Razer Blade 15 Advanced (2018) Disassembly, fan cleaning and thermal paste replacement
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2024
- This step-by-step video guide shows how to fix laptop overheating: disassembling Razer Blade 15 2018 Advanced model RZ09-02385, cleaning fan from dust, and replacing thermal paste.
Buy tools and parts on AMAZON:
Screwdriver Set: hfixt.com/spro
Opening Tool Set: hfixt.com/pryt
Magnetic Mat: hfixt.com/mat
Tweezers: hfixt.com/tzrs
Thermal paste: hfixt.com/past
Thermal pads: hfixt.com/tpad
Global AliExpress:
Screwdriver set: hfixt.com/alis
Opening tool set: hfixt.com/alit
Magnetic Mat: hfixt.com/amat
Tweezers set: hfixt.com/altz
Thermal paste: hfixt.com/alip
Thermal pads: hfixt.com/apad
Useful links
How to fix laptop overheating: • How to fix laptop over...
The best thermal paste for laptop: • The Best Thermal Paste...
Laptop Cooling Pad Efficiency: • Laptop Cooling Pad Eff...
More DIY repair guides: how-fixit.com
FOLLOW ME:
Instagram: / howfixit
Facebook: / howfixit
Twitter: / howfixit
DESCRIPTION
Welcome to HowFixit! In this video, I'll take you through a step-by-step guide on how to disassemble Razer Blade 15 2018 Advanced model RZ09-02385 laptop, clean its fans, and replace the thermal paste. Our comprehensive tutorial will equip you with the knowledge of fixing laptop overheating issues. From disassembling your laptop to cleaning the fan and heatsink from dust and applying thermal paste, we've got you covered. Say goodbye to overheating and hello to improved performance!
* Laptop Disassembly Guide:
Disassembling your laptop may seem daunting, but I'll break it down into easy-to-follow steps. You'll learn how to remove the laptop's casing, locate and clean the heatsink and fans, and access to CPU for thermal paste replacement. By following this guide, you'll gain a deeper understanding of your laptop's internals and how to keep it running smoothly.
* Fan Cleaning Techniques:
Dust and debris can accumulate in your laptop's fans and heatsink over time, leading to reduced airflow and increased temperatures. I'll show you effective methods to clean your laptop using an antistatic brush and proper handling techniques. By keeping your cooling system clean, you'll prevent overheating and extend the lifespan of your laptop.
* Thermal Paste Replacement:
Thermal paste plays a crucial role in transferring heat from the laptop's CPU and GPU to the heatsink. However, over time, a thermal paste can dry out and lose its effectiveness. I'll guide you through the process of removing the old thermal paste and applying a fresh, high-quality one. This step is vital for optimal heat dissipation and temperature management. Don't let an overheating laptop slow you down! Watch this comprehensive guide and take control of your laptop's temperature. By performing regular fan cleaning and thermal paste replacement, you'll ensure smooth operation, prevent hardware damage, and extend the life of your laptop. Hit the play button now and let's get started!
DISCLAIMER
This video intended for general information only. We will not accept any liability for damage or injury caused while following this guide. Any reliance you place on such information is therefore strictly at your own risk.
AFFILIATE PROGRAM
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
#howfixit #fixit #guide #diylaptoprepair #techrepair #doityourself
![[TH] 2024 PMSL SEA Finals D1 | Fall | ยิงต้องโหด ให้เหมือนโกรธกันมาก่อน](http://i.ytimg.com/vi/OnTdfGySmds/mqdefault.jpg)
*For more info check out the links in the description*
I bought a used razer blade 15 2018 a year back and I finally replaced the thermal paste in great confidence thanks to your video.
The old paste was so hard that it just crumbled off the CPU and GPU.
Replaced it, put everything back together and now I'll see how she goes :)
Great tutorial, thank you very much 👌🏻
PS: Also took the chance to clean it from old the old dust
hi
how can i know,how strong i have to turn the screwes of the vaporchamber? now what i mean? my enlish is bad,sorry
i will repaste too,,but i dont will break the cpu and gpu when i make the screwes in.....
and wich thermal pads i have to use?
(i buy 2 packs from amazon,blue ones,but they are stone hard ..and only have 7w/...)
wich ones i need,,can you help me?
and,it is very difficult to loosen the ribbon cable from display and wlan? i never do this befor..
i got this laptop free, from a friend,,so its my first pc at all 🙂and its very difficult to understand how it works ;-)
its the same machine like yours i think,,its a blade15 from 2018,with an i7 8750h, 16Gb ram, gtx1070max q,144hz display 1080p)
also i will undervolt this machine,but my bios v1.03 is locked,,throttelstop or xtu dont work 😞.any ideas?
only i turn the turbo off,because temperatur,,in games i dont feel any difference,,maybee with other games in the future(i would like to play "cyberpunk" , "escape from tarkov" , "detroit become human" , "asc vallhalla" , "sons of the forest" , "rust" and new ego shooters,,but i dont know that i buying this games,,because i dont now they run on this 1070max q or not" ? )
greets from germany,,,markus
Thanks for this video man! I have exact the same model. After repasting, my CPU temperature is now 10 degrees lower on idle, from around 6x to 5x C (sometimes even below 50 C). I also replaced some thermal pads because they've already dried.
