Put a M☆ Carbo trigger kit in it and you'll have a awesome pistol. Trust me I installed one in my Micro 9 TFX Pro . Trigger pull reduction was over 50%. I can shoot it almost as well as my 4" Kimber Aegis Elite Pro 9mm . Keeping in mind I have polished all contact areas on that trigger group as well , but the M Carbo kit is new trigger Springs and metal finger tab plate that makes a huge difference . Best improvement I could do since the factory 7 lb trigger is way to heavy in my opinion
I fell in love with the looks of this gun so I bought it and also ordered a couple of extra mags from Kimber and like your video says it does take a different mag than the other Micro 9s. I love my Rapide Ice micro 9 and now I want the matching full size to go with it's little brother. But I love the look and feel of this gun and I have had zero issues with it. It was a little pricey but I would buy it again if I had too. Very sweet pistol. Liked your video but I didn't even research for videos of this gun because I own other Kimbers and had full confidence that this pistol would live up to Kimbers standards. 👍🏻
Excellent review, I appreciate you putting this out! I got mine without knowing it was a special edition and bought an 8 round mag to boot, and was disappointed and confused when it didn’t fit. Happy to know why now!
I really appreciate your video. I haven’t found any other reviews on the Rapide. I just took mine to the range for the first time today and it cycled my range and defensive rounds without failure. Now that I’ve seen your review, I’m confident in my decision to start carrying daily.
I really love it. It is an actual pleasure to shoot, and comfortable to carry. By far my favorite pistol I own now. I have become a true Kimber fan, and am looking at other models to own.
If this is received well, I will do reviews for my other firearms, and maybe others I get ahold of. Most of my vids have been around full-auto content...but I would love to get into this part of it as well.
Yeah, the 6lbs trigger is standard in a Micro 9. Honestly, I wouldn't want a new gun owner to have a light trigger...particularly on such a small gun. I am considering the same kit for mine...they advertise at least a 40% reduction...and many get as low as a 3lbs pull.
mine measured out at 10 pounds over 5 different tests. Friendly LGS called Kimber, they said it was way too high, and send it back. Gave an RMA and pre-paid UPS label. Got it back today, it's still 8 pounds, and it's too damned heavy.
Just seen the new micro raptor pro with crimson laser for 1100 nice looker but a bit steep but I payed 600 for my micro 9 s/s about 6 months back. There`s a vid on YT where a guy shows with just a little work you can put Sig mags in a micro 9.
Picked mine up for $839.99. Trigger pull was terrible at 10 pounds. Sent it back to Kimber and they replaced the sear and trigger assembly, adjusted the extractor, refinished the barrel and chamber, polished the feed ramp, breech face and firing pin housing. Trigger pull is now 8 pounds. Kimber says that's within factory specs (approx 7 pounds?). I call B.S. and will be looking for a trigger job on it to bring it down to 4 - 5 pounds. don't get me wrong, I like Kimbers, but this just isn't what I've come to expect from them.
You were not hitting the target! I see a lot of dirt being pushed around on the berm though. Targets were unscathed. You do, however, get full credit for dispatching one berm!! 9:52
@@LibertySteele Good for you LS. I don't like it when it is obvious that misses are edited out. Rob Leatham would have trouble hitting small targets at 25+ yards with a 3-inch barrel too, so don't feel like the Lone Ranger! I enjoyed your video, so keep 'em coming.
Thank you for the video, Much appreciated! I checked one out at a gun shop today, definitely a sexy looking gun! Was trying to figure out support thumb placement without the slide cutting it? How do you place your support thumb while shooting? Thanks again
@@danmckeon6221 my support thumb rides on the slide. No cuts or issues. It does on almost every pistol I shoot. Next time I go, I will try to get some video from that side. There may be some shorts on my TikTok or Instagram that shows it.
Just picked one up and noticed the edges in the slide are razor sharp! I split my hand open racking the slide. Not cool lol. The weapon is beautiful however Can’t wait to shoot it, will more than likely wear gloves lol
@@seanflanagan578 thanks cant make my mind up between the kimber and a sig p365 but i heard the kimber fails alot ....for a carry pistol it better work if it needs to
@@MamasFunkyMonkey my bad dude, I thought you were asking about my canik, I get a bunch of questions from another comment. Definitely go with the 365, my kimber is on gunbroker now, when I shot it my thumb knuckle tripped the safety, I did not like it
Dude...look at the age of the video. Comparing the price of a hard to find new release and when it is readily available does not make sense. It was worth it....early to getting one, and first TH-cam video review of it.
Now...jeez. look at the date. New hard to find releases are typically high demand and go for more. Supply and demand. If you are willing to wait to get it cheaper,awesome. I wasn't...which is why I got the first review video to be published.
![ถามตรงๆ กับ อาจตุพร ทำไม ประเทศไทย ใครเป็นนายก ก็โดนด่า พอออกเเล้วคนคิดถึง!!?? l [Nickynachat]](http://i.ytimg.com/vi/3YFLMXxBGAs/mqdefault.jpg)
Please turn on closed captioning for correction: The weight is 15.6 ounces, not pounds...
