comparatives that a buyer can rely on and mull over before making such a large purchase. Once again, thank you so much for intuiting what was necessary to understand before buying and for making the effort to relay this important information! PS: Definitely, happy to subscribe!
6:39 спасибо. 12:32 " пять лет назад Вы были" героем Выходного дня" спасибо за это выражение, говорит о том что прогресс в любом деле возможен при системном мышлении. Еще раз спасибо 🙏
I ended up changing my lifted fridge design on my Transit and moved it to 5 inches above the floor. Some bending but not too bad. It saved the aisle space that would have been lost otherwise. Isotherm 130.
This was an excellent and informative video. I have taken notes on this video and the other measurement videos. Was interested in knowing what the measurement is from the floor to the bottom of the window. They all look similar. Could you mention in a video the floor length of all the vans? I know you have done a measurement video on both lengths of the Sprinter. And I appreciate your comments on the different van sizes and ideas for use.
One other thing people need to keep in mind when choosing between the three, besides interior dimensions, is where they will be spending a lot of time. The ProMaster being front wheel drive is probably not the best option if the owner will be spending a lot of time in the mountains. Due to weight transfer, built out ProMaster's tend to have traction problems on steep hills. Trent & Allie got stuck once going up a steep winding road in south or central America as well as kept losing traction on a steep hill in NY or NJ with just a light rain. Many others have reported similar issues on forums. As to roof curvature and shower size, have you considered trying a 'hall bath' design like Roadtrek had in their Class B's? It seems like one of the best means of increasing interior space when the shower isn't in use.
Absolutely true, my Ducato based campervan once could not go uphill on a wet cobblestone road in a Hungarian town due to lack of grip on the front axle. And where I dared not go in the sand, the rear-wheel driven vans were laughing at me. Also, my front tires needed replacing every 25.000km
George I recently found a full review of your “Sam” van. I absolutely love the common sense approach you’ve takin to designing. Also it’s nice to see some details made for us “oldsters”, steps, height’s etc… I’ve been thinking about a Jeep so as to enhance my ability to get off the paved roads, I’m a landscape photographer and need subject matter beyond what’s easily accessible. Now I’m wondering if a 4WD van would work.
I bought the Borg stems for my dually before the van was even converted and I love them! Then I watched a KYD video and became paranoid about tire pressure so I bought a TPMS with screw on sensors; love them too! The Borg stems, being steel, do not flex. Borg stem grommets are thin and prone to ripping during install. Whomever installs them needs to READ THE INSTRUCTIONS before installing the stems and, they'll need an inch-pound torque wrench. Over torquing = air leak. Tip 1: Buy extra grommets from Borg; you'll need them Tip 2: Go with an internal TPMS its worth the extra upfront cost External work fine but are a hassle if air is put in or taken out (think not so humble wash-board roads). Screw-on sensors could be stolen, batteries and o-rings have to be replaced and, the two halves can separate. Tip 3: BIGGEST TIP OF ALL - Have the front tires re-aligned after conversion. My 10,500 - 11,000 lb van showed visible uneven tire wear at 14k miles which resulted in an untenable steering wobble because, per MB, factory alignment is for an empty van not one that has had 3,000 to 4,000 lbs added to it, mostly in the back. MB does not cover this wear under any warranty and cost me $354 for tire rotation and alignment. You'll pay for the alignment either way but, tire wear will be even.
What you said about the rear shower/bathroom and front futon bed setup, I’m working on right now! It’s easy to see even at a glance that you’re a master of your craft, which I can tell includes multiple by this point. Amazing editing and scripting for this type of work as well. Please keep at it as long as possible, young craftsman 😉
Excellent video, as always. One question that I've been researching, but never found an answer to, which van is the quietest when driving down the highway? When you drive hundreds of miles a day, cab noise matters. I currently have a 136 Promaster and I'm looking at replacing it with something. I like the new 2022 Promaster in that it evens the playing field with a 9 speed transmission, adaptive cruise control, 360 cameras, Apple Carplay, electronic power steering, etc.; however, I'm looking for the lowest decibels (dB) when driving and nobody seems to publish this anywhere. Thanks again for the best videos on the internet about vans, conversions, 8020 and other cool technical stuff!
My issue isn't with noise from the rear of the van, I have a carpeted bulkhead partition and floor sound deadening for that. I could have dishes breaking in the back of my van and not hear it. My issue is with engine, drivetrain and wind noise. Since you sit almost on top of the engine in a Promaster and the muffler is almost directly behind the B pillar (going widthwise) it's a noisy vehicle. I loaded an app on my phone and measured 50dB inside with the vehicle idling. At 60mph its 75dB-80dB. At 80mph it can get as high as 90dB-100dB. All coming from the engine, wind and front tires.
Thank you. That was a VERY interesting comparison between the Transit, Sprinter and Promaster. Gave me lots of food for thought on choosing my van type. Very informative.
Hello, thank you for sharing your knowledge and opinions on Class B travel. I particularly like your analytic mind, not often found in artists types! You previously mentioned your tire valve stem source for Mercedes 3500 with dual rear wheels. I had a terrible, expensive experience dealing with valve stem extensions. Never again! I recall the place was in Sunland-Tujunga, CA. I thought I wrote it down. Please repeat the source information.
This was the exact video I need to determine which van is the best van to build on measurement-wise thank you! just one measurement that was left out was the height from the floor to the horizontal pillar right where it dips into where a window would be placed. just so I know how high the platform bed would be off the floor? garage height as well lol
That measurement between the wells in dually is really the most important measurement on the dually. Basically renders it useless. You’ll never carry enough weight doing expedited for dually to matter anyways. Dually is useless imo
First and foremost I want to say that your videos are very informative, and it’s the information that is needed. Could you please share some more information about the different vans, you give the measurements on how wide, but I need the height measurements as well. Exp. From the floor to the first level you measured on the width. At the 1:10 mark on the video.
Very thorough video. Measured the entire interior of the truck yet my perplexing decision is based on the measurements between the wheel wells. Gave measurements in front and behind the wheel wells but not between. Did I overlook something??? Is this not a valid measurement?
George - thanks muchly for all your van building videos & today’s display of the trinity, and maybe to commend you on several of why you are at the top of the heap - are your rejection to burning lpg, true believer in ventilation and enabler of best practices, but still not rejecting petroleum over solar and having just branched out to gas vs. diesel. I digress since I would like your specs on the bracket set-up you figured out for the 80/20 running boards. Ours is a ‘21, 170 4x4, I am a bit getting old, so I need to fine-tune the height & the in-ness/out-ness of my foot on the step. I do remember also your un-happiness in a different company’s bracket system for attaching roof rails to 80/20 - there was a quick mention later that you had found a solution. I live with-in an 8 mins drive of good welders, but it’s the actual bracket-to-van-underside details that I need. Thanks Again & Best to You & Yours for Xmas & 2022 ...
Thank you Frazer, for such kind words. Bracket kits can be purchased and I do use them where possible. And I also made my own running boards and brackets on van #1. It can be done.
Would have loved some analysis from you. For instance: 1. Tall people, go with a Transit? 2. Easy to build out? RAM since it is boxy? 3. Most usable space? 4. Any other thoughts?
Real World Experience: I'm 6'4" tall and had a 2020 Winnebago Travato GL (bought it due to COVID and the wife wanted to "Glamp"), sold it after 90 days for MANY reasons. Prior to the Travato I had a bare bones stock 2015 Ford Transit 250 Mid Roof (rolling metal tent for my cot, lawn chair and dual sport motorcycle) and currently own a 2020 Ford Transit 250 High Roof (with Adventure Wagon interior kit and most of the "van life" luxuries...wife is still traveling with me). I've looked at MB High Roof vans (Storyteller Overland, Air Stream Interstate, etc.) at Van Expos. With that, the real world part of all this is - I can't stand up straight without tilting my head in a MB, my head rubbed the finish ceiling of the Travato and I have inches to spare standing straight up in the 2020 Ford Transit 250 High Roof (Winner). PLUS I love the twin turbo ecoboost engine that Ford offers.
@@nz4983 There's a new super tall roof option on the 2023 Promaster. It give an extra 10 inches on their high roof making it 7ft 2 inches from floor to ceiling.
