I did a couple videos on this light too. It’s a great light with a couple downsides, but is definitely a viable option depending on what people find most important.
I just wanted to say thank so much for all the advice and knowledge you share on your channel. Because of you and others I was able to improve the look of my channel and launch a media company of my own on the side last year. Your inspiring keep doing what you do.. It makes a difference.
You should have a look at the Wellmaking HL-800: 80W + bowens mount + fresnel + Battery on the light and Vmount adapter for $200. just replace the swivel with fotodiox ultra heavyduty flash bracket ($15) for example to have a pretty good very light and compact overall solution
Ordered one of these a couple of days ago and it arrived shortly before you posted this video. Haven't had a chance to put it through its paces just yet.
they fixed the the tilt lock and the fan noise on v2 of this light. It now has a locking style tilt, i am able to put my bog softbox on it with no issues now.
I use these lights daily. Took two of them away overseas for a week long shoot And perfect so small can run these off v lock batts so that is definitely something worth mentioning I use light dome minis and yungneo? Fennell if want to spot it For the price I think these are awesome
I believe the Sokani X60 v2 has sorted out both the yoke and the fan noise. Would you say 2m is the max distance you'd have this light from the subject before fall off?
So I actually picked up the GVM 80W prior to seeing this video. $120 for the light, umbrella, stand, and reflector. The output is great imho but it lacks control. There's just a dimmer switch on the back. Construction is plastic but doesn't seem too bad. Fan noise isn't bad. Definitely a usable budget option.
Did you notice the AC adapter having a low freq rumble? The one I purchased has thing, not sure if it is normal. Also I replaced the handbrake with a M6 tightening handle...I'll try using a washer too!
So a problem I have found that Gerald didn't seem to have or didn't mention. The Bowens mount is WAY to lose. I can pull off the included reflector without depressing the button and my Light Dome 2 can also be pulled off without depressing the release. To fix this I have used 4 or 5 small strips of gaff tape to wrap around the Bowens mount where each of the 3 prongs rest when attached. This has fixed the issue and still allows plenty of wiggle room. I have torn down the whole light and I'm looking at adding a potentiometer to the fan to slow the speed as it is very loud. This unit Does have a temp sensor on it. I suppose in case it overheats, it just shuts the light off. Interestingly the fan has a fan speed control wire however it is cut from the factory! Also looking at a Wedge Locking Washer instead of just a regular washer to sure up the yoke and hopefully support my Light Dome 2. The metal yoke seems to be strong enough to handle the weight. Overall I'm enjoying the light!
Looks like a pretty cute light G! I need to pick something stronger up as I have the SL60. The Godox VL300 looks pretty cool, though I’m totally in love with the 300d II, just need to sell my soul for that 🙈
3 months ago i bought the nanlite forza 60. I think she may interest you. She’s little and powerfull and she can be fed by 2 npf battery There is not lot of test on TH-cam about this light. Many people should know this brand
Thanks for this, I recently got the SL60 and am overall very happy with it, the new model seems better on the noise and at 3ft im not hearing it at all. will look at these as a second light for the workshop studio. my only real complaint is the handle on the SL60 feels flimsy and with the box in its a lot of weight.
I really want this light! i already own the GVM and its Great but it has No effects unlike the sokani, i'm disappointed in the color though, i guess i'll just gel it and use it as accent lighting. BTW thanks for the first actual useful review of this light on youtube, Way to Go!
Bought 2 of the Godox a few years ago to change it up from the Aputure LED panels and get some of those Bowen S light modifiers to put to use. They're alright, but Aputure really hits the price VS reward sweetspot of course. But y'all know a camerageek... all the funds towards cameras and lenses first... with lighting and audio at first being somewhat of an afterthought. We'll address that... at like, some point. xD
Yeah, I agree. Aputure is the sweet spot for sure. Especially with their 2nd gen stuff. They have very few shortcomings, but still offer a pretty great value. Because, yeah, I also agree that lighting is often a better investment than more cameras.
