i understand completely, U want people to stop using blade designs while they have their whole imagination to make use of. Yes, its fine to look for ideas, but make sure to make your own design. Love u man, peace love and joy. Ps is anyone watching this during lockdown? XD
man, I'll tell you, I've been addicted to TH-cam for only 3-5 months, and found you today. very very well done! I'm a welder for over 40 years, very excited about getting more into blacksmithing, however the past several months have been seriously engrossed in Bladesmithing. this video was the most informative of all. in excited to begin making my first neck knife. I have a lot of years left, and I plan on spending them mastering all of the crafts I haven't yet. thank you thank you thank you.im looking forward to learning much more from you and talking much more...
Awesome man! Glad you find the videos enjoyable. I love TH-cam also for the people that make things on there. It's a great place to learn, and there are so many different ways that people go about the same thing, it's like hanging with a bunch of tradesmen whenever it's convenient for you. I'm a millwright by trade and there is just so much to learn in metal working that it makes it very exciting! Always lots of new techniques and methods of doing things. Keep in touch for sure! You're enthusiasm is refreshing! Cheers!
Thank you so much Jeremy for going the extra mile to film and post videos on TH-cam. Your work is so inspirational to me. I have been slowly buying all sorts of tools for my little woodshed knife shop. I haven't been able to complete a knife yet, because I wreck the grinds so bad. I am learning thanks to you. I just wanted to say thank you for all of your hardwork. Hopefully soon I will have a knife I can be proud to show you. Thanks again from Conway, Arkansas USA!!
+Derek Reed thanks so much Dereck! I really appreciate the compliments and glad to hear that you're tools set up and getting into knife making. Cheers👍
im looking all the time videos about knife making and you sir got the best. well explained, clear words and go to the bone, this for this and that for that. greetings from Argentina
VERY comprehensive and helpful. I'm totally new to this hobby, and having someone run through the basics in such a way gives me a great deal of confidence in successful bladecraft. I thank you very much.
Remember to have them trace your templates on paper and send you back your original. Nice tool list so far and can't wait for later video. Harbor Freight tool run to get my tool list together.
Thanks Jeremy for the informative video and the entire series on bladesmithing. I have always been fascinated by knives. Collected for years and wanted to my own. Financially I assumed it would require at least 500 to 800 intial investment seeing as I have zero tools but recently I had decided that I WILL figure out a way without such a large (for me) investment to start up. Upon really looking into it I was ecstatic to find others who started up with less than $100 investment. Some even less than ,,$50. And finding your channel, this series and this video was a jackpot. I'm going to get my starter tools tommorow. Mostly from harbour freight. Low price and surprisingly decent to good quality on a lot of this list. This Sunday I will be working metal for sure and the journey begins. Finally!!!! Thanks again
I want to start making knives, and i have a (i think at least) really cool looking knife. I didnt even use those templates, i used a fork and a resturant knife while at dinner and i was bored. I got the rough design and cut it out of wood with a hack saw. i then made notes and cut another one out of wood untill i was happy. i still dont even have the measurements, but i have used a ruler to drawl out some pices i wanted to remove on the knife so i can put some paracord in to it. im going to suqare it up with a ruler and measurements, then put it in metal.
I actually made a knife out of a loose bit of concrete reo, it's not much to look at or use but hey it's an awesome feeling. thanks for the great video by the way
Thanks for these videos. Keep up the good work. You're very straight to the point, good video production, speed, technic, instructions. Just subscribed. Will make an attempt myself to one in the future. Thanks :)
Thank you Jeremy first of all for explaining this stuff on videos, I still have a couple of questions and if you happen to read them, and maybe have time to answer that would be of a lot of help: 1) what kind of steel do you buy and how much you think its a fair price? 2) Say someone wants to make a profit out of this activity, is there margin or is it an attempt destined to fail? Thank you a lot!
I'm very new to this but I've always loved to make things. plus I love knives, so I figured why not put them together! is there a profit to be made in this to keep this hobby alive?
