How To Trigger Auxiliary Lights With Highbeams, Lowbeams, or Foglights!
ฝัง
- เผยแพร่เมื่อ 27 ส.ค. 2024
- Want to turn on auxiliary lights when you turn on your headlights or fog lights? Here's how to do it. This will allow you to tie in aftermarket lights, be it a light bar, fog lights, additional driving lights and more, into your current light system to control the lights with current buttons or switches in the car. I cover wiring and the circuit you'll have to make, including grounds, power, splices, relay trigger wire, and more. It's actually fairly simple to do, feel free to leave any questions or comments that you might have!
Get Hella 500s here! (Affiliate links for which I may be compensated)
amzn.to/43CXlla
CashedOutCars, Cashed Out Cars, CashedOut Cars For additional content, check out www.cashedoutcars.com!
Get Hella 500s here! (Affiliate links for which I may be compensated) amzn.to/43CXlla
You are the only one one TH-cam that understands how to do this
I remember that being the case when I made this video.. glad it helped!
This is what I have been looking for. Thanks
Happy to help!
can you do a video on how to pick up chicks
Step 1: Sell your 250F and buy a 2 stroke
Lol
Perfect explanation. Couldn’t find any other videos that explained this better!
Do you need 1 relay per auxiliary high beam lights ? Or can use 1 for 2 auxiliary lights ?
I want to add 3.5" driving lights but want them to stay on when Im using high or low beams using the factory headlight switch... how do I do that?
Can you do this to your factory fog lights soo basically when you flash your fogs come on same time?
Could I get a list of all the pieces I need to buy please, I assume it’s just a relay (whatever that is 😭), and some wire
No need for a diode?
Hooking up to my low beam Headlights
If your lights are set to automatic, will whatever you splice into the low beam come on when low beams are triggered by the sensor and be off when they are not triggered by the sensor?
Thanks
What is better ground? Negative pole of the battery or a metal piece on the chassis as you did?
To the chassis would be best and shortest route.
Hi good morning I have Honda civic sedan and I connect plug and play harness to my fog lights .
There is additional wire on my aftermarket fog lamps which need to connect with daylight running light please give me some advise what is the best solution .
If I connect only fog lights direct to battery will it works ?
Was you able to go in the car wash after you installed them I don't want to have them get ripped off
I didn't test that but the mounts are pretty rugged
What about if you want to use a switch
If you wire the switch inline with the wires for the lights you want to have switched, then it will do the same thing
I only saw one yellow wire which goes to power from high beam to one hella light. so aren’t u suppose to have another yellow wire going from the other big beam to the. Otehr hella light?
A year later...he did say he showing just the mock up so obviously it will apply for the other side as well mate👍👍👍
Which wire from the high beam gets spliced? There's three on my car
Power
Sounds like you have the dual-function bulb with low and high beam. So, the three wires are low, high and ground. Just use DVM to check when you have the high beam turn on.
Where is the diagram you said you was gonna show????...
Scotchlocks 😖😖😖