Hello, We are a small team based in Belgium, Europe. While working on Mission 1, we came across your videos and were truly impressed by the agility and precision of your robot’s movements. We read in the comments that you use specific LEGO parts (and luckily, we have them too! 😊). If we understood correctly, you place them at the center of the robot, at its center of gravity, and use the gyro to maintain a straight trajectory. We already use the gyro for turning, but we haven’t yet figured out how to use it for going straight. If you have any tips or advice to share, we’d be thrilled to learn from your expertise. Of course, we understand if it’s your little secret 😉. Thank you in advance for your help, and congratulations again on your amazing work-it’s truly inspiring to us! Best regards, New Team Pirmez
You can give me your email,I will send the program to you.But the program still needs to be revised and is not very accurate, but it is good enough for competitions.
One reason why the lifting structure bounces is that the lifting force is insufficient, causing the gears to slip. This situation can be improved by increasing the gear ratio.
Hello,
We are a small team based in Belgium, Europe. While working on Mission 1, we came across your videos and were truly impressed by the agility and precision of your robot’s movements.
We read in the comments that you use specific LEGO parts (and luckily, we have them too! 😊). If we understood correctly, you place them at the center of the robot, at its center of gravity, and use the gyro to maintain a straight trajectory.
We already use the gyro for turning, but we haven’t yet figured out how to use it for going straight. If you have any tips or advice to share, we’d be thrilled to learn from your expertise. Of course, we understand if it’s your little secret 😉.
Thank you in advance for your help, and congratulations again on your amazing work-it’s truly inspiring to us!
Best regards,
New Team Pirmez
You can give me your email,I will send the program to you.But the program still needs to be revised and is not very accurate, but it is good enough for competitions.
Great. Congratulations!
What do you do to make the robot go smooth ? We see a lot of wobbling with our robot ?
Do you use gyro for going straight
I use the lego 73090b to keep the the robot from shaking,and Using a gyro makes the robot go in a straight line, but there will still be errors.
What is lego73090b?@@derekchen1749
The strangest way i ever seen do ms 15
Beaucse my robot is too big.
How are you locking down your attachments, out lifting attachments tend to pop out.
One reason why the lifting structure bounces is that the lifting force is insufficient, causing the gears to slip. This situation can be improved by increasing the gear ratio.
You didn’t score on mission 7 raise the mast since it needs to be upright not fallen over
Yes, this mission did not score any points, and the structure needs to be revised.