Setting Up a NMEA 2000 Network-UPDATED 2023
ฝัง
- เผยแพร่เมื่อ 20 ก.ค. 2023
- Be sure to check the links below for any of your marine needs!
*Inventory subject to change
LOWRANCE PRODUCTS:
Lowrance Hook2 Series Units:
www.russellmarineproducts.com/...
Lowrance HDS Units:
www.russellmarineproducts.com/...
Lowrance Elite Series Units:
www.russellmarineproducts.com/...
Lowrance Carbon Units:
www.russellmarineproducts.com/...
MINN KOTA PRODUCTS:
Minn Kota Trolling Motors:
www.russellmarineproducts.com/...
HUMMINBIRD PRODUCTS:
Humminbird Units:
www.russellmarineproducts.com/...
RMP PRODUCTS:
RMP Anchor Lights:
www.russellmarineproducts.com/...
RMP Screen Protectors:
www.russellmarineproducts.com/...
RMP Motor Covers:
www.russellmarineproducts.com/...
RMP Power Pole Covers:
www.russellmarineproducts.com/...
RMP Electronic Glove Covers:
www.russellmarineproducts.com/...
RMP Prop Storage Bag:
www.russellmarineproducts.com/... - ยานยนต์และพาหนะ
Spot on!👊🏻🇺🇸
Very cleared🎉
Glad it helped
This is a great NMEA guide … Mnmkay..
Thank you!
Excellent job explaining,thank you so much ❤🤙
Glad it was helpful!
Making it sound easy. Thanks
No problem! Thank you for watching
Is the power cord to the back bone used to power say a VHF or is the power directly to the VHF still required?
So any 12v power will do? I was led to believe power supply has to be connected to ignition so there's only power on nmea when 12v is sent to motor.
Factory connected power to the end connection, not the T. Is this correct?
I do have a question 🤔.
I am about to hook my nmea network up. My concern is that I have one battery powering my electronics only.
The battery is a 16.8 volt battery.
Is that going to be ok with the nmea network?
Does the extension ever go direct to a unit or is it always to an additional T connector?
Always to a t.