It'd be cool if you do a modding tutorial to fix the quirks: replace the shitty cable, replace the fan, add v-Mount, and switch or mod the yolk, that'd make this thing a killer since the godox is great but the size is a tad big for what it is, especially with the gigantic cap for the chip
I just discovered an rgb version of this fixture on Amazon, but haven’t seen any reviews, curious if you’d be able to get a review copy. Seems to have been released last spring so wondering if it has the v2 refinements, but also really curious how bi colour plus rgb would perform in a cob fixture as I haven’t seen this from any major manufacturer yet.
Some differences with the Forza 60 is that the Forza can run fan-less under 50% the fan is also small and a bit noisy when running. In certain set-ups its been something I've had to address in post to clean up. The battery grip is sold separately, I haven't ordered or tried it yet as the reviews are not fantastic on the battery-grip, but it would be convenient. The colour seems accurate to my eye, extremely happy with that. Some other differences are the lack of an umbrella holder, which I purchased an umbrella holder to solve that problem. I would probably recommend the Forza to someone looking to create a very compact and portable lighting kit. The Forza is smaller than you might think, especially with its mini-bowens mount. I use it mostly with a folding umbrella so its an extremely compact package. Thats where I think the Forza would make sense, for someone who wants a compact and accurate light. Otherwise the lights mentioned in this video might make more sense because of the cheaper price point.
Mitch Doll yeah I've used the forza a few times, but would like more scientific comparison of output, color, and fan noise. Being able to turn off the fan is a useful feature but most of the times I'd want the full output
Great job on this one. I like your reviews. Really clear but with a deep testing. Do you see the new one they came out Sokani X180 180W. It's more powerful and I think it can be powered by xlr to dtap. Nobody talk about it. It's a job our best reviewer... 🔥🔥🔥
So the SL-60W (for me in Europe Neewer not Godox, still same) has a better build, I can put a big soft box on it (for cheap), cheaper, bicolor, and the remote is good enough (can be turned off). I don't get why I should choose the Sokani over it. Big fan of the SL-60W, we don't have issues with the noise with using the Samson CO2s (based on your recommendations, thanks). I need some smaller lights in the set which have bowens mount, but this one haven't convinced me.
version 2 has a much improved mount and now supports heavier modifiers. I’m happy with it. You can even power it from a v mount with a v mount to dc cable making it a great little outdoor light. I’ll see if it stands the test of time I’ve only had it a few days so need to try it on a few shoots.
you should review Jinbei EF II 60 light. it competes directly with godox sl-60 but it can be powered with standard 2 sony battery. few review even says that it more color acurate than sl-60.
Hello Sir, I’m about to buy outdoors light but I can’t even decide which one I should buy. I don’t have a huge budget and as you experienced those things, which should I buy? Based on durability, quiet and good quality. 🙏🏾
Wow not bad. As for the wire coming out of the brick, being that is DC low voltage in not surprised that engineers want to keep the length short. I would think that's an off the shelf power brick as well. I wouldn't want to run 15volt DC more than a few feet. Thank you. I may grab this light. Although every non aputure light I have has a less likeable color imo to my aputures
Could you please do a comparison between the Sokani x60 and the Nanlite Forza 60 as they look extremely similar to the point where they may even be the same on the inside? The Nanlite is slightly more expensive.
Hey Gerald. Nice video because I‘m searching for a cheaper light with a bowens adapter. But could you please make a video about cheaper alternatives to the aputure lights? Would be great. Cheers from austria
Thanks for your reviews! I like the weight and how compact the Flexible LED lights are but it seems like the Falcon Eyes SO-28TD would be quicker to setup and would travel find because of it's build quality. Which would travel with? I have the Aputure LS 300D
Gerald your sokani review for the x21 mislead me lol. The power button malfunctions immediately and the replacements had the same issue. Please use the gear for a bit. Sokani needs better quality control before I trust them again. BTW they took away the listing for the x21...hmmmm. Great video btw keep up the great output.
