How To Manual Swap A g37 Sedan pt. 1

I did my best to describe what i could , i never been behind camera like this so bare with me its a first for me , the next video will be a test drive/update , hope you guys enjoy ! Message me for any more question on instagram !
...
(@37minutelate) on instagram if the link doesnt work lol

[@jadorekalia7029]

You explained urself well enough to make me wanna manual swap something

[@Yomomsaltima]

And your gonna do it urself from this video?

[@Not_george_michael]

Ive had my g sedan swapped for a few years now and didnt do the trans wiring. Thanks for explaining what to do and how to do it. After all these years you figure someone would have made a forum how-to post by now

[@mouf237]

man i love these small channels binging these

[@IPL_VIC]

That thing by the e brake is the yaw sensor. You need to relocate that further up closer to the shifter. There’s a comprehensive guide on how to do the swap now on a forum and a new video from a guy that did it to his sedan aswell

[@IPL_VIC]

I don’t think you can get away with just extending the auto drive shaft. They have different connectors on both ends of the drive shaft. The part that goes into the transmission is short on the auto and is blocked by some black metal piece. I haven’t done the swap yet but comparing them side by side that’s how it looks. The manual one has a longer connecter on the side that goes into the tranny. I believe you will need a manual transmission driveshaft regardless. Also the rear differentials are different for a reason. Instead of having to cut that nipple on the auto diff, you could swap for a manual one and fit just fine. There’s also a big ratio difference in the manual ones. It’s a 3.69 rear gear and 3.3 or 3.4 for the auto. To be oem as possible i would just go ahead and get a manual rear diff

[@mattmitchell717]

You have to mark the pinion nut before you take it off and torque it back to where it was unless you replace the crush bearing. Hitting it with an impact will kill it every time. I did the same thing a few years ago and it lasted about 20 miles of a track day.

[@christianaguilar9572]

How much did it cost for the whole swap?

[@RyeCarter]

The G is clean bro 🤤 respect

[@matthewpittmann7073]

I bought a trans that was locked in gear also and the seller was able to take the black cover off and unlodge something and the trans was great when I installed it. So don’t throw it away yet

[@GeloNegron]

Nice hair brody! 😂🤙🏽 basically looking at this as a nice video to have side-by-side if I end up having to do this… my original 2007 V36 Sedan 6MT was rear ended at a red light, its hard to find these G35S in OEM 6MT (it was order only at the dealers), so figured if I cant find a replacement I’ll get a fully loaded S auto and do a CD009 swap and continue where I left off on mine.

[@real_ultrajoe]

Just the swap the differential out put sensor in

[@sashak7541]

Thanks , it helps a lot with the swap

[@mobanks544]

Yo been researching this for a while planning on getting started soon all parts first

[@AndrewSegura-s5q]

For the transmission wiring harness for the neutral and reverse switch does orientation matter? Obvious grey and yellow together for the neutral switch but does it matter what slot I put them in

[@stuie1010203]

This shit is gold my guy. Been contemplating if I should do it to my sedan. It’s my daily and the cvt going out at 100k

[@sp3ct0r72]

G37 don’t come with CVTs

[@zzz3235]

@@sp3ct0r72 🤣

[@ahmeddjumaa6656]

hey love that video you gaive all the details im just wondering will this swap list fit the g35 sedan 2008 or should i go with 350z 2008 setup im new in the vq platform

[@ronwood9706]

Yeah u can all universal

[@sergioverduzco8295]

Good work boss

[@tylerhorswell5978]

Is this awd or rwd

[@ChristianGarcia-vb5ok]

About how much with it be? Ending excluding labor

[@rbg_industries]

Did you get new gearbox man

[@karenselene3120]

so did you buy 2 pig tails for the manual transmission sensors?

[@37minutelate]

Yes

[@sashak7541]

Do you need mt transmission bolts or I can use the original ones?

[@edwardstevenrivera7857]

Buy 2 same harness wire?

[@abrahamarredondo82]

I’m in 239 too fam 💯

[@sharkfinsoupp]

Ayy same

[@RuthlessTwinz]

Wats the trans you got wat it called so I can swap mines

[@iansmith7922]

You still have that auto tranny? I’ll buy it if it’s good

[@josefernandoescobar6395]

Hey men ill like some help i want to swap manual my 08 g37 and i want know if a hr manual transmission works

[@tylerseefeld3464]

I wanna put a hr manual with an hr in a 08 g35x because I crashed my 07 g35s, know if that would work? Stock g35x is a 5 speed the hr’s is a 6 speed

[@CTSV6.0-G37]

Isn't the 7speed faster? Or is it just preference?

[@qgp]

preference

[@37minutelate]

Apparently having a manual transmission makes these cars faster but dont quote me on that lol

[@nesansiva3463]

give NoPolicy credit

[@Boosted_OG]

What about the ECU

[@37minutelate]

You dont need to change nothing with the ecu , all that need to be done is the simple wiring for tranny sensors

[@kev_g37x]

Will this work on awd?

[@seshww]

no. you will have to convert it im pretty sure

[@tylerseefeld3464]

@@seshwwconvert it to what? I wanna put a hr manual tranny with an vq35hr into a 08 g35x because I crashed my 07 g35s, know if that would work? Stock g35x is a 5 speed the hr’s is a 6 speed

[@abnervega2566]

Type shi

[@Daniel22777]

Looks like a pain in the ass 😆😆

[@80FIVEVLOGS]

Still got that auto tranny?

[@Inmysightstarget]

Think you need to fix the dumb looking exhaust tips and Walmart Chinese made wheels and the dumb camber

[@geezeus3446]

And you gotta get rid of that 350z. Ole computer mouse face ahhh

[@Inmysightstarget]

@@geezeus3446 wow such a comeback lol lol lol that must have hurt the brain lol

[@juanjog375]

Bro te escribi por instagram 👌