Amazing video thank you very much. Had to replace my swollen battery so I decided to also clean my fans and do a repaste and I copied this exact guide!
Temps before when playing a game such as WZ 91C and after gone way down to 75C.
this is my exact problem, temps clocking out, I'll order some thermal paste asap
how did u replace the battery? mine is also bloating
@@sebastian-eq4tp Yes most definitely, I used Artic MX-4 Thermal Compound... works a treat!
Where did u get ur battery from? looked everywhere
@emmxttv Just got mine from eBay, and I wanted to get Conductonaut but shipping time takes too long. I'm just gonna stick with Kryonaut for now.
Also another thing with battery, make sure it doesn't get full charged! When its charging while at 100% this KILLS the battery super quick. Look up "how to not keep laptop battery fully charged" and you'll see what I mean
thank you very much... amazed by how much cooler my laptop is running. no issues anymore!
Great video, cheers. Only difference between my model and this one was the spring loaded screws and the camera cable was pasted over the RAM. But is basically the same. So don't be put off if you see a big copper plate instead of the matt black one shown above!
Great guide, thank you! Followed this after I got an RB and it was throttling like crazy when playing games but after this guide it feels like a new computer!
A great guide, I have an Omen 15 and the copper heatsink plate had a lot of oxidized sort of staining from the compound. I found lemon juice seriously refreshed the surface and very noticeable results!
Thank you mate, it really help me a lot and we are in 2023
Thanks. I just cleaned my fans, and when I removed each I found mold on the fans and a year’s worth (my laptop’s a year old) of dust and mattress/blanket fibers on the inner-facing side of the fans, which I promptly blew off.
Have a quick question. What is the thickness of those thermalpads stik to vaper chamber 0.5 or 1 mm ?
Perfect, while it's nerve-wracking it's definitely worth doing it yourself to save some cash and learn how it all works. Thanks for the detailed overview and your confidence in handling those tricky niggly bits helped me to strive on!
Thanks. Needed this guide to repaste my blade
I did like you and when I press on power, I heard a sound like a flash, It smelled like burning but I dont see what was burned and my pc won t turn on anymore :'(
Thank you for the video, it really help me to change the battery on my Razer blade.
Thank you. My battery was bloated and idle mode sometimes the temperatures were at 60 degrees.
I will never buy a Razer Blade again.
you can unplug the battery and just use it on power if u need
@@BluePoloYT I did and I bought a new battery for 55 USD (original and new).
And at the same time I also added new cooling paste.
Now the temperatures are 40 idle and 70 when gaming. So 20 degrees lower.
@emmxttv take the bottom off like this video, use "canned air" blow out the fans and fins (take the fan out to do this) i did this last night on my razer blade 15 advanced. boosted my clock speed on a bench marck by 420MHz. I have thermal paste coming in today so im hoping i can get it to run even better with the new paste. (also i run on a cooling pad that i also just got. works great (maunualy turn the razer fans to max, turn the cooling pad on max) run the intel extreme tuning bench mark (2.0) then power down clean it and try it again should be better. the new thermal will also help too. but i can let you know more about that by friday
@@jacobfaris3116 How'd it go?
@@batboyshark worked great actually, I cleaned the fans out, re-did the paste, I definitely want to replace the thermal pads too after seeing the ones near the exhaust (all dried out). Since the new paste I can run my games higher res and no frame drop. I was running 7 days to die at 4k 21:9 at 59 fps (55 99%) and overwatch 4k 21:9 at 115-130 fps (my 4k screen tops at 60hz) but med res
hello, is 2018 one similar to 2019. cuz i wanna dissamble my fans too.
Is this the same as the 2019 version, I don't find a video about it
Thanks a lot! Just what I needed.
This was a great video, unfortunately the screws on the cooling system would not budge, to the point where the correct screwdriver damaged the screw.
hi I show 2 time of pads there what is the difference dark grey and light grey is w/mk?
I did the same, just forgot to unplug the battery-motherboard cable before the operation. now my pc is not turning on. Even blinking light or the fans are not working. No power. What should i do?
where can I buy washers for my razer? I often open my razer for cleaning but the plastic base that handles the WASHER for the SCREW at the UPPER MOST RIGHT CORNER gave out I need to replace it to fully snap the bottom cover
I have same issue razer 15 2018 model making bad noise, I opened it clean it is a bit better but still makes bad noise. Overall is good laptop and expensive don't understand after 7 months to have this issue.
one of the fans is broken, if you press on the fans and it wobbles then its loose and gotta replace it
I tried following this, but couldn't even get past 1 minute before my screws became stripped. Now I can't get the screws in or out of my computer... Any tips?
help, spark while removing battery cable, now it wont turn on
Oh shit, pc becomes thrash..
Possibly damaged cable or not letting the connection set in all the way in and correctly.