Yeah I would say so. Not in the beginning. But as your knives get better you people are willing to pay more for them. But I wouldn't do it to make money. Do it for passion first and if you're good, then money will come. Like most things in life I suppose. Cheers!
get a drill bit the thickness of the knife blank then use to scratch the center line of the blank since the point of the drill is half the thickness of the blank so you have a center line to file or grind down to and take off to much on one side
i want to start making my own knives and i thought this 3 part video about the bare requirements was great and very informative. i did was to ask because i came across a piece/sheet of nickel (12in×8in). Could I make a knife with this piece of nickel?
+undertheshadowhc you know what? I actually have that info in this video: th-cam.com/video/TyS8kU81y4c/w-d-xo.html and it's right at the 3:30 mark. I hope it helps. Cheers!
Couldn't help but notice your nod to Canadian tire. mind me asking what part of Canada you're from?? (asking cause if you're close I'd love to see if you're interested in teaching how to make knives) thanks 😊
he uses 01 tool steel. but any high carbon steel should be good. My only problem is no one sells it where I live and i don't want to buy it online because shipping prices is retarded
O1 is good, 5160 is alright but is fussier to heat treat if you want to do that yourself, 1084/1085 also are nice simple carbon steels to start with. 5160 equivalent spring steel can be had from old car or truck leaf springs, just keep in mind that used leaf springs could have micro fractures from the stress of being used. Most knifemakers recommend starting with known steel, just because there is more information to be had about working it and heat treating it. It costs a bit more that way, but it's safer and easier in the long run.
What thickness and width should I use for a knife. I am very much so a beginner. Should i be using 1/8 or 3/16 thickness? And would you recommend 1 inch width, 1-1/2, 1-1/2? As far as far as the type of steel, I know that most people recommend 01, 1084, or 1095.
A digital readout caliper isn't actually that expensive. Harbor Freight has a few different models that run from under 10 bucks to around 35-40, I believe. I'd recommend not getting the base model, because it lacks the precision of having that adjustment wheel.
I would say yeah. It will let you know if you love making knives or not and if you don't, you're not out a whole bunch. If you do, you'll use it even after you upgrade. I made a 2X72 and then even after buying a KMG, I still use my homemade one all the time. I quite like having two grinders. I'd say a cheap 1X 30 is a great way to get started. Cheers!
220, 400, 1000, 1500, 2000, and a buffing wheel that will run you 150+ don't go for mirror on your 1st knife if you don't have money or the tools for it.
All depends on where you live. knifemaker.ca is great if you live in Canada. Or Metal Supermarkets has locations across Canada and US. Other than that I can't say. Cheers!
i used a bench grinder to set a concave bevel, then used 220 over a piece of steel flatstock to flatten it out. if you really want a belt sander it will run you quite a bit. just wondering, did you ever get around to it?
You can use metal things if you want. It's mostly a preference thing. Handles for tool are more comfortable with something like wood or synthetic materials. Synthetics like G-10 and stuff are chosen because they are very tough, water resistant and fairly easy to work. Also, I live in Canada, and a metal handle on the knife would make your hands cold faster during the winter. Cheers!
+TNTMAN0_0 They work well. I remember this set kicking around my dads office when I was like 8. I eventually stole them and have been using them ever since:)
I've never drawn a knife before, but I have spent a good portion of my life around people who do forge knives, including a master bladesmith by the name of Shiva Ki. I'd like to get into stock removal with hand tools and perhaps eventually work my way up to a belt sander and what not. Anyway, here are a few sketches I just did. Honestly, I'm not the best at drawing either, but freehanding a knife wasn't all that difficult. If I can do it, anyone can. I know these are a bit rough looking, but I think they would make fine knives. I think I tend to get into the hunter/skinner knife design most, if it's not already obvious, and I tend to put a lot of emphasis on hand grip and comfort: drive.google.com/open?id=1bgH451o7ytdVPifJ5hyKUFXyi6pef5kH drive.google.com/open?id=1UAoDrDeyVt4lfADKXuZ8ZvPkvKBv0AyU drive.google.com/open?id=1BRR07wP6pR_Az6gBp8G2nhZ2uUO6SJ4l
Knives and veggie gardens for the win! I'm trying to get into both now
Right on! 👍
Absolutely a fantastic video very very well done in educational thank you, beautiful piece of work
I really appreciate what you said "make your own design". Now I have opened my mind for a 6 inch knife from end to end.