Great measurement comparison video. If anybody wants a really detailed video of theExtended length Transit measurements side to side and front to back look up "The Queen and Bob" on TH-cam. I have a 2021 ford transit high roof ext length AWD. Ruled out MB because of lack of easy access to mechanics when on the road, didn't want rear drive, and didn't think I'd need 4X4. I wanted AWD since I live in a state with snowy winters and I do like a good dirt road but don't plan to rock crawl with my van. I did test drive the Promaster to make sure I didn't want it and to have something to compare the Transit to. I did not like the way it drove at all and don't think it is a high quality vehicle, but.....there are a lot of people who are happy with the Promaster. For those of you worried about the front slope, my son is 6'3 and has no problem with the slope, I've never seen him hit his head. I think George made the comment "if you hit your head more than twice then it's not a problem with the vehicle"...😂 We installed 2 fans one just behind the slope and one in the very back, I have one 340 Watt Solar panel so have more than enough flat space on the roof between the fans. I've put 9,000 miles on my van and I average 16 mpg with the Ecoboost engine, I have got as high as 18mpg, if I go 80 mph it sucks the mpg down to 13-14 but as a general rule I'm not a fan of 80mph in a big vehicle. The AWD has different settings for different road conditions. It has handled really well in heavy snow storms, on snow packed roads, thick icy slush, heavy rain, and in mud and ruts on dirt roads and that's with the factory tires, I plan to upgrade when it's time to replace current tires. It is super comfortable to drive and travel long distances, no problems with low back issues like numb leg or zingers going down leg like I get when I drive my car long distances. Front seats are close together but you get use to maneuvering around them. Ford has a lot of standard features and more great ones you can add that really help with ease of driving and parking. If you have somebody as clever and creative as George building your van you can get a configuration in any size van that will work well and be comfortable. My 6'3" son built out a Promaster city which weirdly is comfortable to drive and ride in. He and his girlfriend have a blast in it, he designed it for their needs, he uses it to get to the destination, sleep, relax in when the weather is bad outside, otherwise they are enjoying the destination, not the inside of his van. I'm really happy with my Transit and can't recommend it enough, but it provides me with what I was looking for in a travel vehicle first and gives me the space to build what I want second. I think test driving more than one brand is wise. I also think doing a lot of research on your own and figuring out exactly how you want to use the van is important and of course your budget plays a big part. Just because a van is on TH-cam or Pinterest doesn't mean it will work for you. I love that George doesn't let the "Norm" drive how he builds vans, he looks at all options, creates a bunch more of his own and can create any kind of van into a super useful space specific to the owners needs and wants, I think he takes "custom" to a new level. Looking forward to being entertained and educated through the Transit and Mini build outs!
@@sweetlifeadventure7 they must have removed all their videos. I had some saved to help with my van build and I subscribed to their channel and can't find anything. I even did a google search. They quit adding videos a while back but I didn't realize they'd removed them.
A future comparison could cover the available safety systems and typical upgrades. Thinking of standard passenger vehicle systems like stability control, emergency braking, backup camera, TPMS, etc. Also upgrades to suspension and tires if generally required. Similar to your recommended valve stem upgrade.
I highly prefer Transit's backup camera. Even if you have the cheaper version with no guide or steering lines. The Pro has awful camera quality and won't adjust exposure for seeing at night. At least in my experience so I just use my mirrors. However at night I can't really see with the mirrors either so I scout before backing up. Haven't used a Sprinter so can't say
Wow! What a detailed video! Curious if you have done any cottage looking buildouts? The wifey likes white tongue and groove and white cabs with wood tops and black hardware.
I get excited every time one of these new videos shows up in my feed Just wondering Are dimensions available from van manufacturers? If so, how do they compare to putting a tape to the actual vans? Would van after-market makers/manufacturers share their measurements? Any variations in various individual vans of same model? Has our hero, Lonesome Roads (or 1 of his minions), created CAD models for his CNC? Many Architectural product manufacturers provide DXF 2d & 3D models of their products. Do the van manufacturers as well? Just wondering
The Coachmen vans have one design which has a great rear bathroom configuration. The person in charge there listens carefully to all feedback from their customers For example, the special foam used for their mattress cushions are the best after listening to their customers' complaints. No rear garage with that design though. You know I desire rear garage area where at least one seatless HP Velotechnik Scorpion can be rolled in and out. You will eventually encounter clients who want exactly this. The highest riding trikes are the ones with 26 inch wheels. Some have 20 inch wheels all around which contributes to a lower storage profile.
I have no interest in misleading people. If handling is your concern, do not even think twice. Get the Sprinter. If you leave in Los Angeles, I can demonstrate to you the incredible safety of the Sprinter on any road.
FWD doesn't handle heavy load so well. RWD will always handle payload better. I can't speak for the Sprinter, but Transits have treated me much better on steep roads or rural roads or both
Transit roof is very thin and cannot in fact handle much weight on its roof. I believe that it was done to keep the center of gravity within acceptable norms given the fact that the base of the transit is narrower that the top. Add to this the ridiculous size of the tires, and one would easily understand that the transit is not really safe to drive beyond a certain point. I tried the mid roof transit cargo van. Not saying it is a bad van. But it is not for me and I can drive vans like no one else does, without bragging about it.
One of the helpful things in the Sprinter vs Promaster video was the comparison of running electrical, and how the Promaster has unobstructed runs whereas the Sprinter has blockages that presumably must be drllled through. But how about the Transit? Is it easy to run wires and things?
what is the height of the cargo beds as measured from the ground? do you know of any tradeoffs one would have to make if a braun under van lift was needed? e.g. water tanks couldn't be installed under the van etc
Uni-strut kits are in your future. Standardization of structural members will increase your production. Reliable templates are increasing in numbers. Bamboo products are in your future too.
which of the two (Transit vs. Promaster) non-extended vans gives you the most length to build inside the cargo space. Assuming that you go with the longer wheelbase.
That's fantastic! But since each of these models comes in 3 different lengths and 2-3 optional heights, it would be good to a. state which model exactly are we measuring, b. try as much as possible to compare apples to apples. for example, lets take from all 3 makers, the long wheel base, high roof. And lastly, as you are the absolute expert in this: Which one is your favorite? And which one you think should be the choice for a DIY'er who's not an expert?
Yes, each of these vans was the longest and the tallest and the most heavy duty in their classes. I have a favorite based on my expectations and my intentions for vanlife. I cannot answer that question unless I have all of the individual information for each individual caring to hear the answer. In other words, each DIYer needs to assess their own expectations and wants needs, and must haves in order to arrive at a decision as to which Van platform is best for them.
Please.. do you know what is the hickness of the sheets steel use on the floor and roof of this this vans ? Gauge.. mm.. any info would be great.. thank you in advance
Front shower, drain pan in a toe kick that centers over a plugable drain. Parachute curtain stored in the front shelve bar. Whole thing over a max fan, or even shower with the slider open.
@@HumbleRoad you don’t build for old people you build for adventurous people who have aged gracefully enough to afford your services. 😉 In the back relocate the spare tire in the sprinter. Drop in a box with plumbing, and the drain pan. A better travato K. If you need semi fixed structure for a front option then isn’t it time for a wall in front build? No peeping eyes through the cab, much safer in an accident, better temp retention, lots of flexibility and you can still have a pass through. Happy new year, thanks for all the content!
I am interested in the Winnebago EKKO, on the Ford Transit cutaway platform. It has MAYBE a 7" road clearance, not a whole lot. Recently, I saw a Sprinter dueli (spelling?) extended length van and it seemed to have much more road clearance...9" perhaps? Maybe one day you can talk about road clearance and some tricks to perhaps increase road clearance, especially on both Transit and Promaster...if such is possible Thanks for your great videos!
Raising/suspension mods for something like this are a whole different ballgame. Too much cost/risk/small of market for anything but a few to be toying with. Check out the Chevy/quigley conversion sector guys, since the overheads are lower and more out there, more people have played with modifying the suspensions/outcomes and found what to pay most attention to. I’ve seen some of them clear 5 gallon buckets (a lot more than 7 or 9”). You better have money to straight Burn though.