Have you ever tested a godox flaxible panel? At the moment i'm using 60x60 FL150 LED panel. At the first time it's good, but has some kind weird temperature and brightness control.
Hey Gerald! I have an off topic question. Does anyone make a good camera with decent video capabilities that would, for example, stay trained on me while I mow the lawn? I have a big lawn, so it would need to be able to zoom & rotate itself. Now that I think of it.... it would need to have the ability to be controlled from my smart phone so I can ensure it's doing it's job, has enough battery left, can switch from video to still, etc. Or do I still need a guy for that?
Enjoyable! Could someone recommend a good light for Rim and Background lighting for Photography? One that can be powered by battery. My major dilemma is panel vs COB LED.
You mentioned that the output wasn't even close to the aputure 120d Mark II, but what about the original 120d? Alot of folks still have that and the output from that is enough for a lot of folks needs. Plus I think you mentioned its brighter than the good and from what I remember the godox is ssssuuupppeeeerrrr close in output to the original 120d.
Hi, Alex. It's about 2/3rds of the 120d II. I get similar results at 100% to what i get at 60-65% on the 120d II. If that helps. And about 30% on the 300d II.
These lights are getting better and better but keep running into these kinds of issues. The Godox is good for the price but the airflow design is horrible for thermals and suffers a similar weak yolk and louder fan than one would want. Would love to see a video trying to DIY tackle the sokani's issues such as replacing the fan & thermal compound with higher quality ones, beefing up the yolk much like your washer trick and figuring out if a v-mount battery rig would work and for how long it would power the light. Then compare the total price and time it took to fix the sokani vs the price of a 120d mkii.
Shoelace tie to pole or vmount/counterweight to balance if you have big modifier like dome to prevent sag, ghetto it up. Totally theoretical and I'm chatting out me arse. Also getting my first light, gonna go for f7, got a UK affiliate link?
Salesman at remote control factory : "Hey boss I finally sold all those 30 year old remote controls we've had in back all this time. I'm taking the rest of the week off."
The A/C plug is Chinese. Physically compatible with ungrounded North American outlets, but lacking holes in the prongs, and unpolarized (same size prongs).
You had me at “dirty dangler” 😂
Hey, that's my porn star name... hands off.
so to speak.
Digging the 3-camera shoot in this video. Great look.
Thanks, dude! 🤓🙏
Intro for next video: "I'm Gerald Undone, and no one likes a dirty dangler."
NETRO so happy that this is the top comment. I was gonna say the same thing!
Damn you beat me to it! 🤣
I did a couple videos on this light too. It’s a great light with a couple downsides, but is definitely a viable option depending on what people find most important.
I love the Godox SL60! I'm glad cheap lights keep coming out.
Edit - Also... this was indeed cray zay.
Congrats on reaching 100K!👊
Definitely the wittiest video of yours I've seen. I appreciate that.
“Hi I’m Gerald Undone and Uncle Leroy stole my heart and didn’t give it back.”
I just wanted to say thank so much for all the advice and knowledge you share on your channel. Because of you and others I was able to improve the look of my channel and launch a media company of my own on the side last year. Your inspiring keep doing what you do.. It makes a difference.
You should have a look at the Wellmaking HL-800: 80W + bowens mount + fresnel + Battery on the light and Vmount adapter for $200. just replace the swivel with fotodiox ultra heavyduty flash bracket ($15) for example to have a pretty good very light and compact overall solution
8:53 = the most chill DJ ever
"Hi, I'm Gerald Undone and enodnU dlareG m'I, iH"
“Hi I’m Gerald Undone and this is what it sounds like, when the doves cry.”
Inspired by your line in video about the light fan 😅
Ordered one of these a couple of days ago and it arrived shortly before you posted this video. Haven't had a chance to put it through its paces just yet.
Hi Gerald. Like the review. How about the Wellmaking 80W? Markus Pix reviewed that a few weeks ago. I wanted to know how it compares to this.
You're a dirty dangler...
Great video man!
I've got a label maker, and "dirty dangler" is about to go on every one of those boxes.
