STOP Throwing Away Aerosol Spray Cans With BROKEN Nozzle Stem Tips! How To Save And Fix It! DIY
ฝัง
- เผยแพร่เมื่อ 24 พ.ย. 2023
- ITEMS I USED ON THIS VIDEO:
- SAVE-A-CAN Nozzle - saveacan.us/
- 7/64” Drill Bit - amzn.to/3Rf6Gv2
- Aerosol Can Trigger Gun - amzn.to/3sRXG5O
- Spray Foam Replacement Nozzles - amzn.to/46tJspu
- Wire Cutters - amzn.to/3QR0TKR
- Aerosol Spray Tip Red Straws - amzn.to/47u4ndk
- Compressed Air Aerosol Duster - amzn.to/3MVRznN
SHOP MY ONLINE AMAZON STORE AND CHECK OUT ALL THE TOOLS I USE! www.amazon.com/shop/genevo9
On this video I will be showing you how to STOP Throwing Away Aerosol Spray Cans With BROKEN Nozzle Stem Tips! How To Save And Fix It! DIY
DO YOU HAVE QUESTIONS ON YOUR HOME REPAIR OR DIY PROJECT? GET TIPS, ADVICE AND ANSWERS! BECOME A FIX THIS HOUSE MEMBER!
Become a FIX THIS HOUSE Member by clicking on this link: / fixthishouse
Please Subscribe To Our Channel! / fixthishouse
FOR BUSINESS INQUIRES SEND TO:
FIX THIS HOUSE
P.O. BOX 2511
BREMERTON, WA 98310
UNITED STATES
FOR BUSINESS INQUIRES EMAIL ME AT:
fixthishouse1@yahoo.com
DISCLAIMER:
Videos produced by Fix This House are provided for informational, educational and entertainment purposes only. Please use SAFETY precautions when following the tutorials on these videos. Viewers doing projects at their own home are doing it at their own risk and Fix This House cannot be held liable if they cause damage to their homes or injury. Fix This House cannot claim liability with all applicable laws, rules, codes and regulations for a project. Always stay informed of your local building codes! Happy and SAFE renovating!
DISCLAIMER: This video contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission.
#aerosol #spraycan #diy - แนวปฏิบัติและการใช้ชีวิต
ITEMS I USED ON THIS VIDEO:
- SAVE-A-CAN Nozzle - saveacan.us/
- 7/64” Drill Bit - amzn.to/3Rf6Gv2
- Aerosol Can Trigger Gun - amzn.to/3sRXG5O
- Spray Foam Replacement Nozzles - amzn.to/46tJspu
- Wire Cutters - amzn.to/3QR0TKR
- Aerosol Spray Tip Red Straws - amzn.to/47u4ndk
- Compressed Air Aerosol Duster - amzn.to/3MVRznN
Thanks a bunch for the tips. I wish I had known about the Spray Foam Replacement Tubes before I threw out a perfectly good can that was three-quarters full.
Great video, They should make those nozzle stem tips out of the same kind of plastic those clear packages for products at Costco are in, like SD Card packages that you practically have to use tin snips to open. The plastic that the spray can nozzle stems are made of is very brittle, I had the stem break off a can of carburetor cleaner bust and it only fell about a foot and a half and landed on the spray nozzle
If you have a can with product but no pressure left, I have used my air compressor and a blow gun with a soft rubber tip to re-pressurize the can. Just remove spray tip, place rubber nozzle from blow gun over can valve tightly and give it a couple good bursts! You will feel it when you get it right its like blowing in a drinking straw. Then just put the nozzle back on and boom it should spray again! Don't over do this and you will need at least 60 psi or so to overcome the can valve but I have had great success with this! Keep in mind that liquids that cure in air like paint you should probably use quickly.
Mines broken down into the can.
Thank you so much man this was the exact same problem Im having right now with a broken tip. I actually had a nozzle for the phone the one you're talking about ordering through eBay and I didn't know what it was for and I literally just put it away about 5 minutes ago I'm not thinking it could give me a little bit of help but I can't wait to look through your other videos cuz I'm always working around the house looking for ways to save me a trip to the store
Great content. I have a few cans with broken stems, so I have some experimenting to do. 👍
Please let me know how it turns out 👍🏽😊
Thank you. I love the tips.
This will work for cologne bottles also 👏👏
I save Rustoleum spray can tips when the can runs out . I invert the cap , and put a drop of engine oil in the tip . When a Rustoleum can tip clogs , extras are available .
Thank you for sharing my friend 🙏🏽😊
Places like Amazon also sell packs of brand new spray tips, I bought a variety pack with a dozen each of the most common spray tips, I been using a bunch of them to revive old spray cans
That can gun is my go-to friend for easy use on all my aerosol sprays.