I wish i could like ur videos twice! TH-cam needs to make a 2x Like buttons! Cuz this series deserves more than 1 like
I can't get enough of these videos
i understand completely, U want people to stop using blade designs while they have their whole imagination to make use of. Yes, its fine to look for ideas, but make sure to make your own design. Love u man, peace love and joy. Ps is anyone watching this during lockdown? XD
man, I'll tell you, I've been addicted to TH-cam for only 3-5 months, and found you today. very very well done!
I'm a welder for over 40 years, very excited about getting more into blacksmithing, however the past several months have been seriously engrossed in Bladesmithing. this video was the most informative of all. in excited to begin making my first neck knife. I have a lot of years left, and I plan on spending them mastering all of the crafts I haven't yet.
thank you thank you thank you.im looking forward to learning much more from you and talking much more...
Awesome man! Glad you find the videos enjoyable. I love TH-cam also for the people that make things on there. It's a great place to learn, and there are so many different ways that people go about the same thing, it's like hanging with a bunch of tradesmen whenever it's convenient for you. I'm a millwright by trade and there is just so much to learn in metal working that it makes it very exciting! Always lots of new techniques and methods of doing things. Keep in touch for sure! You're enthusiasm is refreshing! Cheers!
I am 14 and hope to get into this hobby especially when I get a job when I'm 15 but I want to do this!
You should! Cheers.
+Simple Little Life thanks
Tanzerite how's the hobby going?
@@Joshua-hz3cl i gave up lol
Same, I turn 15 next month.
Absolutely agree on the digital calipers!
Thank you so much Jeremy for going the extra mile to film and post videos on TH-cam. Your work is so inspirational to me. I have been slowly buying all sorts of tools for my little woodshed knife shop. I haven't been able to complete a knife yet, because I wreck the grinds so bad. I am learning thanks to you. I just wanted to say thank you for all of your hardwork. Hopefully soon I will have a knife I can be proud to show you. Thanks again from Conway, Arkansas USA!!
+Derek Reed thanks so much Dereck! I really appreciate the compliments and glad to hear that you're tools set up and getting into knife making. Cheers👍
That was a brilliant video. You know how to explain without confusing the viewer. Thank you.
Hi,this is a great channel specially for people like my, without pro machinery, i live in Cuba, i love make knives and also have basic tool, so thanks
+Iosmel Sánchez Martínez great, glad it helps you out! You're welcome and cheers!👍
im looking all the time videos about knife making and you sir got the best. well explained, clear words and go to the bone, this for this and that for that. greetings from Argentina
VERY comprehensive and helpful. I'm totally new to this hobby, and having someone run through the basics in such a way gives me a great deal of confidence in successful bladecraft. I thank you very much.
Watched all three videos, super informative and appreciate the content.
Thank you so much! 🙏👍
I really appreciate for your comprehensive video series. So impressive and encouraching. Thanks a lot.
New favourite channel
Watched the vids in oposite direction now back to part 3! Awesome video Jerermy!
Thank you very much! I really appreciate it. Cheers!
Thanks for the great informative video!
Great this was exactly what i was looking for, thanks
Great video. Looking forward to the rest. Thanks.
Well, this is going to be interesting as hell.
hey hey yeah it is! And fun:)
Raindance Bushcraft ikr
I think that was sarcasm dude.
As always, thank you for sharing your knowledge.