@@chriscunanan Thanks very much for your valuable input...and yes, the $$$ can add up quickly, and if things aren't done "right" it could be quite expensive to try to fix 'right'. Jim at "The Fit RV" (he's an engineer by trade) did the VB air suspension on his new EKKO...maybe gained 1" in road clearance, (and ditched his spare tire) but more than that, he stated that when he got his EKKO, he began doing a number of things (including adding FIVE lithium batteries), changing his propane's stove's position and exchanging it for induction, and putting the sink where the stove was) which added to the overall weight (5 Li+ batteries - whoa!) and that stressed the factory springs. Jim stated that the air suspension improved the ride significantly; that the vehicle's stability and bump/rough road handling improved dramatically, but on his blog, he also stated that 99.9% of the driving was paved highway, which I kind of doubt it's that much, but perhaps he said it as a disclaimer. At the Overland West show this past September in Arizona, I met with the Quigley folks and they said a 1-1.5 inch lift was reasonable, but more likely accomplished by simply buying tires with a larger radius, and making sure they fit the wheel wells. Quigley folks also said Ford Transits don't do well with anything approaching even a two-inch lift, so "be careful". On a side note, they told me that a true 4WD is superior to AWD, but I still don't know the reason except perhaps if one wheel is freed off the surface, it might spin uselessly in AWD whereas in a 4WD, the power to that uselessly spinning wheel would instantly be transferred to a gripping wheel on the ground. ANYHOW...with 6.5 to 7 inches of (factory) road clearance, that's not a whole lot so the EKKO is only safe on relatively smooth gravel roads but certainly would be at risk on rough, rutted roads with larger rocks protruding, or sudden "aggressive/challenging" surface transitions where the (fore/aft) center of the vehicle could be damaged, and that could prove absurdly expensive if towing is needed (ugh). I don't want to go where Jeeps and ATVs go, obviously, and I'd like to get a bit off the beaten path on "relatively smooth ever-so-slightly rough unpaved roads". The Sprinter van chassis with dual rear wheels seems attractive (9" clearance), but Winnebago only builds the EKKO on the Ford transit cutaway, with the little wheels to keep the bed low for the largess of Ford transit customers...van delivery folks. I also heard that the Sprinter chassis is quite a bit more $$ than the Ford Transit, and that it rides "better", but if repairs out of warranty are needed, the Sprinter could cost a veritable fortune. Again, Chris, thanks and be safe and well!
Just started getting serious on my plans to do a van build and was torn between the Promaster and the Transit. This is something I couldn't find anywhere else even on manufacturers website. Super enlightening video and helped make my decision 1000 times easier thank you so much.
@@lucydoyle9010 I had decided that the Transit was going to work best for me until I went to the dealership and learned they were sold out for everything they were making up until 2023
This is soooo helpful! We have a new Sprinter 3500XD and we are ordering the Borg Dually Valves now. Question about the tire pressure monitoring system - you mentioned adding the sensors inside the valve... I've never heard of that as an option. Do you have a recommendation/link? We really want to have the ability to monitor tire pressures, having experienced some blowouts in our RV quite a few times! Thank you! Love your videos!!
@@jodymooney255 Yes it does! I think that's what we will do as well, much safer to have them installed inside. I guess with this setup - Borg Dually Valves and inside sensors, it'd be hard to rotate the tires... Well maybe that's not necessary.
Wait. You’ve got a Pleasure Way? I need to know more. Which one? Only one? Do you also have your own carom build? And…if you choose a small van (18’ or less%) for a build, what would be your pick?
You are so right about the Borg dually valves on the Sprinter 3500! We had ours done when we lived in Vegas and drove our Sprinter to the shop in California for installation - excellent! It seems the Promaster is the dimensional winner, except in ceiling height. Further notes on the Sprinter 3500: Don't know if this still true on the newer models but our 2012 has had lots of mechanical problems. In the 4-2/3 years that we've owned ours we have spent over $13,000 on maintenance and repairs (long list of repairs). This is in addition to the $4,400 repair job on the DEF system that Mercedes-Benz comped us because of a recall. Wheel sensors are also an expensive issue we haven't had, although many of our Sprinter friends have. This is all despite the higher MSRP of the Sprinter. All of these repairs have put us off of diesels for the future, as well.
it is true that the 2010-2012 or so sprinter had problems with the emissions. This is why Mercedes settled and is paying back sprinter owners about 3600 dollars to fix the problem and added a full 4 years 48k miles warranty. Beside that, still have 3 sprinters post 2015 and 2019, never had a problem.
@@christiankamal7549 Yes, we are waiting for our settlement check, and we are happy that MB paid for the additional $4,400 bill for the DEF heater which totals $8,000 in direct dollar aid, but we still did have another $13k in chassis expenses and we are cringing at the thought of the wheel sensors going out. Glad to hear that you haven't had issues since the 2015 models.
So as far as the frig cabinet goes for the Transit it would be better to go with one of those side by side frig/freezer combo so you could set it back against the wall more and give you 3-4" of more isle space? So what would be the usable square footage for each van comparison? And if your doing a solar system could it be feasible to mount the big Marmaluke batteries under the floor behind the rear wheels (one on each side) to free up garage space and give you a better weight center of gravity? I mean semi's have outside battery boxes and go into freezing temperatures. Just wondering if the space is available in that location?
I try to put as few components under the van or on top of the van as possible. The extra square footage gained is offset by the exposure and access issues down the road.
The science of temporary thermal window covers are something to watch. A narrow deep shelf over the cab is a good spot to store them or something else could be designed.
@@HumbleRoad - slightly over sized spongy thermal pads can be forced into the window openings while sleeping and for overall warmth. The pads can have a thin sheet of reflective material on both sides. The outer edge is all that needs to be over sized and spongy for a tight fit around the edges. Small magnets can be recessed in two places at the top, bottom, and sides if necessary. and the inner foam pad can be of a stiffer kind. A thin coating of something can cover the recessed magnets to prevent scratching.
Ford just said my 2022 Transit 350HD High Roof Ext Dually is scheduled to be started on 17 January. I'm grateful for the timing of you guys getting two Transits in : ) Really looking forward to see what you'll do with that cable pack running down the driver's side inside the living space. Press on friend... : ) appreciate your company's work.
Ive been trying to figure out transit optioning, but find it confusing. What is the wheelbase length of a 350 extended? It seems like cargo vans have 158 Long and 178 Extended but crew cans are 148 WB. I cant figure out how all these items are differentiated. Do you know?
@@jturbo68 Hello jturbo68 , the wheelbase is still 148" on even the extended models of the cargo and the crew versions. Happy to answer any other questions : )
I recently used both Promasters and Transits delivering packages in a large metro area at 5,000 elevation in all weather conditions; ~80 miles a day, 150 starts a day, side door openings etc .... During a 12 month period we had to replace every single battery, every single key fob on the Transits. When a driver would report their van had stalled and was unable to restart we knew it was a Transit. We thought it may be the design specs of the power system coupled with the position of the battery outside of the engine bay heat and closer to the ground under the driver seat. The Transit is also higher from ground to driver seat, making it quite a leap for shorter drivers. We NEVER had a power problem with the ProMasters, and as you well know, you don't need a drive train if you don't have power.
Sad to hear but I have spoken with mechanics who tell me the sprinter costs a fortune so dont go there. Promasters have Russian-roulette transmissions and other mechanical defects that make them horrible for the long run. They all said transit was most reliable mechanically. Hearing what you experienced makes me think I should wait for a Tesla van... :(. Probably 5 years out... Do you think your experience had to do with the elevation ?
@@LJ-jq8og - true on the Sprinters, others in our sector have them and they hated them! On the Fords - I love the Ford, always had at least one Ford in my personal garage. My perception of the Transit 250 is that the ignition and electrical system are not adequately designed for small parcel cargo delivery at a rate of 100-plus key turns per day, 360/365. I had ten Transits in my fleet and every key snapped off the fob, and every battery had to be replaced. The fob failure may be related to the steering / ignition lock on the Ford and the Battery failure may be related to its position under the driver seat, closer to the cold, out of the warmth of the engine bay. They are also on the fat / tall side and have way more problems under carports, low-hanging trees with inexperienced drivers. On the Promaster - they are well-built, drivers love them and none of the teams that had them noted transmission issues - although it must be said that all of our vans were trashed by the time they got to 100,000 miles ... the only vans of the three that showed transmission issues at low mileage were the Sprinters. Now - don't get me started on step vans!
The Promasters all have the same 3.6 Pentastar Engine and 62TE Automatic Tranny (Front Wheel Drive). It’s the same as the 5th Generation Dodge Grand Caravan/Chrysler Town and Country/VW Routan.
@@williambotha5864 Hysterical about the sprinters, I was IN LOVE with them until I spoke to owners at gas stations and was in shock at their headaches and hassles. $$$$. Even getting service was a pain in the ass as only certain locations were "sprinter qualified" and then they treated individual owners poorly too. TH-cam/instagram are so misleading as to the truth. My only hope is that with the transit if I am not using/treating it too harshly then likely to last longer--common sense I guess. From your post it sounds as though step-vans are even worse. My other take away from your helpful insights is that I will never buy a used van unless I know its true history. Think how many people buy used vans from parcel-delivery services not realizing that van designs are in essence "disposable" after being run hard for a year.