This was an eye opener…thank you!😮
I’m glad I could be of help 👍🏽😊
Good video. I’ll have to try one of these on the varnish can I bought and lost the top sprayer.
At $18.99 for Sav A Can, there are not many cans worth saving.
It's meant to be reusable so it's an investment
Seriously, how many stems have you broken in your lifetime? I can say I've broken NONE. Yeah for $19 I can just go out and buy another can or 3.
I did that today ❤. Thx
Thanks fr the tips. I'll remember this!!
You are very welcome! 👍🏽🙏🏽😊
Dude youre freaking awesome!!!! I have a few spare sprayers for my cans when they start acting up. And sugar i have 2 of those sprayer attachments. I have a condition called depuytens contracture and it affects me using aerosol cans. Thanks for the cool tips!
Good idea thank you
I was just getting ready to put a comment about safety glasses when you mentioned it at the very end. Thank you very much for that. A lot of TH-camrs have the bad habit of not using proper eye protection and actually present themselves as a bad example of safety practices. Thanks for your dedication to safety
THANKS SO MUCH HAVE A GOOD DAY
Keep up the excellent work and i wish you a million sub.
Thank you so much for the love and support my friend! 🙏🏽👍🏽😊
Thanks for sharing.
You are very welcome my friend! 👍🏽😊
Great hack!
I boiled my nozzle straw to get the gunk out of it. It softens it and then you can stick a strait piece of metal that's longer then the straw and push it out. It definitely worked, and to prevent it from oozing back into the straw, I put a small screw into the stem. Screwed it in just enough to stop the pressure from oozing . When I need to use it, I remove the screw and attach the clean nozzle straw.
Thankyou a lot it’s help Thankyou
I think that weight is 4/10th of an ounce and not 4 ounces.
Thank you i was gunna comment this lol
Thank U sooooo much
Cool 😎 !
sweet!
I saw a yt short where he used a caprisun straw as his adapter. Just a lil helpful alternative if you don't have the wd40 straw
Thanks for the tips! :) Seriously, but I'll intend the pun for fun.
Does the Save-A-Can nozzle come with different spray pattern for paint spraying?
great vid., i wanted to buy a Save A Can Tip but they only sell by 3 of them at the time almost 50 bucks! hell no.
deoxit, freeall, some other suppllies like paint cans @$12/can @ HD, also deletes that irratating intagrated straw that wastes alot.
If you use acetone it will clean the spray foam out of the tip of the can and straw
Thank you for sharing! 🙏🏽👍🏽😊
What if it is broken all the way down into the hole. When it's actually even with the hole in the can? Can you still use the drill bit to fit a straw inside of it?
4:20. Weights is less than half an ounce. Missed the decimal. Thanks for highlighting the product though.
I just decant the paint and use a small touchup sprayer.
Acetone will clean the expanding spray foam from the nozzles.
I think you maybe the best subscribe I happen to find due to one of your TH-camr friends. I can remember which one though.
Thank you so much for your love and support! 🙏🏽😊
Interesting tips, thanks.
Spray cans suck in general. I'm sure manufactures could fix the issues. The straws get lost or are the wrong diameter. 🙁
Great video I just ordered a nozzle for my full can of carburetor cleaner with broken nozzle cost me $10.00 if this save a can nozzle works it's a money saver I do buy a lot of carb cleaner.
Como lo pidió y donde
I just received the save a can nozzle works great. @@guadalupemoreno7966
I have a hair spray that won't spray like it should. The tip is not clogged. I've even tried a brand new tip, and it still doesn't spray correctly. I've also tried pressing down on the tubing, and it comes out perfectly and at full force. I'm thinking that the tubing must be bent inside. What can I do to salvage this can of my favorite hairspray??
Where did you get it. I cannot find it online.
Need help with rusty bolts I cannot unscrew from an outdoor flower box. Any tips or tricks…suggestions? Thanks
Get a small jar or container of coconut oil. It has to be the oil that is solid not liquified. Then coat the bolts with alot of the oil using your fingers to make sure it gets onto all the grooves, nooks and crannies and let it sit over night. Then try to Remo e them if it's still not loose use a torch to heat it up and let the oil melt and then coat it one more time overnight. Heat it up again, and they should come right off. If it's real bad and won't come off, use baking soda and vinegar. Get a small bowl of baking soda and add water but just enough to make it a thick paste that you can use to coat them. Then, take a spray bottle with vinegar and spray it. It will foam up and keep repeating til the rust starts coming off more and more, then use the coconut oil. I promise it works. Just have to be patient. One last trick is to take a potato and cut it in half. Use the cut sides to screw them onto the bolts or nuts. Keep turning the potatoes back and forth a few times, then let it sit. The potato will remove the rust, but this takes a few times and a few potatoes. After potatoes add. Coconut oil and bam, they will come off. Update me and let me know if any of this worked for you
Yahoo! This can save about 60 bucks!