Cool topic man, very inspiring.
very good tutorial 👍🏻
I started making my first knife after watching these vids... will send you pics when it's completed
thanks man . great help you were . you gave me the will power to make a knife . I am gona send the pic once I m finished
Remember to have them trace your templates on paper and send you back your original. Nice tool list so far and can't wait for later video. Harbor Freight tool run to get my tool list together.
Thanks Jeremy for the informative video and the entire series on bladesmithing. I have always been fascinated by knives. Collected for years and wanted to my own. Financially I assumed it would require at least 500 to 800 intial investment seeing as I have zero tools but recently I had decided that I WILL figure out a way without such a large (for me) investment to start up. Upon really looking into it I was ecstatic to find others who started up with less than $100 investment. Some even less than ,,$50. And finding your channel, this series and this video was a jackpot. I'm going to get my starter tools tommorow. Mostly from harbour freight. Low price and surprisingly decent to good quality on a lot of this list. This Sunday I will be working metal for sure and the journey begins. Finally!!!! Thanks again
I like this man
Right on. 👊 thank you 👍
great video, helps a lot for beginners
Excellent video, thank you!!
You're welcome!
Really nice video! Thanks
I want to start making knives, and i have a (i think at least) really cool looking knife. I didnt even use those templates, i used a fork and a resturant knife while at dinner and i was bored. I got the rough design and cut it out of wood with a hack saw. i then made notes and cut another one out of wood untill i was happy. i still dont even have the measurements, but i have used a ruler to drawl out some pices i wanted to remove on the knife so i can put some paracord in to it. im going to suqare it up with a ruler and measurements, then put it in metal.
Do it!
Don't the cord handles hurt your hand?
Awsome video you have been an inspiration for me to want to try to make a knife.
I can't wait to see your channel explode with subs. a lot of people are missing out right now. Congrats on 2k subs :)
+Warndog Thanks so much! Really appreciated!
I’m watching this 2 years after you comment and there is over 150,000 subs
Excellent video.
Subscribed.
Thank you very much! I appreciate that! 🙏👍
Great video! Lot's of good tips, thank you!
+NUMan14 Thank you very much!
great video im a new sub and i cant get enough of this channel... also
second
+Brennan Glazier Right on and thanks!
Great channel!! Congrats on the 2k mark.
+Ken Brannon Thanks!
I actually made a knife out of a loose bit of concrete reo, it's not much to look at or use but hey it's an awesome feeling. thanks for the great video by the way
+Chwe Walle That's cool. That awesome feeling is where it's at for sure:) Glad you enjoyed the video. Cheers!
Thanks for these videos. Keep up the good work. You're very straight to the point, good video production, speed, technic, instructions. Just subscribed. Will make an attempt myself to one in the future. Thanks :)
thanks for this video.
Very cool channel! Thanks
Thank you and you’re welcome! 👍
Thank you Jeremy first of all for explaining this stuff on videos, I still have a couple of questions and if you happen to read them, and maybe have time to answer that would be of a lot of help: 1) what kind of steel do you buy and how much you think its a fair price? 2) Say someone wants to make a profit out of this activity, is there margin or is it an attempt destined to fail? Thank you a lot!
What you called "a small jig saw" is actually called a "coping saw"
Have a great day 👍🏻😀
I'm very new to this but I've always loved to make things. plus I love knives, so I figured why not put them together! is there a profit to be made in this to keep this hobby alive?
Yeah I would say so. Not in the beginning. But as your knives get better you people are willing to pay more for them. But I wouldn't do it to make money. Do it for passion first and if you're good, then money will come. Like most things in life I suppose. Cheers!
get a drill bit the thickness of the knife blank then use to scratch the center line of the blank since the point of the drill is half the thickness of the blank so you have a center line to file or grind down to and take off to much on one side
i want to start making my own knives and i thought this 3 part video about the bare requirements was great and very informative. i did was to ask because i came across a piece/sheet of nickel (12in×8in). Could I make a knife with this piece of nickel?
