Got a Stihl 460 Magnum, used, got it out of a pawn shop 20 plus years ago, had to show it some love, running a 24 -- 25 inch bar, never had to do nothing to motor, just try and take care of my saws, Even got a used Husky 575 XP, a beast too. Gotta show the Husky a little love again, but my 460 is still clucking along, cut a lot of good size wood with it. Been a great saw. You do a great job, keep at it. I'm in MS Be safe
I do the same thing….rev up, and wait to see chainoil flying off the bar before starting to cut. I throw used oil thru the saw oiler, and adjust for a heavier flow, for plenty of lubrication. I can’t justify paying huge prices for bar oil, I’m a cheap bastard, lol. Merry Christmas to you and your family!
Well, I hope the best for you and the family. Have a wonderful day. Have a wonderful holiday. Enjoy. Take lots of pictures so you have them. Thanks,Tin man
Wow! That 460 sounds like a home run👍🏻 Gotta love when a good disassemble and clean gets ya back on the road! Wishing you and your a very merry and blessed Christmas.
I have a 460 I am starting on this coming week. I hope you will post the videos of building that saw. I could use the pointers. Thanks and Merry Christmas!
i like 460s there strong even stock i have 2 oem ones the problem with mine are the crank barings went on both of mine so if any one rebuilds bottom ends on these id use best crank bearings you can get so iv been stuck useing the trusty 372 id like to get my hands on a 064 not many left theres tons of 066 and 660s
Can’t beat a 7.3 power stroke. I have my grandpas 97 xlt f350 he bought new. Last truck he owned. Just rolled over 200,000, clean as whistle. I’ve put glow plugs in it and while I was at it I put injectors but it didn’t need it. Replaced the oem fuel bowl and pump with an electric pump. Got tired of her seepin. And starters. That’s it. I mean ThTs all. And them old girls are a STIFFF ton truck too. Man they’re stiff. I load the shit out of mine csnt get enough wood on it.
Wow is that saw loud definitely looks like a great build I love the 460 it’s my favorite saw and I have a lot of saws every thing from homelites to the the 500i
Looks like you will have a white Christmas for sure. Merry Christmas to all the channel and your family. I know this year will be extra special with little one. 🎄🙏♥️
Hi Tinnman!!😀😀 Love me some 460 action!! They are my favorite saws hands down!! She is looking really good!! Take care my friend and have a Merry Christmas!!😀😀💚💚 Logger Al
I have a 2000 f250 7.3, 245,000 miles on it same stater, I almost can’t believe it, but then my 1982 ford 4610 tractor with 4400 hrs also has the same starter! Got lucky I guess
Merry Christmas Family Tinman . Watching your Channel for a long Time and i hope you keep doing these nice Vids. Great Saw and great Fix on that Truck. Best Wishes for 24. Kind Regards from Germany
Merry Christmas!!! That saw is impressive. I rebuilt a free 036 Pro and gave it to my son today for Christmas. Your videos were really helpful in my rebuild.
That DGP oil for me was amazing,I don’t have the low temperatures you have up north but I am looking forward to your evaluation. I handed a lot of samples out at the Bunyan and I know Scott Porter/DGP products is eager to see this oil put to the test. 🛢👍👍
Merry Christmas to you and your family, Timan! I would love it if you would make a Playlist on this build. I have an 044 and a ms440 that I want to rebuild The 044 will stay mostly stock just open things up to breathe a little better. The ms440 will probably end up as a 440/460 hybrid build. So any info I can get my hands on is appreciated !
Merry Christmas Tinman. Your new build sounds great. I have a few 046's that haven't seen much use for the last 14 years I've been stuck in a processor. Recently been doing some porting on a few in the old collection. This build inspired a little extra grinding on the lower transfers. Good job!
Merry Christmas, Tinman!!! I always feel like watching your channel is a gift. Keep up the great work, and God bless everyone in this wonderful community.💪🙏
Good catch on inspecting the starter! That sounds perfect now that she’s been cleaned up and reassembled! Hope Christmas was well for you and your family. Happy New Year!
Hey, if that is the original starter, ( the powerstroke isnt hard on starters ), it may not have the water/ condensation drain on it. In your conditions, the bendix area held moisture inside, freezing ice crystals causing no crank symptoms. The drain Which is a small rubber tube like a kazoo end on it. Had to replace hundreds of those starters when they were brand new. Any replacement starter has been redesigned. Thanks for sharing your knowledge & life up there with us.