Batteries are about 80 dollars online
Not that bad
Idk how to get that mobo wire out
Hi all, I really need help, my razer blade just dead I hv Rz09 0238, bought in 2018. I opened and changed the battery as it's really inflated. Nevertheless it's still won't turn on, no power. Nothing wrong with the Power Adapter. I was like thinking it might be something wrong with the fuse it's probably has blown up due the heat?? I don't know how to change the Fuse myself but would love to try if only I know what to look. Any advice?? Thank you in advance.
What type of screwdriver do you need to open the back?
The only problem is when you change thermal paste on a Razer Blade Advanced you end up bending the the Vapor Chamber.
This literally just happened to me. Hoping it doesn’t do major dmg
@@XxRiekXx Yeah that is why I never attempted it. I saw other people online bend their heatsink. I am sure I could do it without bending but you also lose your warranty when you do this so it is not worth it.
@@cemsengul16 this was a 2018 laptop at the time of your comment, the warranty was expired by then. It is worth it when your laptop is constantly mid to max fan speed trying to breathe. This repaste and thermal pad replacement helps a lot (he should have done the pads as well).
@@BTCKYLE Makes sense then. I am going to use PTM 7950 on my laptop the moment my warranty is over.
is there any way to 'clean' the fans using a can of compressed air and without removing the back cover of the laptop?
I'd recommend removing the back at the very least, just so you can actually remove the dust rather than blowing it around inside; but yes, it'd be better than nothing
thanks dude
What would be the best brush to use? Any UK links?
Thank you!
Hey, I broke one small thing beside the gpu. Does it damage the gpu 🤔
@emmxttv it works fine.
I traded my 2019 hp omen with 1650 an i7 9th gen 60htz screen for a 2018 razer blade 15 with 2080 max q an i7 8th gen did I get better deal is 2080 max q better then the regular 1650?
I mean you should’ve just kept the omen but if you like razor and wanted one of their laptops it’s not a bad trade, just take care of the razor and optimize your settings to make sure it doesn’t overheat and shit
@@Alexdebunny I found it was impossible to game on the razer temps got up to 115C on cpu so I sold it an I found a new in box 2020 hp omen 1160ti an ryzen 7 4800H 144htz screen for 485$ off local OfferUp app the temps on this omen don’t reach any higher then 80C I’m impressed an ended up making a profit of that razer don’t think I’ll buy one again
WRONG way to apply thermal paste, buy some acrylic sheets and cut one to the size of the gpu/cpu, depending on the cpu gpu chip size you may need to lay down a 'worm' or an 'x' pattern from the thermal paste tube. Then place the acrylic sheet over the cpu and push down on it, the acrylic sheet is transparent and will give you and indication of how little or too much paste you are using to cover the chips completely. Using a tool to spread the paste can lead to micro air bubbles being present in the paste when you lay the heatsick/vapor chamber over the top causing hot-spots on the cpu/gpu and thus leading to a shorter life and higher temps AKA thermal throttling in games. The paste comes vacum packed in the tub, if you appy it correctly to a surface and then mate the heatsink to it there is no need for 'spreading' paste and it reduces error.
Edit: you want to start with as little paste as possible as most thermal solutions dictate that the amount of paste between the cpu/gpu and heatsink should be around 1 micron thick, you should be firmly (but not too firm) placing the acrylic sheet over the area to ensure that the 'bead' of paste is not going over the edges as this is wasted and gives no benefit to thermal transfer.
OR you can just use the heatsink/vapor chamber to apply it, secure it down with the screws to get an accurate indication of pressure applied to the mating surfaces and remove it, if it looks good just wipe away and start again fresh ensuring you take a picture of each application of paste to match the last one, the last hopfully being the most successful attempt. This is how you avoid putting your laptop in a worse state than when you came to it.
Having applied hundred of tubes of thermal paste in my time, I can tell you that your overthinking it way too much. Spreading is fine, it genuinely will not cause an issue and is less risky when applying directly to silicon. also there is zero reason to worry about applying a bit too much thermal paste, as long as it's not conductive to electricity
Hi,
Maybe you can help me a little bit:
I have the same laptop,,but i have any issues.
No new nvidia driver works..only the old 389.28 from 2018...maybe you now why?
My bios is blocket for undervolting,,but its the first bios on this pc(v 1.01)...why is it blocked?
I see lot of people there undervolt exactly this laptop.
The ssd need a thermal pad or something(because it is very hot on gaming(over 90 degree)and sometimes i have issues with that.
Also the 4 little blocks you can see under black metal,,in range of the display cable,,they needs pads too?
I become the laptop from a friend,,its not new,,also lot of this little black stickers to fix the cables are not there...
Can anybody help me or give me tips?
I thanks a lot..
This video contains CPU/GPU undervolting on a laptop - th-cam.com/video/1PTRCc_BRtQ/w-d-xo.html
anybody knows the milimeters and shore of the thermal pads?
hope for answer
i also will replace the paste or put lm in.
how strong must be the screwes from the heatpipe?
you dont spread thermal paste yourself
See my comment above...
You do when applying directly to silicon
Очень важно! Переводите этот ролик на Украинском языке плиз
Cant understand a word