I only have a dremel but it gets me by only making medium sized knives but it uses cuting wheels really quickly
Yeah those little cutting wheels disappear too quickly I think. It's a bummer they don't make longer lasting ones but cause they are so handy!
Any chance you can do a video on the jig you use to get the proper angle for the grind on your blade when using the belt sander?
+undertheshadowhc you know what? I actually have that info in this video: th-cam.com/video/TyS8kU81y4c/w-d-xo.html and it's right at the 3:30 mark. I hope it helps. Cheers!
Thanks!
شكرا على المعلومات القيمة
+R. Almodafeer you're welcome!
Couldn't help but notice your nod to Canadian tire. mind me asking what part of Canada you're from?? (asking cause if you're close I'd love to see if you're interested in teaching how to make knives)
thanks 😊
What is the name of the song u use at the end of your video, i'd like to download it, it's so relaxing 😊👍🏻
How do I heat treat without any blow torches or proper equipment? And what oil could I use?
What kind of steel should I buy?
I would like to know as well.
he uses 01 tool steel. but any high carbon steel should be good. My only problem is no one sells it where I live and i don't want to buy it online because shipping prices is retarded
Try old sawblades.
They might not be as thick but they are good steel.
I ended up getting some 01 steel from onlinemetals.com, was a pretty reasonable
O1 is good, 5160 is alright but is fussier to heat treat if you want to do that yourself, 1084/1085 also are nice simple carbon steels to start with. 5160 equivalent spring steel can be had from old car or truck leaf springs, just keep in mind that used leaf springs could have micro fractures from the stress of being used. Most knifemakers recommend starting with known steel, just because there is more information to be had about working it and heat treating it. It costs a bit more that way, but it's safer and easier in the long run.
so im thinking of doing this. I have a electric sander for wood working with sandpaper for wood would that work?
Wow one of the first helpful how-to's thanks man keep it up , btw what wood was used for the handle on the knife at 3:06?
Thank you! It's Babinga. Cheers!
why hollow sir wht kind of tool do I need to make a knife
Great video, I've seen it many times! Greetings from Mexico.
13:37... lol LEET
What thickness and width should I use for a knife. I am very much so a beginner. Should i be using 1/8 or 3/16 thickness? And would you recommend 1 inch width, 1-1/2, 1-1/2?
As far as far as the type of steel, I know that most people recommend 01, 1084, or 1095.
Thanks for the video mate u got a new sub. What type of steel do you use for your knives
GOT THIS BALD KEANU REEVES GOING ON THERE.
He really look like Keanu Reeves
I just subscribe to your channel. FINS UP 👍 👍
Hi... i want to know what type of oil do you use for your knife not to get rust
Hi Jimmy, what sort of drill bit I should use and should I use high speed or low. Thanks William
low speed
What minimum size vice would you recommend? I'm hoping a 4.5 inches would work, I don't see why not but I ask anyway
Steve Sowinski yea
Steve Sowinski I was wondering same thing
Steve Sowinski I have a 4" vice, works amazing no need for anything much bigger than 4-5"
Can you make the bastinelli raptor knife?
I want to make a small neck knife what steel should I use
Somebody once told Me "to be good at something First You have to bad at it "
A digital readout caliper isn't actually that expensive. Harbor Freight has a few different models that run from under 10 bucks to around 35-40, I believe. I'd recommend not getting the base model, because it lacks the precision of having that adjustment wheel.
What kind of steel you use? You get it from home depot?
Is it worth it to drop $60 on a cheap belt grinder 1x30 when just starting with knife making?
I would say yeah. It will let you know if you love making knives or not and if you don't, you're not out a whole bunch. If you do, you'll use it even after you upgrade. I made a 2X72 and then even after buying a KMG, I still use my homemade one all the time. I quite like having two grinders. I'd say a cheap 1X 30 is a great way to get started. Cheers!
Hello there sir. I've been searching for someone to make the custom knife I've drawn up...do u do that?