Baltic Birch has always been great for making drawer bodies and for panels. Alex knows this already. It was only available in 5 X 5 sheets. But bamboo plywood and dimensioned lumber are two things coming on strong.
Would be nice to see a cost comparison. I like that the transit comes in AWD, and I think Sprinters as well, but seeing how the pro master is a front wheel drive there is no 4 wheel drive option. I know on the transit it's less than 4000 to upgrade, which is pretty nice for a four wheel drive. I come from a northern climate so I really like to have 4-wheel drive. Ground clearance would be another nice thing to know about, but typically 4 four-wheel drives have greater clearance than two-wheel drives. If you look at some older things like the road trek 210s they are horrible in this regard and people spend a small fortune putting lifts on them. Get yourself a long wheelbase with low ground clearance and you can do some damage with high centering. I think this is an important issue. And in watching TH-cam videos from Van Lifers it seems like the Pro Masters break down for more often than some of the others. I would not own a sprinter with the emissions crap. Super expensive to repair and maintain.
Can someone tell me if a Thor Motor Coach (Ram Promaster chassis) will get me from Alaska to Tierra del Fuego without leaving me stranded or with a fully depreciated mess? I have looked at the Revel on-line and it seems like I could get more for the same money elsewhere. I can afford a custom built 4x4 diesel Sprinter, but I am low on patience. I would go through the process if someone tells me its necessary. Thank you!
It's worth noting (as someone with extensive dually experience) that if you intend to drive dirt roads with any frequency, rocks can get stuck between the wheels and destroy two tires in no time at all. Your spare will still get you to a service center when this happens, but you'll be on the hook for 2 new tires at the very least. Ford sells it's 3500 with a "super single" option which is the way to go IMO
@@HumbleRoad I think it's part of a greater discussion about whether any van is suitable for your intended use. If you're regularly on less-improved roads, certainly clearance will be a factor as well. The Transit AWD is lifted somewhat, but the long WB version that is so popular has a very long overhang that gives it a not-great departure clearance. I'm not talking "rock crawling" at all.... just the ability to head out on a sandy rutted and rock strewn road to some of the more secluded BLM sites in the west, or even Baja Mexico. I'm a big fan of the biggest dually Transit -- which I use at work, but I'm saddened that it wouldn't be the best to take me where I want to go unless I maybe mounted skid plates and a front/rear winch. It's a great vehicle otherwise, and if you have mostly improved road dreams, I think it's the best of the bunch.
Really great basic dimension comparison. I too am considering buy vs build option. I would think the manufacturers would just publish a 3D model for all to use. I can only imagine they can't guarantee accuracy of their builds or they make too many variations over time. A simple tool for users to make basic space planning would be great and could be a real sales booster.
@@HumbleRoad great suggestion. I would like to trial a scaled-down German layout with folding twin beds. The desire is dedicated beds that enables equal bed egress for a couple. Raised Chaise lounge or Murphy style that overlaps countertops or dinette seating in sleep mode.
Really makes more sense over purchasing a new vehicle and having it depreciate for an extended time working out the design and sourcing components. In my past work life I have worked with several designers (interior design) that were very proficient with Sketchup but my experience is limited to 2D Visio and schematic drawings. My past attempts with Sketchup have been failures. I really need to revisit this. Would like to have a Transit model to start with. Ideally I would like modular component approach that would allow removal and replacement relatively easily for service and upgrading.
thank for being the first person to get reliable measurements from!
This has got to be one of the most informative videos I've ever seen on comparing the interior dimensions of the 3 most popular vans. Having all 3 makes compared side to side truly hits this one out of the park. The wealth of information you give in a readily accessible format will serve to cut so much trial and error out of the build process, significantly shortening construction time and enhancing build planning. You've just racked up another subscriber, Sir. Well done, and Thank You!
Thank you Cletus. Welcome to Humble Road! 👍
There is no one like you in ‘van life’ builds. You are the best. Period! Thank u.
Wow, thank you!
George, I am sure others will echo my following statement. You are one of the G.O.A.T.s for explaining your van builds and helping the community make wiser choices based on his/her chosen van platform! Thanks so much for taking the time to share your insights! Hopefully the van market will comeback to reasonable expectations in 1 to 2 years, since Sprinter dealers are now adding $10,000+ markups over MSRP for their vans especially the 4x4 sprinter vans. The current $10k markup over MSRP for just getting a dealer to put you in their order line is a hard pill to swallow right now so I will wait and live vicariously through your videos! :-) Thanks again George for taking the time to continuously produce these great insightful and entertaining videos!
The industry insiders I've been following are saying the current supply issues will be mostly resolved by summer and fully resolved by the end of 2022. Anyone who doesn't have an immediate need for a van should definitely wait at least 6 months or so before purchasing one. I could never justify paying a markup on an already overpriced vehicle, especially knowing the market will very shortly look very different.
George, you are an unexpected genius. I think I’m in love with you. Thank you for your high standards.
I agree! George you are the goat. Excellent builds.
@@dlg5485 - 9 months later and deep discounts on many models are now at hand. But are they really deep discounts? Vans were seriously overpriced…to the point of gouging…so maybe we need to wait until this winter.
@@Patrick_Ross No, not 'deep' discounts. In my opinion, it is still too soon to buy a van. Prices are stating to fall, but not nearly enough. Interest rate increases will also put downward pressure on prices, but that will take probably 6 more months to play out. The problem is, rising interest rates are making financing a lot more expensive. Those who can avoid financing will be in good shape, but prices still have a ways to fall before anything can be considered a good deal.... they'll get there though.
Your advice is for vans way larger than I will ever own. I just love watching you.
This is the first time in my life I'm grateful to be a short person. It's going to make van life easier. The Promaster is my choice.
I strongly suggest you take the Promaster AND the Transit for a test drive. IMHO, I can't achieve a comfortable driving position in the Promaster. It's a compromise at best. The Ford is very comfortable.
Sharon I agree! 🤣😂
Yea...sorry...would never buy a Promaster.
@@MrsFelecia14 I can say I drove a Ford extended and I felt confortable driving it in snow So It is my top choice but I don't need it soo big LOL
@@MrsFelecia14 why not?
I learned about all different size between 3 vans. It was very helpful and useful. Thank you.
George I just viewed a video tour of the new 2023 Ram Promaster and the new very tall version option which is 7’2” inside floor to ceiling height. That could be a game changer for RAM conversions which could allow for floor insulation or floor heating and in the ceiling room for massive insulation or even ducted AC/heat. That’s in addition to the 9 speed trany and the latest cab electronics.
YES! Very excited!
Best practical information comparing the three - and the best music of any van video.
So many people will benefit from this comparison, it’s priceless. So many things to consider when deciding which van to use for their conversion. I remember that shelf you made in your pleasure-way. Of all your builds so far, the shelf in van #1 is still my favorite . Merry Christmas to you and the Humble Road Crew🎄🎅🏼.
Merry Christmas to you as well, Maitilda! ❤️
The perfect video I was wishing to find. A vide added to my list to watch it again. Thank you so much.
Nice job again George on the comparisons. Those roof supports are known as "roof bows".
You look cozy in
your red jamas.
Thanks for the info.
Good Morning George
Having My Sunday Morning Coffee and Enjoying A Humble Road Video . Thanks !!👍
And I with my Vitamix shake, LOVE the Sunday morning ritual of responding to all the comments!
I would love to see an update when you get in a 2024 Dodge Ram Promaster 3500 159” Ext wheelbase with SUPERHIGH roof and compare it to the others. Great job on all your videos! Thank you for sharing your expertise!
Noted!
Fantastic clear comparative: What every serious shopper wants to know! Thank you!
At a glance, the key measurements of the three most popular contenders were captured in one photo per area measured, successively; and, the verbal comparisons and clarifications solved the buyer guesswork. The result is a handful of key comparatives that a buyer can rely on and mull over before making such a large purchase.
Once again, thank you so much for intuiting what was necessary to understand before buying and for making the effort to relay this important information!
PS: Definitely, happy to subscribe!
Glad it was helpful! And welcome to Humble Road!
6:39 спасибо. 12:32 " пять лет назад Вы были" героем Выходного дня" спасибо за это выражение, говорит о том что прогресс в любом деле возможен при системном мышлении. Еще раз спасибо 🙏
I ended up changing my lifted fridge design on my Transit and moved it to 5 inches above the floor. Some bending but not too bad. It saved the aisle space that would have been lost otherwise. Isotherm 130.