When I have a can that has lost its pressure, I make a slight hole at the top and depressure the can. Once the pressure is down, I enlarge the hole and pour the contents into a small glass jar. I have an airbrush, so if I need to spray paint the particular color I can use my compressor and the airbrush to use the product. Most of the times I did this for model painting and I got the best application of paint in comparison to the mist from the paint bomb can. Wd40 or other lubricants that are similarly affected, I just open the can and dump it into a jar and use a paint brush to apply to the surfaces that need treatment. I never waste a spray bomb can unless I have to do it.
Great idea, that's what I do with brake cleaner and carburetor cleaner and put in a jar to use for brush cleaner when the spouts break off the cans .
WOW
I think that on those occasions it is better to take the paint out of the container and use it with an air gun.
hilarious that i ended up here after bringing home two full but broken o'reilly brake cleaner cans from work lol
4 oz. of brass is about the size of a golf ball.😅 Thanks though.. I'll have to get one.😉
Hehe 🙃
Those trigger guns are awesome. I've been using them for years, and they make long projects like painting so much easier.
That WD40 trick is very cool. I like those spray heads, and it never even occurred to me that they could be removed and put on other cans.
I have an aerosol can of insect spray. It has the spray cap. And it has another cap that comes with a straw for crevice spray.
I used the cap with the straw a couple of times. Now the cap with the straw doesn’t reattach to the can.
The regular spray cap still reattaches no problem.
I called the company. They sent me another cap with straw which still doesn’t reattach to the can.
I’m confused why the spray cap still reattaches. But the cap with the straw does not.
Heh... the spray valve is so-so but the great stuff thingies are a must :-)
I just tossed a new can of gap filler because the spray nozzle snapped off.
I always invert the can when I'm done until no more product comes out to prevent there being anything to clog the nozzle.
What if you don't have that tip?
You are supposed to file the tip flat or cut it clean and even with a razor blade
Shoee..doggy!
🤝
👍👍👍👍👍
Thank you so much! 👍🏽🙏🏽😊
tip is about 4/10ths of an ounce eagle
I can’t buy this, the PayPal link doesn’t work. Suggests that the company is having issues. I don’t use Venmo and I am certainly never paying for anything by direct bank transfer. Available only on the company website apparently.
What’s with the glove fingers not all the way in!! 🤔
Um … it weighs a little less than 1/2 an ounce (4/10ths)
This is pretty useful because a lot of these products are pricey and throwing the stuff away is aggravating.
This not dangerous load?
Broken tip should be cut level 90 degree.
Then the tip will screw in solidly no mess.
thats alot of work
That's not 4 ounces, That's 0.4 of an ounce (4/10ths of an ounce).
I clicked on the link provided and it took me to a dangerous website blocked page . what now?
😮
I call that stem fixer a bs. Just get another can. Or just drill it and decan the paint.
No thanks
說話太多😢你做好我們就已經明白了🎉
you can buy a new can for less than $13 for this nozzle adapter.
How about long term? What if you have multiple broken cans in the span of many years?
Thats 0.4 Ounces lol
🤑Over $18 with tax and shipping. Save a can of cash instead!
You used on different product bro .. don't b,s !!
Don't waste your time and $....just buy a new can of whatever.
🥺
Throwing out a perfectly good can of whatever is a waste of money.
Yeah, easily said and done when you have money to keep replacing cans. Single parenthood doesn't allow for replacement of much if anything, so I always find a way to fix the stuff I have. I love this video. Good job.
@user-yg9jk9ty3k I actually don't drop cans. I have a few that I bought and the thing broke off after first use. Not only that, I have 2 girls and the amount t of hair products and perfume bottles with broken nozzles is unbelievable. I have so many cans and bottles that are broken and to replace e them would be outrageous especially the perfumes.
It’s early Sunday morning or Friday night at 11, you live 35 miles from a store, or maybe out at the ranch, you use a lot of these in your work, money actually matters and some of these products aren’t cheap, you just need to squeeze out a little bit more and don’t need a whole other can, and you’d prefer not to dump a bunch of chemicals in the trash.
There’s a half dozen legit reasons not to just toss it in the trash and “go buy a new can”.
Trolls.
Couldn’t find a bigger angle grinder?!? 🤣🤣 3:32
Four ounces. 🙈
HOW TO GET IN CANADA, I ASKED IF SHIP TO CANADA. NO ONE BOTHERED TO EVEN ANSWER ME, and I KNOW they READ MY MESSAGE