Amazing Studio setup update... much needed
!
Swiping everything off the table is my favorite part of this video. Well, that and the chipper audio
they fixed the the tilt lock and the fan noise on v2 of this light. It now has a locking style tilt, i am able to put my bog softbox on it with no issues now.
I use these lights daily.
Took two of them away overseas for a week long shoot
And perfect so small can run these off v lock batts so that is definitely something worth mentioning
I use light dome minis and yungneo? Fennell if want to spot it
For the price I think these are awesome
I think I have never watched a better review in my life. Wow.
'I'm Gerald Undone and LEROYYYYYYY JENKKKINSSS' *Leaves frame*
You can get a GVM with light box & stand for $144. On amazon. Pretty good deal.
Can you do a review of the GVM when you get one??
I believe the Sokani X60 v2 has sorted out both the yoke and the fan noise. Would you say 2m is the max distance you'd have this light from the subject before fall off?
Man I never thought I'd buy another light... but I gotta have this light!!!
So I actually picked up the GVM 80W prior to seeing this video. $120 for the light, umbrella, stand, and reflector. The output is great imho but it lacks control. There's just a dimmer switch on the back. Construction is plastic but doesn't seem too bad. Fan noise isn't bad. Definitely a usable budget option.
always fun to watch, btw what was that at 1:14?
Came to ask the same thing.
Did you notice the AC adapter having a low freq rumble? The one I purchased has thing, not sure if it is normal. Also I replaced the handbrake with a M6 tightening handle...I'll try using a washer too!
Not that I could hear. But I didn't stick my ear up to it. And good idea on the handle! 👍
Love the info. Now I have another option for a inexpensive light that is pretty good. Thx Gerald
A comparison between this and the Aputure COB 60d would be very interesting
Awesome as always! Also, you should check out the Nanlite Forza 60!
So a problem I have found that Gerald didn't seem to have or didn't mention. The Bowens mount is WAY to lose. I can pull off the included reflector without depressing the button and my Light Dome 2 can also be pulled off without depressing the release. To fix this I have used 4 or 5 small strips of gaff tape to wrap around the Bowens mount where each of the 3 prongs rest when attached. This has fixed the issue and still allows plenty of wiggle room. I have torn down the whole light and I'm looking at adding a potentiometer to the fan to slow the speed as it is very loud. This unit Does have a temp sensor on it. I suppose in case it overheats, it just shuts the light off. Interestingly the fan has a fan speed control wire however it is cut from the factory! Also looking at a Wedge Locking Washer instead of just a regular washer to sure up the yoke and hopefully support my Light Dome 2. The metal yoke seems to be strong enough to handle the weight. Overall I'm enjoying the light!
Looks like a pretty cute light G! I need to pick something stronger up as I have the SL60. The Godox VL300 looks pretty cool, though I’m totally in love with the 300d II, just need to sell my soul for that 🙈
What umbrella did you use with the Sokani?
3 months ago i bought the nanlite forza 60. I think she may interest you. She’s little and powerfull and she can be fed by 2 npf battery
There is not lot of test on TH-cam about this light. Many people should know this brand
u should make a video about that light since no one else will
Hi Gerald! V2 of it seemed to have solved the noise and some other issues. Any thoughts about it?
Thanks for this, I recently got the SL60 and am overall very happy with it, the new model seems better on the noise and at 3ft im not hearing it at all. will look at these as a second light for the workshop studio. my only real complaint is the handle on the SL60 feels flimsy and with the box in its a lot of weight.
I really want this light! i already own the GVM and its Great but it has No effects unlike the sokani, i'm disappointed in the color though, i guess i'll just gel it and use it as accent lighting. BTW thanks for the first actual useful review of this light on youtube, Way to Go!
Dun, Dun....Gerald undone.....Dun, Dun, Dun he's craaaaazyy!!
Have you checked out the dracast boltrays. They are pretty solid.
Bought 2 of the Godox a few years ago to change it up from the Aputure LED panels and get some of those Bowen S light modifiers to put to use.