Put a M☆ Carbo trigger kit in it and you'll have a awesome pistol. Trust me I installed one in my Micro 9 TFX Pro . Trigger pull reduction was over 50%. I can shoot it almost as well as my 4" Kimber Aegis Elite Pro 9mm . Keeping in mind I have polished all contact areas on that trigger group as well , but the M Carbo kit is new trigger Springs and metal finger tab plate that makes a huge difference . Best improvement I could do since the factory 7 lb trigger is way to heavy in my opinion
I fell in love with the looks of this gun so I bought it and also ordered a couple of extra mags from Kimber and like your video says it does take a different mag than the other Micro 9s. I love my Rapide Ice micro 9 and now I want the matching full size to go with it's little brother. But I love the look and feel of this gun and I have had zero issues with it. It was a little pricey but I would buy it again if I had too. Very sweet pistol. Liked your video but I didn't even research for videos of this gun because I own other Kimbers and had full confidence that this pistol would live up to Kimbers standards. 👍🏻
I got the rapide scorpius. And my wife just got this. Definitely, it's twin little brother.
Excellent review, I appreciate you putting this out! I got mine without knowing it was a special edition and bought an 8 round mag to boot, and was disappointed and confused when it didn’t fit. Happy to know why now!
Just take that dam extension off the mag well all others fit
I really appreciate your video. I haven’t found any other reviews on the Rapide. I just took mine to the range for the first time today and it cycled my range and defensive rounds without failure. Now that I’ve seen your review, I’m confident in my decision to start carrying daily.
I really love it. It is an actual pleasure to shoot, and comfortable to carry. By far my favorite pistol I own now. I have become a true Kimber fan, and am looking at other models to own.
Beautiful gun. I love the micro 9 from Kimber. Great review. Thanks also for giving the price point of this gun. 👍👍❤️
Just bought one today at the Gun Room in Winter Haven Florida
If this is received well, I will do reviews for my other firearms, and maybe others I get ahold of. Most of my vids have been around full-auto content...but I would love to get into this part of it as well.
I just bought this exact model
I picked up the hero edition with truglo day sights
I have one. It has a very heavy trigger for such a small gun. I installed a trigger kit from M carbo. It made a big difference.
Yeah, the 6lbs trigger is standard in a Micro 9. Honestly, I wouldn't want a new gun owner to have a light trigger...particularly on such a small gun. I am considering the same kit for mine...they advertise at least a 40% reduction...and many get as low as a 3lbs pull.
I did the same with my new Micro 9, such a huge difference in trigger pull.
mine measured out at 10 pounds over 5 different tests. Friendly LGS called Kimber, they said it was way too high, and send it back. Gave an RMA and pre-paid UPS label. Got it back today, it's still 8 pounds, and it's too damned heavy.
It's got an ambitious safety, which is a welcome addition for lefthanded people.
Bought mine at a local sportsman’s store for 829 yesterday they had one left
Not really a pocket pistol being 6.4 inches long, but a good side holster gun
Just seen the new micro raptor pro with crimson laser for 1100 nice looker but a bit steep but I payed 600 for my micro 9 s/s about 6 months back. There`s a vid on YT where a guy shows with just a little work you can put Sig mags in a micro 9.
Yes folks, they are becoming more available...which means more affordable...in some markets. No regrets.
I was able to purchase this gun back in December 2020 for $799
Payed 979 so ur lucky and I heard thats good compared to gunbroker
799 right now at a local place by me...
Plenty on gunbroker under $700 atm
@@Shattackable under 700. BS.
@@Stacker2112 lol I made this post 2 months ago and theres still plenty under $700. I will even sell you mine for $700. This gun is trash imo
Awesome video man! Just picked one up today! Have you got the laser grips yet? Would love to see a video on that!
I do have the Crimson Trace grips...I may do a video on them at a later date.
Picked mine up for $839.99. Trigger pull was terrible at 10 pounds. Sent it back to Kimber and they replaced the sear and trigger assembly, adjusted the extractor, refinished the barrel and chamber, polished the feed ramp, breech face and firing pin housing. Trigger pull is now 8 pounds. Kimber says that's within factory specs (approx 7 pounds?). I call B.S. and will be looking for a trigger job on it to bring it down to 4 - 5 pounds. don't get me wrong, I like Kimbers, but this just isn't what I've come to expect from them.
The pull on this gun is 7 lb that’s factory standard. It’s a hard pull but you get used to it.
The pull on this gun is 7 lb that’s factory standard. It’s a hard pull but you get used to it.
Put finger on the trigger with green laser light on, my right index finger blocks the laser
You were not hitting the target! I see a lot of dirt being pushed around on the berm though. Targets were unscathed. You do, however, get full credit for dispatching one berm!! 9:52
Yeah...I couldn't hit shit out at 25 plus yards with this sub-compact...lol. I put it in there for the sake of honesty.
