This shifter is only temporary While it is still fwd. The D series awd will use cable but for the time being until it’s AWD transmission is installed this will work!
I did the same to my civic and the center consul fit perfectly fine. I think it’s just integras… but it definitely feels good and looks good too… I try following other videos, but none of them said anything about the secondary shift linkage that goes from the tranny to the two 12mm bolts… I came to realize after that I didn’t need it so I ended up taking it off so now I just have the shifter link to the gear link… this video definitely does a good job explaining for those that are installing those shifters for the first time 👍🏼
I believe ur shifter was mounted backwards, I mounted mine facing the opposite way and I was able to use the lockout feature, either way they’re a pretty cool design that copied the full race brand but those were very rare even when they first came out with them it took me 6-8 months to find one. Since then I found this one and the jackspania version and they’ve been pretty good so far. One thing to note is that these work crispier with some race version mounts or full billet solid mounts along with some traction bars and a subframe H brace💪🏼
I love it man! God bless. I'm curious about running without an o2 sensor which it looks like your running. Are you just staying out of boost to get to where you need be?
Thanks and this isn’t the final setup. That exhaust pipe has a o2 sensor bung on the bottom but it will have a different exhaust and we will have a base map tune on it anyways to be safe.
Can u do an update on the shifter like how ita held up after a while I wanna purchase this shifter for my eg hatch but idk if it's worth it or not when I have brand new shifter booshing and a new short throw shifter installed already
You can awd swap a lot or normal fwd setups but they have to have a kit for it to be a bolt in process. Like civics, Rsx. Ef hatch, ek hatch, eg hatch, coupes and sedans and such they make awd kits for them.
This shifter is only temporary While it is still fwd. The D series awd will use cable but for the time being until it’s AWD transmission is installed this will work!
Where can i get one
@@reachmorelove4293linked in the description
@@reachmorelove4293buy from any other company. Bullboost is the worst.
how’s the shifter holding up?
Your a real man bro God bless you too I appreciate you take care from california to your front door my man stay blessed💪🏾
Thank you for the support! God bless you! From Central Texas to California we salute you 💪🏻
Learned something new today !
Didnt know how that shifter worked !
Nice build
Thanks and yea super easy to install too.
I did the same to my civic and the center consul fit perfectly fine. I think it’s just integras… but it definitely feels good and looks good too… I try following other videos, but none of them said anything about the secondary shift linkage that goes from the tranny to the two 12mm bolts… I came to realize after that I didn’t need it so I ended up taking it off so now I just have the shifter link to the gear link… this video definitely does a good job explaining for those that are installing those shifters for the first time 👍🏼
When i done my 5spd swap in my ek, I just used sound deadner to cover the hole instead of metal. Good luck on the house hunt and god bless
Yup that’s what I usually do as well haha
I believe ur shifter was mounted backwards, I mounted mine facing the opposite way and I was able to use the lockout feature, either way they’re a pretty cool design that copied the full race brand but those were very rare even when they first came out with them it took me 6-8 months to find one. Since then I found this one and the jackspania version and they’ve been pretty good so far. One thing to note is that these work crispier with some race version mounts or full billet solid mounts along with some traction bars and a subframe H brace💪🏼
yea!!!!! hondas and the lord. Spreading positivity!
I love it man! God bless. I'm curious about running without an o2 sensor which it looks like your running. Are you just staying out of boost to get to where you need be?
Thanks and this isn’t the final setup. That exhaust pipe has a o2 sensor bung on the bottom but it will have a different exhaust and we will have a base map tune on it anyways to be safe.
Can u do an update on the shifter like how ita held up after a while I wanna purchase this shifter for my eg hatch but idk if it's worth it or not when I have brand new shifter booshing and a new short throw shifter installed already
Shifter looks good n there. Wosh i could find the stuff for manual swap for mine maybe then id get workin on it again lol
Looks great! Where at in North Texas are you thinking?
Paris Texas area
@TexasHondaChannel My dad lives in blossom, that is a beautiful area.
So does this AWD setup work on all models or can only certain model utilize it? This is going to be a tough little car for sure.
You can awd swap a lot or normal fwd setups but they have to have a kit for it to be a bolt in process. Like civics, Rsx. Ef hatch, ek hatch, eg hatch, coupes and sedans and such they make awd kits for them.
Great video
Hey I got a question, b16 b18 b20 valve cover are the same ???
That is something I’m not exactly sure of. I know some is interchangeable but I don’t typically do b series stuff
For the b series ,
vtec valve covers are the same .
Non vtec are same .
Vtec is not interchangeable with non vtec
@@jonatans.5080Learned something new today.
where at in north tx?? im in wichita
I used to live in Wichita, Hutchinson and Great Bend kansas. I been all over there lol.
@TexasHondaChannel my bad I ment to put wichita falls tx lol
@@TeddybitesOh 😂 gotcha! Makes a difference to me haha. Maybe not someone who lived in a different Wichita lol. By paris Texas
Good luck house searching 🙏🙏
"Don't make a merchant of my house" gotta love hypochristians
???
Noice!
do you have to have solid engine mounts for this shifter?
short shifter??
you weren't centered onthe console. 🤦♂