They're alright, but Aputure really hits the price VS reward sweetspot of course.
But y'all know a camerageek... all the funds towards cameras and lenses first... with lighting and audio at first being somewhat of an afterthought.
We'll address that... at like, some point. xD
Yeah, I agree. Aputure is the sweet spot for sure. Especially with their 2nd gen stuff. They have very few shortcomings, but still offer a pretty great value. Because, yeah, I also agree that lighting is often a better investment than more cameras.
It'd be cool if you do a modding tutorial to fix the quirks: replace the shitty cable, replace the fan, add v-Mount, and switch or mod the yolk, that'd make this thing a killer since the godox is great but the size is a tad big for what it is, especially with the gigantic cap for the chip
I just discovered an rgb version of this fixture on Amazon, but haven’t seen any reviews, curious if you’d be able to get a review copy. Seems to have been released last spring so wondering if it has the v2 refinements, but also really curious how bi colour plus rgb would perform in a cob fixture as I haven’t seen this from any major manufacturer yet.
How does it compare with the Nanlite Forza 60? This forza one seems to pack a punch and it does accept batteries..
Gabriel Maia yes I would also like to know how they compare
Some differences with the Forza 60 is that the Forza can run fan-less under 50% the fan is also small and a bit noisy when running. In certain set-ups its been something I've had to address in post to clean up. The battery grip is sold separately, I haven't ordered or tried it yet as the reviews are not fantastic on the battery-grip, but it would be convenient. The colour seems accurate to my eye, extremely happy with that. Some other differences are the lack of an umbrella holder, which I purchased an umbrella holder to solve that problem. I would probably recommend the Forza to someone looking to create a very compact and portable lighting kit. The Forza is smaller than you might think, especially with its mini-bowens mount. I use it mostly with a folding umbrella so its an extremely compact package. Thats where I think the Forza would make sense, for someone who wants a compact and accurate light. Otherwise the lights mentioned in this video might make more sense because of the cheaper price point.
Mitch Doll yeah I've used the forza a few times, but would like more scientific comparison of output, color, and fan noise. Being able to turn off the fan is a useful feature but most of the times I'd want the full output
@@LittleFjords Yeah, I'd appreciate too!
Great job on this one. I like your reviews. Really clear but with a deep testing. Do you see the new one they came out Sokani X180 180W. It's more powerful and I think it can be powered by xlr to dtap. Nobody talk about it. It's a job our best reviewer... 🔥🔥🔥
So the SL-60W (for me in Europe Neewer not Godox, still same) has a better build, I can put a big soft box on it (for cheap), cheaper, bicolor, and the remote is good enough (can be turned off). I don't get why I should choose the Sokani over it. Big fan of the SL-60W, we don't have issues with the noise with using the Samson CO2s (based on your recommendations, thanks). I need some smaller lights in the set which have bowens mount, but this one haven't convinced me.
version 2 has a much improved mount and now supports heavier modifiers. I’m happy with it. You can even power it from a v mount with a v mount to dc cable making it a great little outdoor light. I’ll see if it stands the test of time I’ve only had it a few days so need to try it on a few shoots.
Nicely done man
you should review Jinbei EF II 60 light. it competes directly with godox sl-60 but it can be powered with standard 2 sony battery. few review even says that it more color acurate than sl-60.
Hello Sir, I’m about to buy outdoors light but I can’t even decide which one I should buy. I don’t have a huge budget and as you experienced those things, which should I buy? Based on durability, quiet and good quality. 🙏🏾
Wow not bad.
As for the wire coming out of the brick, being that is DC low voltage in not surprised that engineers want to keep the length short. I would think that's an off the shelf power brick as well. I wouldn't want to run 15volt DC more than a few feet.
Thank you. I may grab this light.
Although every non aputure light I have has a less likeable color imo to my aputures
Couldn't you replace the tightening nut with a hand brake, if you found one with the same thread size?