This was an excellent and informative video. I have taken notes on this video and the other measurement videos. Was interested in knowing what the measurement is from the floor to the bottom of the window. They all look similar.
Could you mention in a video the floor length of all the vans? I know you have done a measurement video on both lengths of the Sprinter. And I appreciate your comments on the different van sizes and ideas for use.
Glad it was helpful!
One other thing people need to keep in mind when choosing between the three, besides interior dimensions, is where they will be spending a lot of time. The ProMaster being front wheel drive is probably not the best option if the owner will be spending a lot of time in the mountains. Due to weight transfer, built out ProMaster's tend to have traction problems on steep hills. Trent & Allie got stuck once going up a steep winding road in south or central America as well as kept losing traction on a steep hill in NY or NJ with just a light rain. Many others have reported similar issues on forums.
As to roof curvature and shower size, have you considered trying a 'hall bath' design like Roadtrek had in their Class B's? It seems like one of the best means of increasing interior space when the shower isn't in use.
Absolutely true, my Ducato based campervan once could not go uphill on a wet cobblestone road in a Hungarian town due to lack of grip on the front axle. And where I dared not go in the sand, the rear-wheel driven vans were laughing at me.
Also, my front tires needed replacing every 25.000km
I am so grateful to you for this video. I now know what I want. Huge step for me!
George I recently found a full review of your “Sam” van. I absolutely love the common sense approach you’ve takin to designing. Also it’s nice to see some details made for us “oldsters”, steps, height’s etc…
I’ve been thinking about a Jeep so as to enhance my ability to get off the paved roads, I’m a landscape photographer and need subject matter beyond what’s easily accessible. Now I’m wondering if a 4WD van would work.
Great comparison !! We love our transit coachman beyond! We sleep East to west but I’m only 5’6 . 👍
I bought the Borg stems for my dually before the van was even converted and I love them! Then I watched a KYD video and became paranoid about tire pressure so I bought a TPMS with screw on sensors; love them too!
The Borg stems, being steel, do not flex. Borg stem grommets are thin and prone to ripping during install. Whomever installs them needs to READ THE INSTRUCTIONS before installing the stems and, they'll need an inch-pound torque wrench. Over torquing = air leak.
Tip 1: Buy extra grommets from Borg; you'll need them
Tip 2: Go with an internal TPMS its worth the extra upfront cost
External work fine but are a hassle if air is put in or taken out (think not so humble wash-board roads). Screw-on sensors could be stolen, batteries and o-rings have to be replaced and, the two halves can separate.
Tip 3: BIGGEST TIP OF ALL - Have the front tires re-aligned after conversion.
My 10,500 - 11,000 lb van showed visible uneven tire wear at 14k miles which resulted in an untenable steering wobble because, per MB, factory alignment is for an empty van not one that has had 3,000 to 4,000 lbs added to it, mostly in the back. MB does not cover this wear under any warranty and cost me $354 for tire rotation and alignment. You'll pay for the alignment either way but, tire wear will be even.
Really good to know!!!
this is the video I have been waiting for. Thank you!
What you said about the rear shower/bathroom and front futon bed setup, I’m working on right now! It’s easy to see even at a glance that you’re a master of your craft, which I can tell includes multiple by this point. Amazing editing and scripting for this type of work as well. Please keep at it as long as possible, young craftsman 😉
Thank you Chris!
The 2023 Promaster finally stepped up the tech. My 2014 is jealous.
im 6ft 4in and measurementz of these 3 rigz iz exactlty what i wanted to do thx for saving me the run around
At 5'16" tall the Transit is the only option.
As always a great video and very informative.
Always a thumbs up 👍
Thanks J.G. 👍
I'm 5'18" and looking at the Transit too. I think my head will give the ceiling a nice dusting.
"5'16" 😂😂. Nice. Gave me a good laugh
Excellent video, as always. One question that I've been researching, but never found an answer to, which van is the quietest when driving down the highway? When you drive hundreds of miles a day, cab noise matters. I currently have a 136 Promaster and I'm looking at replacing it with something. I like the new 2022 Promaster in that it evens the playing field with a 9 speed transmission, adaptive cruise control, 360 cameras, Apple Carplay, electronic power steering, etc.; however, I'm looking for the lowest decibels (dB) when driving and nobody seems to publish this anywhere. Thanks again for the best videos on the internet about vans, conversions, 8020 and other cool technical stuff!
road noise can be addressed to a degree in the build process with sound dampening and insulation.
Yes, there are some excellent sound deadening materials to minimize road noise.
My issue isn't with noise from the rear of the van, I have a carpeted bulkhead partition and floor sound deadening for that. I could have dishes breaking in the back of my van and not hear it. My issue is with engine, drivetrain and wind noise. Since you sit almost on top of the engine in a Promaster and the muffler is almost directly behind the B pillar (going widthwise) it's a noisy vehicle. I loaded an app on my phone and measured 50dB inside with the vehicle idling. At 60mph its 75dB-80dB. At 80mph it can get as high as 90dB-100dB. All coming from the engine, wind and front tires.
Tire choice can make a big difference too. Tires that are good in snow and mud have to be noisier I suppose.
Thanks for this. It's very helpful.
Thank you for doing this video.. very useful!!! 🙏
Glad it was helpful!
Thank you. That was a VERY interesting comparison between the Transit, Sprinter and Promaster. Gave me lots of food for thought on choosing my van type. Very informative.
Good luck! 👍
Hello, thank you for sharing your knowledge and opinions on Class B travel. I particularly like your analytic mind, not often found in artists types! You previously mentioned your tire valve stem source for Mercedes 3500 with dual rear wheels. I had a terrible, expensive experience dealing with valve stem extensions. Never again! I recall the place was in Sunland-Tujunga, CA. I thought I wrote it down. Please repeat the source information.
Search: Borg tire valves
This was the exact video I need to determine which van is the best van to build on measurement-wise thank you! just one measurement that was left out was the height from the floor to the horizontal pillar right where it dips into where a window would be placed. just so I know how high the platform bed would be off the floor? garage height as well lol
In my two cardboard builds (250 and a350) I left a 33" clearance under the garage for bicycles and sliding trays.
@@HumbleRoad awesome thank you
The measurement I'm interested in is between tire wells. Does a full sheet of plywood fit between them?
Dually is not good for pallets. Pallets won’t fit between the wells. There is not enough room between the wells compared to well on just 4 tires
That measurement between the wells in dually is really the most important measurement on the dually. Basically renders it useless. You’ll never carry enough weight doing expedited for dually to matter anyways. Dually is useless imo
Loved this video, searching for cargo custom
First and foremost I want to say that your videos are very informative, and it’s the information that is needed. Could you please share some more information about the different vans, you give the measurements on how wide, but I need the height measurements as well. Exp. From the floor to the first level you measured on the width. At the 1:10 mark on the video.
How high are the windows and tall are the windows as well
Well done George. You’re a class act.
Very thorough video. Measured the entire interior of the truck yet my perplexing decision is based on the measurements between the wheel wells. Gave measurements in front and behind the wheel wells but not between. Did I overlook something??? Is this not a valid measurement?
What an excellent video. Thanks.
Glad you liked it!
George - thanks muchly for all your van building videos & today’s display of the trinity, and maybe to commend you on several of why you are at the top of the heap - are your rejection to burning lpg, true believer in ventilation and enabler of best practices, but still not rejecting petroleum over solar and having just branched out to gas vs. diesel.
I digress since I would like your specs on the bracket set-up you figured out for the 80/20 running boards. Ours is a ‘21, 170 4x4, I am a bit getting old, so I need to fine-tune the height & the in-ness/out-ness of my foot on the step. I do remember also your un-happiness in a different company’s bracket system for attaching roof rails to 80/20 - there was a quick mention later that you had found a solution. I live with-in an 8 mins drive of good welders, but it’s the actual bracket-to-van-underside details that I need.
Thanks Again & Best to You & Yours for Xmas & 2022 ...
Thank you Frazer, for such kind words. Bracket kits can be purchased and I do use them where possible. And I also made my own running boards and brackets on van #1. It can be done.
Would have loved some analysis from you. For instance:
1. Tall people, go with a Transit?
2. Easy to build out? RAM since it is boxy?
3. Most usable space?
4. Any other thoughts?
I’ve done that sort of editorial in past videos. Random thoughts pertaining to the job at hand.
