Dawn don’t worry about it, 50 miles, an hour is good enough for most people. I must have good empathy or something because I was actually a little bit scared for you myself if something happened with the wheel, there is always another day. People appreciate and love you too much to see anything happen to you. Anyways the way I look at it just make sure you have enough battery to go home and have a good breakfast lol; and like always you did a excellent job Keep up the good work, see you in the next one. 😎
Nice speed run but you got me on the edge of my seat worrying for you with all that beeping. You’ve also ridden the v13, will you please tell me the reasons why you prefer the commander pro over it? Thanks. Be safe!
52mph is up there with the v13 & likely everything else cept perhaps the MasterPro & likely the ex30. I have big hopes you'll do 55+mph gps on the ex30. Keep crushin' it!!!
Dawn, in your opinion with the new 4k EUCs should the bar be raised for quality control? The CP seems to be a killer riding wheel, but the quality seems horrendous. The V13 seems to be the only justified 4k wheel, if we are willing to pay the premium, right?
Yes. I do believe so. But I'm looking at this from a consumer perspective. I know dealers have to look at the cost of warranty repairs, import taxes, shipping, and a bunch of other costs...
Speed runs and technical issues - I have this problem all the time, the technical issues I get, is a severe lack of bottle. Breaking bones is not on my to do list. How many bones in the human body, not going for the record then? I should hope not :-) We like out EUC TH-cam personalities in one piece, thank you very much.
EEVEE'S refused to even sell this contraption. Check out their teardown. Ex30 is rushed together also. We need to STOP supporting Begode until they RESPECT our money n safety by giving us a QUALITY WHEEL. Fuck speed if you stand the chance of injury or your wheel is destroyed due to poor quality. Just my opinion.
I haven't had any issues with my 5 Begode wheels. This Commander Pro pre production wheel has issues, but I'll bet they will address at least the safety issues for production. I'm still holding out hope. Every wheel/company has had their issues. So pick your poison.
@Dawn Champion nah Dawn, if you call a cutout at 55mph "no issues"..........ok. You have 2 Masters and both are made with the same low quality materials by Begode. Cheap foam and plastics that bust apart on impact. We need to stop giving these low quality companies passes. Extreme Bull is WORSE than Begode although they're basically the same company using the same cheap ass parts.
Ok Ok I get the GW/BG hate. In that case, why you watchin this? Heck why arent you out on whatever deem worthy & ride? Why the need to preach to others on how they spend their money, enjoy their toys & most importantly, their lives. Is it cos yours is miserable so you cant take others not being similar? Go preach to your congregation cos this crowd likes speed & some of us even like BG wheels. My money my body my choice 😁.
I've been seeing a lot of reports of Sherman S issues. Issues that can't be fixed by user. Better to wait for them to address those before buying. Personally, I'd get a Commander Pro. But that's because of my riding style, resources available, etc
Dawn you forgot GROOT!!! 😃For your next speedrun i would just drive to the location so you don't use any of the batt. PS PLEASE DO A SPEEDRUN AND REVIEW OF THE SHERMAN-S????
It was cold soldered. Yes, re-solder. You might want to check out my in depth chat about all the issues I found. Commander Pro - My Thoughts - Live th-cam.com/users/livel8p2gtaDK_4?feature=share
The motor is not fed with continuous power from the battery. The supply is turned on and off very quickly, the variation of the time the motor is switched on to off is PWM (Pulse Width Modulation). If the PWM was to be 100% then the motor would be receiving all the power from the battery its able to (the point where you fall off). Alarms for PWM are usually set to around 80% leaving you some margin for safety.
You really became a good rider, Dawn! You’ve put out some really good and interesting videos recently so thank you, you are appreciated.
Thank you so much! ❤️❤️
Thank you. Love you dawn
Dawn don’t worry about it, 50 miles, an hour is good enough for most people. I must have good empathy or something because I was actually a little bit scared for you myself if something happened with the wheel, there is always another day. People appreciate and love you too much to see anything happen to you. Anyways the way I look at it just make sure you have enough battery to go home and have a good breakfast lol; and like always you did a excellent job Keep up the good work, see you in the next one. 😎
Thank you!! ❤️❤️
Like your helmet what brand I's that and also the third eye you have on helmet
Scorpion EXO AT 950
EVT Safe Zone Bicycle Helmet Mirror www.amazon.com/dp/B003LVHZ4O?ref=ppx_pop_mob_ap_share
Nice speed run but you got me on the edge of my seat worrying for you with all that beeping. You’ve also ridden the v13, will you please tell me the reasons why you prefer the commander pro over it? Thanks. Be safe!