Merry Christmas! It's a lot of fun with little ones! Hope your truck proves reliable for you, it's a great era for Ford. (after that body style I don't like them) Hope you get your skid steer fixed to, I'm curious what your brother has to say about it. Enjoy your family!
Merry Christmas Tinman, enjoy your holidays fella, you've earned them. That saw sounds like a ripper, it looks like she's making great power dogged in, a good saw, happiest under load, right from the first cut. great work.
How's the Tinman family. Glad you put a video out today wanted to wish you and the family a Marry Christmas and a happy New Year. Hope everyone is doing well
Tin man do you have any experience with the west coast saws barkbox? If so what were your thoughts was there a noticeable gain in power if so where was it high low in the rpm range? Just curious was thinking about getting one !!
I love your channel, so much good 2 stroke information. On an unrelated question, I own a proulan Pro pr48bt blower that has around 30psi compression and will not start. I am having difficulty finding a cylinder/piston kit that will fit it. Are there any after market ones you know of that can work? Thanks
Merry Christmans Tinman! Clean MS461 build! Learned a lot from you and built a cheap chinese saw into a usable product! I also rebuilt a MS200 knockoff cylinder, checked the port timing and dimensions but they are pretty much the same, only exhaust 96 degree instead of stihls 98 degree. Advanced the ignition timing, now it picks up really fast! Great little saw! Will also upgrade my MS361 further already advanced the timing 7 degrees, will doing the muffler mod next and maybe base gasket delete. Any suggestions from your side for the 361?🙂 I love the Stihls though!
MERRY CHRISTMAS
Merry Christmas buddy spoil the girls ☃️🎅🪵👍
It sounds like buckins 500i… I love that sound
Sounds a lot like those RipSaw boys saws! Awesome!
Yep, my 43 CC poulain, bought in 1999 for $150.00 does the same job, today. all the best
😂 no chance!!
Got a Stihl 460 Magnum, used, got it out of a pawn shop 20 plus years ago, had to show it some love, running a 24 -- 25 inch bar, never had to do nothing to motor, just try and take care of my saws, Even got a used Husky 575 XP, a beast too. Gotta show the Husky a little love again, but my 460 is still clucking along, cut a lot of good size wood with it. Been a great saw. You do a great job, keep at it. I'm in MS Be safe
I can’t imagine what it will be once it breaks in😮 you built a fine saw sir
Been cutting elm all week, hard wood! Enjoy the holidays!!!!!
Dead elm is narley to hand split.
In my area the elm is so tuff you can’t split it at all not even with a log splitter it won’t come apart
Green, Foggy, and 50 degrees in mid Michigan. Merry Christmas...Go Lions!
I do the same thing….rev up, and wait to see chainoil flying off the bar before starting to cut. I throw used oil thru the saw oiler, and adjust for a heavier flow, for plenty of lubrication. I can’t justify paying huge prices for bar oil, I’m a cheap bastard, lol. Merry Christmas to you and your family!
Merry Christmas
Merry Christmas, it's 41 degrees Celsius here were I live in Western Australia, on Christmas day. Yay.
Nice saw Tinman! She's a ripper!
Well, I hope the best for you and the family. Have a wonderful day. Have a wonderful holiday. Enjoy. Take lots of pictures so you have them. Thanks,Tin man
That saw has got some gusto! Will make a real nice runner. Bet she'd have some more pull with a timing advance😏
Merry Christmas and God Bless You and Your Family
That saw is freakin sweet
Merry Christmas
Merry Christmas the 460 runs good got three of them thanks God bless
Merry Christmas
Wow! That 460 sounds like a home run👍🏻
Gotta love when a good disassemble and clean gets ya back on the road!
Wishing you and your a very merry and blessed Christmas.
It's Christmas morning for me here in Australia
Merry Christmas
nice saw
Merry Christmas, Tinman and family
Merry Christmas
Good job, Tim man looks like it out of work out. It’s good and strong.
I have a 460 I am starting on this coming week. I hope you will post the videos of building that saw. I could use the pointers. Thanks and Merry Christmas!
Nice work bubby, love the pipe 👏
53k in 23! WOO HOO! Big Congratulations! Pretty Awesome!
Merry Christmas to you and your Family❤️🎄
i like 460s there strong even stock i have 2 oem ones the problem with mine are the crank barings went on both of mine so if any one rebuilds bottom ends on these id use best crank bearings you can get so iv been stuck useing the trusty 372 id like to get my hands on a 064 not many left theres tons of 066 and 660s
Cool. I'll take it just the way it is. Love the 460
Merry Christmas my Canadian brother!