Real World Experience: I'm 6'4" tall and had a 2020 Winnebago Travato GL (bought it due to COVID and the wife wanted to "Glamp"), sold it after 90 days for MANY reasons. Prior to the Travato I had a bare bones stock 2015 Ford Transit 250 Mid Roof (rolling metal tent for my cot, lawn chair and dual sport motorcycle) and currently own a 2020 Ford Transit 250 High Roof (with Adventure Wagon interior kit and most of the "van life" luxuries...wife is still traveling with me). I've looked at MB High Roof vans (Storyteller Overland, Air Stream Interstate, etc.) at Van Expos. With that, the real world part of all this is - I can't stand up straight without tilting my head in a MB, my head rubbed the finish ceiling of the Travato and I have inches to spare standing straight up in the 2020 Ford Transit 250 High Roof (Winner). PLUS I love the twin turbo ecoboost engine that Ford offers.
@@nz4983 There's a new super tall roof option on the 2023 Promaster. It give an extra 10 inches on their high roof making it 7ft 2 inches from floor to ceiling.
If the Promaster only had a reliable second alternator option, it would be perfect, especially with 2022 changes.
Someone surely makes an aftermarket option for this right?
@@MiniatureChickenChannel sure, but they have the reputation of tearing radiator hoses.
More Transit stuff please!
I love that cardboard walk threw strategy you have
Great measurement comparison video. If anybody wants a really detailed video of theExtended length Transit measurements side to side and front to back look up "The Queen and Bob" on TH-cam.
I have a 2021 ford transit high roof ext length AWD. Ruled out MB because of lack of easy access to mechanics when on the road, didn't want rear drive, and didn't think I'd need 4X4. I wanted AWD since I live in a state with snowy winters and I do like a good dirt road but don't plan to rock crawl with my van. I did test drive the Promaster to make sure I didn't want it and to have something to compare the Transit to. I did not like the way it drove at all and don't think it is a high quality vehicle, but.....there are a lot of people who are happy with the Promaster. For those of you worried about the front slope, my son is 6'3 and has no problem with the slope, I've never seen him hit his head. I think George made the comment "if you hit your head more than twice then it's not a problem with the vehicle"...😂 We installed 2 fans one just behind the slope and one in the very back, I have one 340 Watt Solar panel so have more than enough flat space on the roof between the fans. I've put 9,000 miles on my van and I average 16 mpg with the Ecoboost engine, I have got as high as 18mpg, if I go 80 mph it sucks the mpg down to 13-14 but as a general rule I'm not a fan of 80mph in a big vehicle. The AWD has different settings for different road conditions. It has handled really well in heavy snow storms, on snow packed roads, thick icy slush, heavy rain, and in mud and ruts on dirt roads and that's with the factory tires, I plan to upgrade when it's time to replace current tires. It is super comfortable to drive and travel long distances, no problems with low back issues like numb leg or zingers going down leg like I get when I drive my car long distances. Front seats are close together but you get use to maneuvering around them. Ford has a lot of standard features and more great ones you can add that really help with ease of driving and parking. If you have somebody as clever and creative as George building your van you can get a configuration in any size van that will work well and be comfortable. My 6'3" son built out a Promaster city which weirdly is comfortable to drive and ride in. He and his girlfriend have a blast in it, he designed it for their needs, he uses it to get to the destination, sleep, relax in when the weather is bad outside, otherwise they are enjoying the destination, not the inside of his van. I'm really happy with my Transit and can't recommend it enough, but it provides me with what I was looking for in a travel vehicle first and gives me the space to build what I want second. I think test driving more than one brand is wise. I also think doing a lot of research on your own and figuring out exactly how you want to use the van is important and of course your budget plays a big part. Just because a van is on TH-cam or Pinterest doesn't mean it will work for you. I love that George doesn't let the "Norm" drive how he builds vans, he looks at all options, creates a bunch more of his own and can create any kind of van into a super useful space specific to the owners needs and wants, I think he takes "custom" to a new level. Looking forward to being entertained and educated through the Transit and Mini build outs!
Cheryl do you have a link to "The Queen and Bob"? I'm not finding them.
@@sweetlifeadventure7 they must have removed all their videos. I had some saved to help with my van build and I subscribed to their channel and can't find anything. I even did a google search. They quit adding videos a while back but I didn't realize they'd removed them.
A future comparison could cover the available safety systems and typical upgrades. Thinking of standard passenger vehicle systems like stability control, emergency braking, backup camera, TPMS, etc. Also upgrades to suspension and tires if generally required. Similar to your recommended valve stem upgrade.
I highly prefer Transit's backup camera. Even if you have the cheaper version with no guide or steering lines. The Pro has awful camera quality and won't adjust exposure for seeing at night. At least in my experience so I just use my mirrors. However at night I can't really see with the mirrors either so I scout before backing up. Haven't used a Sprinter so can't say
Curvature in the body sides are referred to as "tumble home". These are the terms we use in body design.
Wow! What a detailed video! Curious if you have done any cottage looking buildouts? The wifey likes white tongue and groove and white cabs with wood tops and black hardware.
Another fantastic comparison video. Thank you.
I get excited every time one of these new videos shows up in my feed
Just wondering
Are dimensions available from van manufacturers?
If so, how do they compare to putting a tape to the actual vans?
Would van after-market makers/manufacturers share their measurements?
Any variations in various individual vans of same model?
Has our hero, Lonesome Roads (or 1 of his minions), created CAD models for his CNC?
Many Architectural product manufacturers provide DXF 2d & 3D models of their products. Do the van manufacturers as well?
Just wondering
👌👌👌Ford Transit Van-Free AutoCAD Block AUTOCAD DWG BLOCK COLLECTION
Now this must be the new best van (dimensions) comparison video on TH-cam.
More to come as I get into the build.
The Coachmen vans have one design which has a great rear bathroom configuration.
The person in charge there listens carefully to all feedback from their customers
For example, the special foam used for their mattress cushions are the best after listening to their customers' complaints.
No rear garage with that design though. You know I desire rear garage area where at least one seatless HP Velotechnik Scorpion can be rolled in and out. You will eventually encounter clients who want exactly this. The highest riding trikes are the ones with 26 inch wheels. Some have 20 inch wheels all around which contributes to a lower storage profile.
💯 Nice work George.....this will save people TONS of time while deciding which one to pursue! Stay awesome, Merry Christmas.
great comparison!
Very informative video! Thank you
Glad it was helpful!
How about which one drives and handles load capacity better? I've heard that ProMaster struggles with driving uphill? Thanks and quite helpful video!
I have no interest in misleading people. If handling is your concern, do not even think twice. Get the Sprinter. If you leave in Los Angeles, I can demonstrate to you the incredible safety of the Sprinter on any road.
FWD doesn't handle heavy load so well. RWD will always handle payload better. I can't speak for the Sprinter, but Transits have treated me much better on steep roads or rural roads or both
Transit roof is very thin and cannot in fact handle much weight on its roof. I believe that it was done to keep the center of gravity within acceptable norms given the fact that the base of the transit is narrower that the top. Add to this the ridiculous size of the tires, and one would easily understand that the transit is not really safe to drive beyond a certain point. I tried the mid roof transit cargo van. Not saying it is a bad van. But it is not for me and I can drive vans like no one else does, without bragging about it.
@@christiankamal7549 I'm a courier so all my payload is kept on the floor. However. I will be keeping this in mind for a project van
@@bengreene9072 i will try to find n the specs. But it was significantly gone than by the sprinter and pro. Master
One of the helpful things in the Sprinter vs Promaster video was the comparison of running electrical, and how the Promaster has unobstructed runs whereas the Sprinter has blockages that presumably must be drllled through. But how about the Transit? Is it easy to run wires and things?
Look for my more recent video on the Transit as it compares-
what is the height of the cargo beds as measured from the ground? do you know of any tradeoffs one would have to make if a braun under van lift was needed? e.g. water tanks couldn't be installed under the van etc
Incredibly helpful! Thank you so much! 💕
You're so welcome!
Uni-strut kits are in your future.
Standardization of structural members will increase your production.
Reliable templates are increasing in numbers.
Bamboo products are in your future too.
🎅 Merry Christmas, George!
And the same to you, Mark!
You are a genius George.
Thank you for your informative 👍. It helps for future buyers.
Glad it was helpful!
Great comparison video, George. 👍
It’s easy to move from the front of the transit to the back in our van at least. (Juniper)
Thank you for this video. Very helpful!
You are so welcome!
Thank you for this video .
which of the two (Transit vs. Promaster) non-extended vans gives you the most length to build inside the cargo space. Assuming that you go with the longer wheelbase.
That's fantastic!
