Hello Fellow colleagues. If you enjoy the video please click that like button and if you did not, dislike it and let us know in comments, what was, that made you not happy with the content, so I can learn from it and make better videos for you in the future. Have a great day everyone.
I enjoy the information, thank you for the swift way you're doing it... I have a question about password usage... Or how to get around it... Waiting for the machine getting to my workshop and I was told that the plc is "stuck' (???) and the "guy" that did first diagnosis said it's password protected... (???)
Good day, Sir. Thank you for the informative video. I just wanted to ask about an issue I'm having with a .FX file. My GX Developer can't open it. I hope you can help me with how to open it.
I have a PLC: Mitsubishi MELSEC FX-64MR-DS. I'd like to know wether a GXDeveloper V8.98C is compatible to program it or not. If not,which version of GXDeveloper do you reccomend me to program my PLC?
Nice video :). Is there an “easy” way to factory reset a Mitsubishi PLC? I got an second hand FX3G-14M but it has the original programming on it and I just want to delete it. This is my first PLC ever so no experience with it whatsoever. Computers and programming is a interest of mine so this seemed fun :)
Hi Flyrip. You will need to PC to remove the program, under online there is option Clear PLC memory. Or you can be cruel and remove battery and it will wipe the lot, not sure way you would want to do that as if you are going to use it again anyway, might as well get it done in GX Works 2.
@@IGSElectronics Thanks! I think I will start with removing the battery and see what happens 😊 I also have the “screen” so I just want to get playing with it 😄
Hi can u show me how to program fx1n. I have a colour senor to check if there is a print on a given length +-5mm if the senor detects print during the given period +-5mm need to stop servo motor if not sound the buzzer n stops
Good evening Ingus, I'm Jorge from Spain. Thanks for your great video. I will try to buy the original cable in Spain and test. I have some doubts, when uploading or downloading a copy from or to the plc, should I put it in stop ?, and then I have to download the 3 things, main, comments and parameters for a good backup? Regards.
JORGE H.G. Just select all 3 ticks. It don’t have any comments inside the plc, but for the sake of it, way not. You be fine, just fallow the steps in video you should have no problems.
Good morning Ingus again, I have not got the original mitsubishi cable in Spain, it is obsolete. My question is, would you have one to sell me, if you have enough, or if you know of any other model that could be reliable. Thanks for all!!
@@jorgeh.g. Hi Jorge. Yes I do have one original cable in stock. But i have not listed on website yet. Is your programming laptop have RS232 port or you are after usb version? Baying original from me would be around 120GBP, but have a look at the link below, they seam to claim it is suitable replacement for SC-09.www.radwell.co.uk/en-GB/Buy/RADWELL%20VERIFIED%20SUBSTITUTE/RADWELL%20VERIFIED%20SUBSTITUTE/SC-09-SUB
Hello Ingus, I have tried to do it with one similar to the one in the link, which a colleague has provided me, but I have not been able to connect, so I would like to do it with an original Mitsubishi, just as you have done. I have 2 computers, one with a serial port and one that does not, so with one I would try through the rs232 port, and the other would be through a usb / rs232 converter. The other one that you have yours to sell, is it original?
JORGE H.G. Yes, original cable form Mitsubishi. Original cables should say Beijer Electronics. Did he bay that form China? I am happy to supply you the cable, just wanted for you to have a go on cheaper version, radwell seams to claim that it is exact replica . I will list the cable on website tonight and let you know once it is up.
Hi sorry for my question I bought FX1n which works from 110-260v. How should i connect line and neutral - only in correct way (lane for line place) or tham can be mixed (line for neutral )?
Hi there. No don’t mix them up. Make sure L is for live N for neutral. Sometimes Big Bang can happen, but usually manufactures these days put some protection for that.
Hi There. The latest GX Developer, GX works 2 and 3 work with windows 10. You need to bay the software form distributor, were you are. If you already have the software then head to Mitsubishi website and search for latest updates for the software you have already. Hope that answers your question.
buenas espero puedan ayudarme tengo un plc fx2n tiene falla en el programa y al bajarlo esta incompleto y dice que tiene 8000 step ,podria ser un problema de parametros ??
"...these PLC's last forever..." Here because mine died...thanks for the video!
Hello Fellow colleagues. If you enjoy the video please click that like button and if you did not, dislike it and let us know in comments, what was, that made you not happy with the content, so I can learn from it and make better videos for you in the future. Have a great day everyone.
thank you sir for your video I bought PLC FX1 -48MT please let me know where to get program installer?
I enjoy the information, thank you for the swift way you're doing it...
I have a question about password usage... Or how to get around it... Waiting for the machine getting to my workshop and I was told that the plc is "stuck' (???) and the "guy" that did first diagnosis said it's password protected... (???)
Hi sir..what model mitsubishi HMI that compatible with this PLC series. Currently i used FX-48MT.