52mph is up there with the v13 & likely everything else cept perhaps the MasterPro & likely the ex30. I have big hopes you'll do 55+mph gps on the ex30. Keep crushin' it!!!
I've gotten the Master to 55 gps
Dawn, in your opinion with the new 4k EUCs should the bar be raised for quality control? The CP seems to be a killer riding wheel, but the quality seems horrendous. The V13 seems to be the only justified 4k wheel, if we are willing to pay the premium, right?
Yes. I do believe so. But I'm looking at this from a consumer perspective. I know dealers have to look at the cost of warranty repairs, import taxes, shipping, and a bunch of other costs...
Speed runs and technical issues - I have this problem all the time, the technical issues I get, is a severe lack of bottle. Breaking bones is not on my to do list. How many bones in the human body, not going for the record then? I should hope not :-) We like out EUC TH-cam personalities in one piece, thank you very much.
Hi Dawn, do you know when the new upgraded batchs will be available for the commander pro? and will you be doing another review.
I heard March 15. Yes. I'll do another review 😁
EEVEE'S refused to even sell this contraption. Check out their teardown. Ex30 is rushed together also. We need to STOP supporting Begode until they RESPECT our money n safety by giving us a QUALITY WHEEL. Fuck speed if you stand the chance of injury or your wheel is destroyed due to poor quality. Just my opinion.
I haven't had any issues with my 5 Begode wheels.
This Commander Pro pre production wheel has issues, but I'll bet they will address at least the safety issues for production.
I'm still holding out hope. Every wheel/company has had their issues. So pick your poison.
@Dawn Champion nah Dawn, if you call a cutout at 55mph "no issues"..........ok. You have 2 Masters and both are made with the same low quality materials by Begode. Cheap foam and plastics that bust apart on impact. We need to stop giving these low quality companies passes. Extreme Bull is WORSE than Begode although they're basically the same company using the same cheap ass parts.
Ok Ok I get the GW/BG hate. In that case, why you watchin this? Heck why arent you out on whatever deem worthy & ride? Why the need to preach to others on how they spend their money, enjoy their toys & most importantly, their lives. Is it cos yours is miserable so you cant take others not being similar? Go preach to your congregation cos this crowd likes speed & some of us even like BG wheels. My money my body my choice 😁.
I don't know what to do.
Buy a Commander pro or a Sherman S ?
I've been seeing a lot of reports of Sherman S issues. Issues that can't be fixed by user. Better to wait for them to address those before buying.
Personally, I'd get a Commander Pro. But that's because of my riding style, resources available, etc
Dawn you forgot GROOT!!! 😃For your next speedrun i would just drive to the location so you don't use any of the batt. PS PLEASE DO A SPEEDRUN AND REVIEW OF THE SHERMAN-S????
😂. You're the first to notice!! 🤣
I didn't forget him. Was trying to be light for the speed runs, but that's probably why things didn't work out 🤣
I don't have a Sherman S to test!
Do you say the battery cable became disconnected?
Yes
I have the Commander Pro on order. Did you have to re-solder the battery leads or was it just a loose connector?
It was cold soldered. Yes, re-solder.
You might want to check out my in depth chat about all the issues I found.
Commander Pro - My Thoughts - Live
th-cam.com/users/livel8p2gtaDK_4?feature=share
I'm curious for if I get a begode wheel what does pwm mean?
This might help:.
th-cam.com/video/hxpzetproPg/w-d-xo.html
The motor is not fed with continuous power from the battery. The supply is turned on and off very quickly, the variation of the time the motor is switched on to off is PWM (Pulse Width Modulation). If the PWM was to be 100% then the motor would be receiving all the power from the battery its able to (the point where you fall off). Alarms for PWM are usually set to around 80% leaving you some margin for safety.
Take it easy on that garbage ass Death Trap Dawn.
ShermanS with new firmware is faster.
Good! I knew they could fix it with Firmware if they wanted to.