@@LibertySteele Good for you LS. I don't like it when it is obvious that misses are edited out. Rob Leatham would have trouble hitting small targets at 25+ yards with a 3-inch barrel too, so don't feel like the Lone Ranger! I enjoyed your video, so keep 'em coming.
Thank you for the video, Much appreciated! I checked one out at a gun shop today, definitely a sexy looking gun! Was trying to figure out support thumb placement without the slide cutting it? How do you place your support thumb while shooting? Thanks again
Are you talking your trigger hand or support hand? I honestly handle like any other pistol without an issue.
@@LibertySteele support hand thumb, I'm right handed, so my left thumb, guess I could put a tab of grip tape on it.
@@danmckeon6221 my support thumb rides on the slide. No cuts or issues. It does on almost every pistol I shoot. Next time I go, I will try to get some video from that side. There may be some shorts on my TikTok or Instagram that shows it.
@@LibertySteele Thank you Sir! I'm buying one, need a small conceal & ankle carry gun.
A few days ago, my brother bought one for $750.
What are you shooting in yours, LS? Kimber seems to recommend the 147gr JHP Federals.
115 grain FMJ for target, Hornady 115 grain FTX Critical Defence for defense.
@@LibertySteele Thanks.
Just picked one up and noticed the edges in the slide are razor sharp! I split my hand open racking the slide. Not cool lol. The weapon is beautiful however Can’t wait to shoot it, will more than likely wear gloves lol
I would contact customer service. Kimber has top notch services.
How much for CT laser grip
This was 2 years ago....I have no idea what I spent. I'm not even sure if I got it off Amazon, Ebay, or their website. Sorry.
i got mine yesterday from cabelas for $850
How do you like it? Does it chamber ammo well?
@@MamasFunkyMonkey had no issue, been shooting all kinds of ammo, whatever I can find, it's great.
@@seanflanagan578 thanks cant make my mind up between the kimber and a sig p365 but i heard the kimber fails alot ....for a carry pistol it better work if it needs to
@@MamasFunkyMonkey my bad dude, I thought you were asking about my canik, I get a bunch of questions from another comment. Definitely go with the 365, my kimber is on gunbroker now, when I shot it my thumb knuckle tripped the safety, I did not like it
@@seanflanagan578 hell yea thankyou
They're on Gunbroker for $825
Dude...look at the age of the video. Comparing the price of a hard to find new release and when it is readily available does not make sense. It was worth it....early to getting one, and first TH-cam video review of it.
What model crimson trace laser did you get ?
LG-409g
Do you know if the mag release is reversible on these?
I do not believe so. I wish it was.
Does it have the decocker? It looks like it does.
i dont think this has a double action feature, i didnt notice a decocker on mine amd i tried manually decocking and firing and it didnt work
It's a thumb safety and single action trigger
Single action or striker trigger?
It is a single action. Is essentially just a mini 1911 in 9mm
$814 Basspro, 3 days ago
That is actually a bit high these days....but would have been great a year ago when I bought this when it first came out.
A tad perhaps, but when you factor in shipping, transfer fees, it comes in only about $15-25 more
Disappointing it is only 8 rounds, but it is a great looking gun.
Not sure what you expect out of a micro single-stack.these are intended for easy low bulk concealment...with the dependability of a 1911.
Seen one for 8 and a half.
Should have grabbed it! Selling for over 1k Gun Broker!
That's what I got mine for too
I found mine for 800 at bass pro.
Yes that’s what I paid for mine today
$800 everywhere online.
This was posted 6 months ago while it was brand new on the market. Jeez
who can believe that I bought this for 730 dollars (included tax 10%)
"Expecially?"
Picked one up for 900. Not to bad.
I got mine for $150.......
How did you manage that
$150 Down and $150 a month for 6 Months. Might be correct. :)
@@BERETTA9mmUSA he probably got the BB gun version 😂
What color is that on the lower portion of the gun? Looks like a bluish silver?
It is a different shade of silver...a bit more matt. It is only noticeable in certain light.
Micro 9 = Micro 8=D
🤣
The msrp is $800...
No it’s 1,059$
@@ethangifford1673 I guess it would have been a good investment then.
The trigger is pretty terrible for such a high price “custom” firearm
I got mine for 799
Where? I want to order. Thanks!
@@edwinchavous2937 dunham's but they don't have internet orders
Folks are so focused on the price I was willing to pay when it first came out...jeez! Get over it!
I just paid 940+ Tax and love it
That handgun isn't worth even remotely close to $11-$1200
Your opinion. Still happy with my purchase
Not worth more than 900.00
Now...jeez. look at the date. New hard to find releases are typically high demand and go for more. Supply and demand. If you are willing to wait to get it cheaper,awesome. I wasn't...which is why I got the first review video to be published.
zzzzzzzzzzzzzzzzzzzzzzz
I don't care what your politics are, but I would not buy a pistol with YONKERS, NEW YORK stamped into the frame billboard. Just saying 🤔
Well...if the name of a city on the firearm is more important to you than quality and reliability...have at it.