Good day, Sir. Thank you for the informative video. I just wanted to ask about an issue I'm having with a .FX file. My GX Developer can't open it. I hope you can help me with how to open it.
what are the communication protocols in this PLC "FX2N-80MR"? can use for reading the data out from it ?
I have a PLC: Mitsubishi MELSEC FX-64MR-DS.
I'd like to know wether a GXDeveloper V8.98C is compatible to program it or not.
If not,which version of GXDeveloper do you reccomend me to program my PLC?
Good job
Hello, I'm asking you. What version of Gx Developer are you using? I have an FX-48MR PLC and I still have not been able to connect, Thank you
For that, you will need to look into the com port setup and make sure the correct port is used, as well as the legit sc-09 Mitsubishi cable.
Hello er have a melsec FX-32 does it work with that ?
Sir, i want to backup program fx 128 mt, but can't, i use gw works 2, maybe i must use gx developer? Can i backup when fx 128 mt, Run mode ?
Nice video :). Is there an “easy” way to factory reset a Mitsubishi PLC? I got an second hand FX3G-14M but it has the original programming on it and I just want to delete it. This is my first PLC ever so no experience with it whatsoever. Computers and programming is a interest of mine so this seemed fun :)
Hi Flyrip. You will need to PC to remove the program, under online there is option Clear PLC memory. Or you can be cruel and remove battery and it will wipe the lot, not sure way you would want to do that as if you are going to use it again anyway, might as well get it done in GX Works 2.
@@IGSElectronics Thanks! I think I will start with removing the battery and see what happens 😊 I also have the “screen” so I just want to get playing with it 😄
Hi can u show me how to program fx1n. I have a colour senor to check if there is a print on a given length +-5mm if the senor detects print during the given period +-5mm need to stop servo motor if not sound the buzzer n stops
Will put that on my to do list.
Good evening Ingus, I'm Jorge from Spain. Thanks for your great video. I will try to buy the original cable in Spain and test. I have some doubts, when uploading or downloading a copy from or to the plc, should I put it in stop ?, and then I have to download the 3 things, main, comments and parameters for a good backup? Regards.
JORGE H.G. Just select all 3 ticks. It don’t have any comments inside the plc, but for the sake of it, way not. You be fine, just fallow the steps in video you should have no problems.
Good morning Ingus again, I have not got the original mitsubishi cable in Spain, it is obsolete. My question is, would you have one to sell me, if you have enough, or if you know of any other model that could be reliable. Thanks for all!!
@@jorgeh.g. Hi Jorge. Yes I do have one original cable in stock. But i have not listed on website yet. Is your programming laptop have RS232 port or you are after usb version? Baying original from me would be around 120GBP, but have a look at the link below, they seam to claim it is suitable replacement for SC-09.www.radwell.co.uk/en-GB/Buy/RADWELL%20VERIFIED%20SUBSTITUTE/RADWELL%20VERIFIED%20SUBSTITUTE/SC-09-SUB
Hello Ingus, I have tried to do it with one similar to the one in the link, which a colleague has provided me, but I have not been able to connect, so I would like to do it with an original Mitsubishi, just as you have done. I have 2 computers, one with a serial port and one that does not, so with one I would try through the rs232 port, and the other would be through a usb / rs232 converter. The other one that you have yours to sell, is it original?
JORGE H.G. Yes, original cable form Mitsubishi. Original cables should say Beijer Electronics. Did he bay that form China? I am happy to supply you the cable, just wanted for you to have a go on cheaper version, radwell seams to claim that it is exact replica . I will list the cable on website tonight and let you know once it is up.
Hi sorry for my question I bought FX1n which works from 110-260v. How should i connect line and neutral - only in correct way (lane for line place) or tham can be mixed (line for neutral )?
Hi there. No don’t mix them up. Make sure L is for live N for neutral. Sometimes Big Bang can happen, but usually manufactures these days put some protection for that.
@@IGSElectronics great thank you, i will be careful with contacts
i need more knowlege on this master
How much is the software?
hello, a query, how do I get the program for Windows 10?
Hi There. The latest GX Developer, GX works 2 and 3 work with windows 10. You need to bay the software form distributor, were you are. If you already have the software then head to Mitsubishi website and search for latest updates for the software you have already. Hope that answers your question.
hello sir ,, I need toshiba ex100 plc software, do you have it, and how to program it.
Hi Soni. Never worked with toshiba products, sorry cant help you here.
How about Melsec A1S PLC sir?
Hi there. I will look in to it.
How to remove fault
buenas espero puedan ayudarme tengo un plc fx2n tiene falla en el programa y al bajarlo esta incompleto y dice que tiene 8000 step ,podria ser un problema de parametros ??
Buenos días me podrían colaborar requiero cargar un programa de una memoria eeprom a un plc
Hi sir
Hello
Hi