But since each of these models comes in 3 different lengths and 2-3 optional heights, it would be good to a. state which model exactly are we measuring, b. try as much as possible to compare apples to apples. for example, lets take from all 3 makers, the long wheel base, high roof.
And lastly, as you are the absolute expert in this: Which one is your favorite? And which one you think should be the choice for a DIY'er who's not an expert?
Yes, each of these vans was the longest and the tallest and the most heavy duty in their classes. I have a favorite based on my expectations and my intentions for vanlife. I cannot answer that question unless I have all of the individual information for each individual caring to hear the answer.
In other words, each DIYer needs to assess their own expectations and wants needs, and must haves in order to arrive at a decision as to which Van platform is best for them.
@@HumbleRoad Thank you!
Please.. do you know what is the hickness of the sheets steel use on the floor and roof of this this vans ? Gauge.. mm.. any info would be great.. thank you in advance
No idea
Front shower, drain pan in a toe kick that centers over a plugable drain. Parachute curtain stored in the front shelve bar. Whole thing over a max fan, or even shower with the slider open.
That’s a great set up for the younger crowd. Older folks seem to prefer a semi permanent set up. 👍
@@HumbleRoad you don’t build for old people you build for adventurous people who have aged gracefully enough to afford your services. 😉
In the back relocate the spare tire in the sprinter. Drop in a box with plumbing, and the drain pan. A better travato K.
If you need semi fixed structure for a front option then isn’t it time for a wall in front build? No peeping eyes through the cab, much safer in an accident, better temp retention, lots of flexibility and you can still have a pass through.
Happy new year, thanks for all the content!
@@mattsolomon6292 best to you Matt. Thank you for your contributions. 👍🎁
I am interested in the Winnebago EKKO, on the Ford Transit cutaway platform. It has MAYBE a 7" road clearance, not a whole lot. Recently, I saw a Sprinter dueli (spelling?) extended length van and it seemed to have much more road clearance...9" perhaps? Maybe one day you can talk about road clearance and some tricks to perhaps increase road clearance, especially on both Transit and Promaster...if such is possible Thanks for your great videos!
Raising/suspension mods for something like this are a whole different ballgame. Too much cost/risk/small of market for anything but a few to be toying with. Check out the Chevy/quigley conversion sector guys, since the overheads are lower and more out there, more people have played with modifying the suspensions/outcomes and found what to pay most attention to. I’ve seen some of them clear 5 gallon buckets (a lot more than 7 or 9”). You better have money to straight Burn though.
@@chriscunanan Thanks very much for your valuable input...and yes, the $$$ can add up quickly, and if things aren't done "right" it could be quite expensive to try to fix 'right'. Jim at "The Fit RV" (he's an engineer by trade) did the VB air suspension on his new EKKO...maybe gained 1" in road clearance, (and ditched his spare tire) but more than that, he stated that when he got his EKKO, he began doing a number of things (including adding FIVE lithium batteries), changing his propane's stove's position and exchanging it for induction, and putting the sink where the stove was) which added to the overall weight (5 Li+ batteries - whoa!) and that stressed the factory springs. Jim stated that the air suspension improved the ride significantly; that the vehicle's stability and bump/rough road handling improved dramatically, but on his blog, he also stated that 99.9% of the driving was paved highway, which I kind of doubt it's that much, but perhaps he said it as a disclaimer. At the Overland West show this past September in Arizona, I met with the Quigley folks and they said a 1-1.5 inch lift was reasonable, but more likely accomplished by simply buying tires with a larger radius, and making sure they fit the wheel wells. Quigley folks also said Ford Transits don't do well with anything approaching even a two-inch lift, so "be careful". On a side note, they told me that a true 4WD is superior to AWD, but I still don't know the reason except perhaps if one wheel is freed off the surface, it might spin uselessly in AWD whereas in a 4WD, the power to that uselessly spinning wheel would instantly be transferred to a gripping wheel on the ground. ANYHOW...with 6.5 to 7 inches of (factory) road clearance, that's not a whole lot so the EKKO is only safe on relatively smooth gravel roads but certainly would be at risk on rough, rutted roads with larger rocks protruding, or sudden "aggressive/challenging" surface transitions where the (fore/aft) center of the vehicle could be damaged, and that could prove absurdly expensive if towing is needed (ugh). I don't want to go where Jeeps and ATVs go, obviously, and I'd like to get a bit off the beaten path on "relatively smooth ever-so-slightly rough unpaved roads". The Sprinter van chassis with dual rear wheels seems attractive (9" clearance), but Winnebago only builds the EKKO on the Ford transit cutaway, with the little wheels to keep the bed low for the largess of Ford transit customers...van delivery folks. I also heard that the Sprinter chassis is quite a bit more $$ than the Ford Transit, and that it rides "better", but if repairs out of warranty are needed, the Sprinter could cost a veritable fortune. Again, Chris, thanks and be safe and well!
Just started getting serious on my plans to do a van build and was torn between the Promaster and the Transit. This is something I couldn't find anywhere else even on manufacturers website. Super enlightening video and helped make my decision 1000 times easier thank you so much.
which one did you decide on ?>
@@lucydoyle9010 I had decided that the Transit was going to work best for me until I went to the dealership and learned they were sold out for everything they were making up until 2023
@@DaedalusMack I think it will be the same at all dealers??
thank you so much
This is soooo helpful! We have a new Sprinter 3500XD and we are ordering the Borg Dually Valves now. Question about the tire pressure monitoring system - you mentioned adding the sensors inside the valve... I've never heard of that as an option. Do you have a recommendation/link? We really want to have the ability to monitor tire pressures, having experienced some blowouts in our RV quite a few times! Thank you! Love your videos!!
We just installed the TST inside the rims of our LTV and I love it. Hope this helps. With tax it’s ~$750.00
@@jodymooney255 Yes it does! I think that's what we will do as well, much safer to have them installed inside. I guess with this setup - Borg Dually Valves and inside sensors, it'd be hard to rotate the tires... Well maybe that's not necessary.
The decision for me is easy, none of the above :) I like my Chevy Express.
Wait. You’ve got a Pleasure Way? I need to know more. Which one? Only one? Do you also have your own carom build? And…if you choose a small van (18’ or less%) for a build, what would be your pick?
looks like I'm late to the party... but... George, did you measure between the wells on the transit SRW? Asking for a friend!
You are so right about the Borg dually valves on the Sprinter 3500! We had ours done when we lived in Vegas and drove our Sprinter to the shop in California for installation - excellent! It seems the Promaster is the dimensional winner, except in ceiling height. Further notes on the Sprinter 3500: Don't know if this still true on the newer models but our 2012 has had lots of mechanical problems. In the 4-2/3 years that we've owned ours we have spent over $13,000 on maintenance and repairs (long list of repairs). This is in addition to the $4,400 repair job on the DEF system that Mercedes-Benz comped us because of a recall. Wheel sensors are also an expensive issue we haven't had, although many of our Sprinter friends have. This is all despite the higher MSRP of the Sprinter. All of these repairs have put us off of diesels for the future, as well.
it is true that the 2010-2012 or so sprinter had problems with the emissions. This is why Mercedes settled and is paying back sprinter owners about 3600 dollars to fix the problem and added a full 4 years 48k miles warranty. Beside that, still have 3 sprinters post 2015 and 2019, never had a problem.
@@christiankamal7549 Yes, we are waiting for our settlement check, and we are happy that MB paid for the additional $4,400 bill for the DEF heater which totals $8,000 in direct dollar aid, but we still did have another $13k in chassis expenses and we are cringing at the thought of the wheel sensors going out. Glad to hear that you haven't had issues since the 2015 models.
Big fan of the Promaster, until I got to know the Transit this last year.
So as far as the frig cabinet goes for the Transit it would be better to go with one of those side by side frig/freezer combo so you could set it back against the wall more and give you 3-4" of more isle space? So what would be the usable square footage for each van comparison? And if your doing a solar system could it be feasible to mount the big Marmaluke batteries under the floor behind the rear wheels (one on each side) to free up garage space and give you a better weight center of gravity? I mean semi's have outside battery boxes and go into freezing temperatures. Just wondering if the space is available in that location?
I try to put as few components under the van or on top of the van as possible. The extra square footage gained is offset by the exposure and access issues down the road.
It's called the tumblehome, the tapering effect.
The science of temporary thermal window covers are something to watch.
A narrow deep shelf over the cab is a good spot to store them or something else could be designed.
I agree. Window treatments are my weak spot and must be addressed.