Can’t beat a 7.3 power stroke. I have my grandpas 97 xlt f350 he bought new. Last truck he owned. Just rolled over 200,000, clean as whistle. I’ve put glow plugs in it and while I was at it I put injectors but it didn’t need it. Replaced the oem fuel bowl and pump with an electric pump. Got tired of her seepin. And starters. That’s it. I mean ThTs all. And them old girls are a STIFFF ton truck too. Man they’re stiff. I load the shit out of mine csnt get enough wood on it.
merry xmas tinman family ,and have a great 2024 ,peace an love from scotland stu an family .
Merry Christmas stu
Have a Marry Marry Christmas to you and yours, and to all, out in tinman land. Thanks for the time and effort you put in to this chanel
Merry Christmas to you and the family.
HAPPY HOLIDAYS Mr. Tinman, Saw sounds awesome, I started with a quart of DGP and just received the gallon I ordered. I love the stuff!
Merry Christmas bud I might try some of the build on my stock 044 which is nice as is
Merry Christmas Tinman to you and your family.
Merry Christmas Tinman and family!
Merry Christmas
Merry Christmas to u all
Merry Christmas
Sounds great. Nice crisp sound.
man that saw is nice and sounds good too. good job
Merry Christmas to you and your family, thanks for being so humbled and all you do for this channel, I've learned alot, nice job on the truck lol
Merry Christmas
Wow is that saw loud definitely looks like a great build I love the 460 it’s my favorite saw and I have a lot of saws every thing from homelites to the the 500i
Looks like you will have a white Christmas for sure. Merry Christmas to all the channel and your family. I know this year will be extra special with little one. 🎄🙏♥️
Almost as good as a Husqvarna ! Best wishes for the new year . 👍🇨🇦
Hi Tinnman!!😀😀
Love me some 460 action!!
They are my favorite saws hands down!! She is looking really good!!
Take care my friend and have a Merry Christmas!!😀😀💚💚
Logger Al
Merry Christmas logger Al
Merry Christmas 🎅 🎄 Tinman... the exhaust on that 460 👍😎 sounds amazing
Merry Christmas Tinman and Family. Enjoy
Merry Christmas!!!!
Merry Christmas
Merry Christmas Tinman and Fam. First cut with my stihl 08 20"
Joyeux Noel 🎄
Merry Christmas
Very nice job, saw runs great. Merry Christmas Tinman.
I have a 2000 f250 7.3, 245,000 miles on it same stater, I almost can’t believe it, but then my 1982 ford 4610 tractor with 4400 hrs also has the same starter! Got lucky I guess
Merry Christmas to you and yours From North Carolina
Merry Christmas to you and the whole TinMan family.
Merry Christmas Family Tinman .
Watching your Channel for a long Time and i hope you keep doing these nice Vids. Great Saw and great Fix on that Truck.
Best Wishes for 24.
Kind Regards from Germany
Merry Christmas!!! That saw is impressive. I rebuilt a free 036 Pro and gave it to my son today for Christmas. Your videos were really helpful in my rebuild.
The 460 is a ripper tinman! Very nice work my friend. Merry Christmas to you and your family brother🎄💪🏼
Sweet vid I’ve got a pretty sick 440. I really like these saws. Merry Christmas.
Merry Christma and Happy New Year TM.
One of the best chainsaw channels on YT -Thanks
That DGP oil for me was amazing,I don’t have the low temperatures you have up north but I am looking forward to your evaluation. I handed a lot of samples out at the Bunyan and I know Scott Porter/DGP products is eager to see this oil put to the test. 🛢👍👍
Merry Christmas Marty
Merry Christmas Marty
Merry Christmas Tinman!
TM, the “Powerful Stroke” turned over nice and fast for you 😉🫡
Nice truck!
Merry Christmas to you and your family. The 460 can be a torque monster along with great chain speed. Nice bush fix on the ford starter!
Merry Christmas to you and your family, Timan!
I would love it if you would make a Playlist on this build. I have an 044 and a ms440 that I want to rebuild
The 044 will stay mostly stock just open things up to breathe a little better.
The ms440 will probably end up as a 440/460 hybrid build.
So any info I can get my hands on is appreciated !
Sounds like a great running saw, Tinman! Snappy, and seems to pull hard when dogged in. Keep up the good work 👌🏼
Merry Christmas Tin Man! She sounds crisp and spicy. Well done!
