Squaredrop camper project | Swing away spare carrier fabrication
ฝัง
- เผยแพร่เมื่อ 21 ต.ค. 2024
- #squaredrop #camper #offroad #4x4
As always. Please take note that I am not a professional, and I simply do my DIY projects at home under the advice of friends who build trailers for a living. I'm always open to advice and constructive comments.
In this first clip I have a crack at building a swing away spare wheel carrier for our squaredrop. I spent quite a lot of time researching 4x4 wheel carriers. I used a combo of 2mm wall SHS in 25mm, 40mm and 50mm. I also used quite a bit of 3mmx30mm flat bar.
Thanks for watching
Where did you get your rear door seal? Great work! Your build is similar to mine.
Hi. Thanks for watching, and good on you with building the trailer. It's certainly a rewarding project.
I have a good mate who builds trailers for a living, and i bought the seal from him. However, i do know that (depending if you are in AUS) there is a company that i know who sells the stuff. It's called 'J Seal' and i know that Trailer Parts Direct sell it.