Yes I do, just as long as it’s in my “wheel house” if you know what I mean. You can email me jeremy@homesteadknives.com 👍
1:57 I appreciate the sentiment.
you got a sub man. you got useful information, presented in a rational way.
What type of drills bits do you use?
220, 400, 1000, 1500, 2000, and a buffing wheel that will run you 150+ don't go for mirror on your 1st knife if you don't have money or the tools for it.
Can you show how to make the Bevel jig
+Big fish That's coming up on the channel.
How do you drill the holes with no drill press
where would I be able to buy the steel to make the knives??
All depends on where you live. knifemaker.ca is great if you live in Canada. Or Metal Supermarkets has locations across Canada and US. Other than that I can't say. Cheers!
Lawn mower blades should be made from a pretty good steel for knives, and are generally quite rectangular in shape.
Lawnmower blades work good will teach u lot cheap to start with l have one made out of it works good with walnut handle
do you think anyone called that number that is written on your hand just for kicks?
can i use scroll saw to cut steal?
Which file is best for knife making?eg:double cut/single cut
One file with one cut on each side 👍
Hey I'm new to your channel was looking at buying some grinders and sanders for a great finished knife was wondering if you could help me out?
i used a bench grinder to set a concave bevel, then used 220 over a piece of steel flatstock to flatten it out. if you really want a belt sander it will run you quite a bit. just wondering, did you ever get around to it?
My problem is space. Santa Barbara, Ca ... the space for work area is so much more costly than any tools. :-/
Sorry if this is a stupid question I am new to all this. Why do people make scales out of non metal things ???
You can use metal things if you want. It's mostly a preference thing. Handles for tool are more comfortable with something like wood or synthetic materials. Synthetics like G-10 and stuff are chosen because they are very tough, water resistant and fairly easy to work. Also, I live in Canada, and a metal handle on the knife would make your hands cold faster during the winter. Cheers!
Thank you for the info and vid
tommy tran You betcha! Cheers!
Sorry, I've grown up with video games and electronic music and TV, but all this cuts in the video make me crazy...
You put jigsaw but in the UK there called coping saws
Where are the second and third videos? Can I have the links?
What type of steel should I use
Nolan Palaima O1 Tool steel is a good one to get started !
wait is that true with all files are just single cut files?
Not sure if you have but can you list all the tools you showed.
Sorry lol I won't be lazy. Great video. I am just watching without a pencil and paper handy. Forgive my laziness lol
Does anyone know a place online where i can get 01 tool steel for cheap?
The knife you show at 3:15 is that something that you made your self or is it like a bark river or somthing? :P
Neck knife ..............WOW
Drill bits, so I assume a drill too? What type?
Any good ideas for a cheap one? Around 100 dollars?
Endlar Filmations U Can find a cheap drill press for 100$
holy crap I used to have the same set of French curves
+TNTMAN0_0 They work well. I remember this set kicking around my dads office when I was like 8. I eventually stole them and have been using them ever since:)
Can't find good drill bits anywhere.
I've never drawn a knife before, but I have spent a good portion of my life around people who do forge knives, including a master bladesmith by the name of Shiva Ki. I'd like to get into stock removal with hand tools and perhaps eventually work my way up to a belt sander and what not. Anyway, here are a few sketches I just did. Honestly, I'm not the best at drawing either, but freehanding a knife wasn't all that difficult. If I can do it, anyone can. I know these are a bit rough looking, but I think they would make fine knives. I think I tend to get into the hunter/skinner knife design most, if it's not already obvious, and I tend to put a lot of emphasis on hand grip and comfort:
drive.google.com/open?id=1bgH451o7ytdVPifJ5hyKUFXyi6pef5kH
drive.google.com/open?id=1UAoDrDeyVt4lfADKXuZ8ZvPkvKBv0AyU
drive.google.com/open?id=1BRR07wP6pR_Az6gBp8G2nhZ2uUO6SJ4l
U called the coping saw a jigsaw