@@HumbleRoad - slightly over sized spongy thermal pads can be forced into the window openings while sleeping and for overall warmth. The pads can have a thin sheet of reflective material on both sides. The outer edge is all that needs to be over sized and spongy for a tight fit around the edges. Small magnets can be recessed in two places at the top, bottom, and sides if necessary. and the inner foam pad can be of a stiffer kind. A thin coating of something can cover the recessed magnets to prevent scratching.
Ford just said my 2022 Transit 350HD High Roof Ext Dually is scheduled to be started on 17 January. I'm grateful for the timing of you guys getting two Transits in : ) Really looking forward to see what you'll do with that cable pack running down the driver's side inside the living space. Press on friend... : ) appreciate your company's work.
Ive been trying to figure out transit optioning, but find it confusing. What is the wheelbase length of a 350 extended? It seems like cargo vans have 158 Long and 178 Extended but crew cans are 148 WB. I cant figure out how all these items are differentiated. Do you know?
@@jturbo68 Hello jturbo68 , the wheelbase is still 148" on even the extended models of the cargo and the crew versions. Happy to answer any other questions : )
Saw this video, saw you subfloor video...wow!
Instantly subbed!!
Very very excellent presentation for a novice DIY guy like me! Wow!
Thank you 🙏 welcome to Humble Road!
I recently used both Promasters and Transits delivering packages in a large metro area at 5,000 elevation in all weather conditions; ~80 miles a day, 150 starts a day, side door openings etc .... During a 12 month period we had to replace every single battery, every single key fob on the Transits. When a driver would report their van had stalled and was unable to restart we knew it was a Transit. We thought it may be the design specs of the power system coupled with the position of the battery outside of the engine bay heat and closer to the ground under the driver seat. The Transit is also higher from ground to driver seat, making it quite a leap for shorter drivers. We NEVER had a power problem with the ProMasters, and as you well know, you don't need a drive train if you don't have power.
Sad to hear but I have spoken with mechanics who tell me the sprinter costs a fortune so dont go there. Promasters have Russian-roulette transmissions and other mechanical defects that make them horrible for the long run. They all said transit was most reliable mechanically. Hearing what you experienced makes me think I should wait for a Tesla van... :(. Probably 5 years out... Do you think your experience had to do with the elevation ?
@@LJ-jq8og - true on the Sprinters, others in our sector have them and they hated them! On the Fords - I love the Ford, always had at least one Ford in my personal garage. My perception of the Transit 250 is that the ignition and electrical system are not adequately designed for small parcel cargo delivery at a rate of 100-plus key turns per day, 360/365. I had ten Transits in my fleet and every key snapped off the fob, and every battery had to be replaced. The fob failure may be related to the steering / ignition lock on the Ford and the Battery failure may be related to its position under the driver seat, closer to the cold, out of the warmth of the engine bay. They are also on the fat / tall side and have way more problems under carports, low-hanging trees with inexperienced drivers. On the Promaster - they are well-built, drivers love them and none of the teams that had them noted transmission issues - although it must be said that all of our vans were trashed by the time they got to 100,000 miles ... the only vans of the three that showed transmission issues at low mileage were the Sprinters. Now - don't get me started on step vans!
The Promasters all have the same 3.6 Pentastar Engine and 62TE Automatic Tranny (Front Wheel Drive). It’s the same as the 5th Generation Dodge Grand Caravan/Chrysler Town and Country/VW Routan.
@@williambotha5864 Hysterical about the sprinters, I was IN LOVE with them until I spoke to owners at gas stations and was in shock at their headaches and hassles. $$$$. Even getting service was a pain in the ass as only certain locations were "sprinter qualified" and then they treated individual owners poorly too. TH-cam/instagram are so misleading as to the truth. My only hope is that with the transit if I am not using/treating it too harshly then likely to last longer--common sense I guess. From your post it sounds as though step-vans are even worse. My other take away from your helpful insights is that I will never buy a used van unless I know its true history. Think how many people buy used vans from parcel-delivery services not realizing that van designs are in essence "disposable" after being run hard for a year.
@@LJ-jq8oga transmission for a Penstar is CHEAP. U could swap that thing yourself lol
Baltic Birch has always been great for making drawer bodies and for panels. Alex knows this already.
It was only available in 5 X 5 sheets.
But bamboo plywood and dimensioned lumber are two things coming on strong.
Great video. Going in my saves for when I can afford a custom van conversion. Which of the 3 has all wheel drive?
The Sprinter offers a 4x4 version and the Ford offers AWD. The Promaster is FWD
Love all your videos!
Up early to watch my fav.
Giving back to the community in spades with great comparative info......well done George.
Thanks 👍
Would be nice to see a cost comparison. I like that the transit comes in AWD, and I think Sprinters as well, but seeing how the pro master is a front wheel drive there is no 4 wheel drive option. I know on the transit it's less than 4000 to upgrade, which is pretty nice for a four wheel drive. I come from a northern climate so I really like to have 4-wheel drive. Ground clearance would be another nice thing to know about, but typically 4 four-wheel drives have greater clearance than two-wheel drives. If you look at some older things like the road trek 210s they are horrible in this regard and people spend a small fortune putting lifts on them. Get yourself a long wheelbase with low ground clearance and you can do some damage with high centering. I think this is an important issue. And in watching TH-cam videos from Van Lifers it seems like the Pro Masters break down for more often than some of the others. I would not own a sprinter with the emissions crap. Super expensive to repair and maintain.
for so long I thought that the Sprinter was the best option, turns out the Ford Transit is even better!!
I used to think the same thing!
Can someone tell me if a Thor Motor Coach (Ram Promaster chassis) will get me from Alaska to Tierra del Fuego without leaving me stranded or with a fully depreciated mess?
I have looked at the Revel on-line and it seems like I could get more for the same money elsewhere.
I can afford a custom built 4x4 diesel Sprinter, but I am low on patience. I would go through the process if someone tells me its necessary.
Thank you!
It's worth noting (as someone with extensive dually experience) that if you intend to drive dirt roads with any frequency, rocks can get stuck between the wheels and destroy two tires in no time at all. Your spare will still get you to a service center when this happens, but you'll be on the hook for 2 new tires at the very least.
Ford sells it's 3500 with a "super single" option which is the way to go IMO
Sprinter’s 3500 has the SS option too. We just ordered one.
A very good point, M. That kind of issue should (hopefully) surface in the initial discussions on want, needs and must haves..
A big concern of mine with the super single is its ready availability when you need them most.
@@HumbleRoad I think it's part of a greater discussion about whether any van is suitable for your intended use. If you're regularly on less-improved roads, certainly clearance will be a factor as well. The Transit AWD is lifted somewhat, but the long WB version that is so popular has a very long overhang that gives it a not-great departure clearance.
I'm not talking "rock crawling" at all.... just the ability to head out on a sandy rutted and rock strewn road to some of the more secluded BLM sites in the west, or even Baja Mexico.
I'm a big fan of the biggest dually Transit -- which I use at work, but I'm saddened that it wouldn't be the best to take me where I want to go unless I maybe mounted skid plates and a front/rear winch. It's a great vehicle otherwise, and if you have mostly improved road dreams, I think it's the best of the bunch.
You should mention that the inside body/floor width tapers from the back of the slider opening forward.
Really great basic dimension comparison. I too am considering buy vs build option. I would think the manufacturers would just publish a 3D model for all to use. I can only imagine they can't guarantee accuracy of their builds or they make too many variations over time.
A simple tool for users to make basic space planning would be great and could be a real sales booster.
You could block off an area in your residence somewhere and do a cardboard build.
@@HumbleRoad great suggestion.
I would like to trial a scaled-down German layout with folding twin beds. The desire is dedicated beds that enables equal bed egress for a couple. Raised Chaise lounge or Murphy style that overlaps countertops or dinette seating in sleep mode.
I use sketchup for my plans of van build (or house design for that matter), the warehouse has a good Ducato that seems pretty accurate.
I start with SketchUp as well. The warehouse is a great resource. And as you continue to build with it, you amass your own library of components.
Really makes more sense over purchasing a new vehicle and having it depreciate for an extended time working out the design and sourcing components. In my past work life I have worked with several designers (interior design) that were very proficient with Sketchup but my experience is limited to 2D Visio and schematic drawings. My past attempts with Sketchup have been failures. I really need to revisit this. Would like to have a Transit model to start with.
Ideally I would like modular component approach that would allow removal and replacement relatively easily for service and upgrading.
Do you leave the factory electrical channel on the Sprinter? I see that in this one & I have it in mine. Thx from a Jerseygirl
Yes, I do not alter the chassis other than enlarging existing holes and cutting in the fans an AC