Well, the man on the ledge without fall protection, they put the skinniest man in the basket, jabbing the same spot and didn’t get anything done, plus they stand around asking what we do? Amazing, no wonder it doesn’t get cleaned.👎🏻👎🏻
I am impressed at the single cable holding the cage thar is designed to have four attachments bad day if the single failes if four are used its a minor inconvenience if one fails.
Столько "умников" в комментах, ни разу не долбивших спрессованный штыб!))) Он только кажется с телефона таким мягким, типа только тронь и посыпится. А на самом деле это корка спрессованной пыли и грязи с камнями, в которой вязнет и лом и отбойный молоток. Вроде как засохгий пластилин или замазка
Why not start at the bottom and try to start an avalanche.The amount of lost production due to lack of experience is staggering a hydraulic excavator works wonders 😀
On one hand it's nice that they're open to suggestions. On the other hand, it's kinda alarming that a mining company takes its way of working from TH-cam comments 😂
One would think to remove the cage and just let the weight of the hook start at the top and push the gavel down as it slides down . Would have to be quicker or even the thing they use to move a stock Rock ?
I get it. You can't be squeaky clean there but they didn't even care to empty their cage. One will slip on a stone one day.. it's depressing. Also, take an excavator, a shovel without teeth to not damage the tiles. Sigh.
Mich faszieniert die Geschwindigkeit, mit der die Arbeit, Deutsche Geschwindigkeit ist 3,7-fach mehr, das könnten bei uns keine Facharbeiter sein, nicht einmal ungelernte bewegen sich so langsam.
The rigging on the basket is horrendous! If that rope Gail's, it's gone. A proper strap from each corner to the hook. That's why the basket has 4 eyes.
They should use 2 individual chains from the crane hook to the cage. So if 1 fails then the cage will still hang from the crane via the other chain. With that hobbybob steel wire they use, if it fails, the entire cage will fall. Better would be actually 4 chains, one to each corner of the cage. Also something about using certified and inspected hoisting equipment but i guess “never mind” will be easier in this case regarding that 😂. But know that you’re toying with human lives. You’ll feel very bad at the funeral of these guys if they fell because of being a cheapskate on safety equipment.
Well, that didn’t work, did it?
Like trying to use a garden hose on a house fire
Well, the man on the ledge without fall protection, they put the skinniest man in the basket, jabbing the same spot and didn’t get anything done, plus they stand around asking what we do? Amazing, no wonder it doesn’t get cleaned.👎🏻👎🏻
I am impressed at the single cable holding the cage thar is designed to have four attachments bad day if the single failes if four are used its a minor inconvenience if one fails.
I put the speed to 2x. To have the impression something is happening...
Frustrating
I expect to see them still at this next year!
And the year after that
Having worked around all kinds of cranes, how did the window get broken ?
Столько "умников" в комментах, ни разу не долбивших спрессованный штыб!))) Он только кажется с телефона таким мягким, типа только тронь и посыпится. А на самом деле это корка спрессованной пыли и грязи с камнями, в которой вязнет и лом и отбойный молоток. Вроде как засохгий пластилин или замазка
Why not a long stick trackhoe once a week instead of once a year by hand
Why not start at the bottom and try to start an avalanche.The amount of lost production due to lack of experience is staggering a hydraulic excavator works wonders 😀
It will be try
Just thinking the same, use a long reach excavator, it can reach all the way to the bottom...😀
@@karstenhansen8829 correct, a Longreach with a decent ripper would have that job done in 1/4 of the time
On one hand it's nice that they're open to suggestions. On the other hand, it's kinda alarming that a mining company takes its way of working from TH-cam comments 😂
YES YES YES
A long boom excavator would work great.
If they knew how to operate it.👍😁
It will be try
I want to see the start up and shut down of this crusher sometime and the control center.
They brought more out on their boots .
I’d like to know what was achieved in that video
One would think to remove the cage and just let the weight of the hook start at the top and push the gavel down as it slides down . Would have to be quicker or even the thing they use to move a stock Rock ?
10 minute jackhammer job… probably changed to days of work. But you are still maintaining that “good crane” so…
This entire operation seems to be based on doing things slowly and inefficiently.
Their way of doing takes back to the builders of the pyramids.
It's like cutting the grass on a football field with a pair of nail scissors
There has to be a more efficient way to clean this thing!
Please play more videos. I love watching them!
I will try
Cleaning what Cleaning it looks the same as when they started
No excavator handy?
I get it. You can't be squeaky clean there but they didn't even care to empty their cage. One will slip on a stone one day.. it's depressing. Also, take an excavator, a shovel without teeth to not damage the tiles. Sigh.
Why don't you use an electric jack hammer to free up that dirt?
Go from the bottom. Take a bit out it'll all go down at once.
Legend say they are still cleaning🤣
what an absurd and useless method
I have seen my grand children move more on the beach with there buckets and spades
Why not use a gas powered earth auger
Who did they piss off to get chosen for that job?
The bosses daughter
Mich faszieniert die Geschwindigkeit, mit der die Arbeit, Deutsche Geschwindigkeit ist 3,7-fach mehr, das könnten bei uns keine Facharbeiter sein, nicht einmal ungelernte bewegen sich so langsam.
The rigging on the basket is horrendous! If that rope Gail's, it's gone. A proper strap from each corner to the hook. That's why the basket has 4 eyes.
Nightmare
Способ зацепа люльки категорически запрещен!!!
Air chisels for everyone .
👌👌
They need a longer reach excavator to do it rite
How thick are those Armor plates?
Thick and tough. Forged steel.
That's a bit much to clean by hand you need a long reach backhoe
Maybe they should have dragged that mostly useless giant hook around a bit too
With you Chris
They should use 2 individual chains from the crane hook to the cage. So if 1 fails then the cage will still hang from the crane via the other chain. With that hobbybob steel wire they use, if it fails, the entire cage will fall. Better would be actually 4 chains, one to each corner of the cage.
Also something about using certified and inspected hoisting equipment but i guess “never mind” will be easier in this case regarding that 😂. But know that you’re toying with human lives. You’ll feel very bad at the funeral of these guys if they fell because of being a cheapskate on safety equipment.
I would think starting at the bottom and working your way up would be wiser
Most video
These 2 guys are as slow when as the trackhoe they use. That guy acts as if he's afraid of it.
I'm thinking the rigging on the cage isn't OSHA approved......
They need to speed up the crane,how does this Company make any money
Didn’t seem to have shifted much if anything
Minimal work effort in display.
Not a respirator in sight.
what was the dopey bloke doing on the top of the hopper scraping it into the yard not the hopper
Unbelievable…so much for health and safety.
lol no sweat yet or ever ...................
Shameful, cheap and unsafe mine operators.
Someone doesn't know how to hold a camera.
das war ja ein kurzer arbeitstag!
Might as well of given them tooth pics.
Too painful to watch.
stupid way of working, start below and gravety does it work and probably every above it colapse at once.
That was fairly half hearted , piss poor set up too . Not impressed
fate ridere!!!!
Looks like they are not even trying