That saw sounds awesome, looks like it performs good too. Good work Tinman. Merry Christmas.
Awesome throttle response and amazing power.
Merry Christmas Tinman. Your new build sounds great. I have a few 046's that haven't seen much use for the last 14 years I've been stuck in a processor. Recently been doing some porting on a few in the old collection. This build inspired a little extra grinding on the lower transfers. Good job!
MERRY CHRISTMAS TINMAN ,,WISHING YOU AND YOUR FAMILY ALL THE BEST FOR 2024 ,, MERRY CHRISTMAS BUDDY ,,,THAT SAW SOUNDS INCREDIBLE GREAT JOB 😁👍👍🌲🌲🌲
Merry Christmas Stevie
Tinman i wanna see you build a early 066 without the decomp option. I think youll be pleased with one stock. Maybe not though. Merry Christmas
I'm sure one day I'll get one to play with.
Merry Christmas
Merry Christmas, Tinman!!! I always feel like watching your channel is a gift. Keep up the great work, and God bless everyone in this wonderful community.💪🙏
Nice job little brother have a merry Christmas also and a happy New Year’s🎉❤
Merry Christmas
Chips ahoy....lol.
Merry Christmas Tinman. Mahalo Mele Kalikimaka 🤙🤙🤙
Merry Christmas
Merry Christmas Tinman all the best to you and your family for the festive season and the new year.
I hope the same goes for all watching too.
Merry Xmas to you and yours 18:31
Good catch on inspecting the starter! That sounds perfect now that she’s been cleaned up and reassembled! Hope Christmas was well for you and your family. Happy New Year!
Nice work Tinman! The recipient is a lucky guy. Merry Christmas everyone.
Happy New Year. Keep up the videos, they are awesome.
Merry Christmas Tin Man and Family!
Merry Xmas 😊
Merry Christmas
Merry Christmas
Hey, if that is the original starter, ( the powerstroke isnt hard on starters ), it may not have the water/ condensation drain on it. In your conditions, the bendix area held moisture inside, freezing ice crystals causing no crank symptoms. The drain Which is a small rubber tube like a kazoo end on it. Had to replace hundreds of those starters when they were brand new. Any replacement starter has been redesigned. Thanks for sharing your knowledge & life up there with us.
Merry Christmas! It's a lot of fun with little ones! Hope your truck proves reliable for you, it's a great era for Ford. (after that body style I don't like them) Hope you get your skid steer fixed to, I'm curious what your brother has to say about it. Enjoy your family!
Merry Christmas 🎄🎁 to your family from mine!!
You do some amazing work! How does one send you a saw?
Merry Christmas Tinman, enjoy your holidays fella, you've earned them. That saw sounds like a ripper, it looks like she's making great power dogged in, a good saw, happiest under load, right from the first cut. great work.
she cuts ehh❤
Merry Christmas and Happy New Year to you and your family. Great build, would love a playlist. Keep it up man and God Bless.
Merry Christmas Tinman
I bet the old chevy will start
Merry Christmas to you and your family. That saw sounds great
How's the Tinman family. Glad you put a video out today wanted to wish you and the family a Marry Christmas and a happy New Year. Hope everyone is doing well
Merry Christmas Kurt
elm is pretty hard... australians: hold my beer 😂 merry christmas tinman!
Sounds amazing! Are loggers in Canada allowed to run without spark arrestors. Merry Christmas.
Tin man do you have any experience with the west coast saws barkbox? If so what were your thoughts was there a noticeable gain in power if so where was it high low in the rpm range? Just curious was thinking about getting one !!
I love your channel, so much good 2 stroke information. On an unrelated question, I own a proulan Pro pr48bt blower that has around 30psi compression and will not start. I am having difficulty finding a cylinder/piston kit that will fit it. Are there any after market ones you know of that can work? Thanks
all the best to you and your family merry Christmas
Merry Christmas
Merry Christmas. Which chainsaw files do you use?
Merry Christmans Tinman! Clean MS461 build! Learned a lot from you and built a cheap chinese saw into a usable product! I also rebuilt a MS200 knockoff cylinder, checked the port timing and dimensions but they are pretty much the same, only exhaust 96 degree instead of stihls 98 degree. Advanced the ignition timing, now it picks up really fast! Great little saw! Will also upgrade my MS361 further already advanced the timing 7 degrees, will doing the muffler mod next and maybe base gasket delete. Any suggestions from your side for the 361?🙂 I love the Stihls though!
😮