What do you thing about the Wellmaking 80W?
yeah I would like to know that too but sadly no one will tell us
Intro for next video: "I'm Gerald Undone, and Uncle Leroy didn't fix the Christmas lights"
could you review the the version 2 of this light
Would so buy this light but that yoke is a total killer :/ hopefully in the future!
Excellent video. Will check this out!
impressive.. But is this SOKANI X60 is brighter than godox SL100w?
Great video, wonderfully informative!
Regarding the tilt - do you think a rubber washer could be more effective at stopping the droop?
Could you please do a comparison between the Sokani x60 and the Nanlite Forza 60 as they look extremely similar to the point where they may even be the same on the inside? The Nanlite is slightly more expensive.
Awesome review! Quick question what light would you recommend for portability with low fan noise? Preferably one that’s budget conscious
Cute little light! Thanks for looking at an affordable option 👍
Ps at 6.23 were you channeling Mr Bloom's pussycats? 😁
Great review. I’m really hoping one of these companies introduce a bi color led for times when you want tungsten instead of buying two separate units.
Hey Gerald. Nice video because I‘m searching for a cheaper light with a bowens adapter. But could you please make a video about cheaper alternatives to the aputure lights? Would be great. Cheers from austria
Thanks for your reviews! I like the weight and how compact the Flexible LED lights are but it seems like the Falcon Eyes SO-28TD would be quicker to setup and would travel find because of it's build quality. Which would travel with? I have the Aputure LS 300D
what do you think about the CAME-TV Boltzen 55w vs the sokani or the others?
Uncle leeroy 🤣🤣🤣 I would like to see you modify the fan to see if you could make it quiet and not get picked up by the mic. Nice video!
Could you review the Nanlite Forza 60 / 300 / 500? They seem to be a worthwhile competitor to Aperture.
Gerald your sokani review for the x21 mislead me lol. The power button malfunctions immediately and the replacements had the same issue. Please use the gear for a bit. Sokani needs better quality control before I trust them again. BTW they took away the listing for the x21...hmmmm. Great video btw keep up the great output.
CRzy Que - Are there any, any solutions for a mobile battery / v-mount etc?
Have you ever tested a godox flaxible panel? At the moment i'm using 60x60 FL150 LED panel. At the first time it's good, but has some kind weird temperature and brightness control.
Would 3 of these be good for a wedding reception video lighting?
I love your videos. You inspire me to be excellent and I hope I have the same effect on others in my content!
How about Nanlite Forza 60?
Godox actually just started putting quieter fans in their SL-60W’s, just wanted to throw that out there.
Poor man's 120D , Godox SL 60 😁 , love it so far
nicely spoken, very cool!
Hey Gerald! I have an off topic question. Does anyone make a good camera with decent video capabilities that would, for example, stay trained on me while I mow the lawn? I have a big lawn, so it would need to be able to zoom & rotate itself. Now that I think of it.... it would need to have the ability to be controlled from my smart phone so I can ensure it's doing it's job, has enough battery left, can switch from video to still, etc. Or do I still need a guy for that?
Enjoyable!
Could someone recommend a good light for Rim and Background lighting for Photography? One that can be powered by battery.
My major dilemma is panel vs COB LED.
Thanks man I’ve been looking for a light for a while I really want the aperture 120 D Mark two but it’s really expensive
You mentioned that the output wasn't even close to the aputure 120d Mark II, but what about the original 120d? Alot of folks still have that and the output from that is enough for a lot of folks needs.
Plus I think you mentioned its brighter than the good and from what I remember the godox is ssssuuupppeeeerrrr close in output to the original 120d.
Hi, Alex. It's about 2/3rds of the 120d II. I get similar results at 100% to what i get at 60-65% on the 120d II. If that helps. And about 30% on the 300d II.
@ 6:52 There is a definite (if slight) purple shift compared to the 300D?
Which somehow seems entirely appropriate for your channel!
👍💜🤣
FILL a need! I love camera puns :D
Can you review sutefoto p100 rgb light?
These lights are getting better and better but keep running into these kinds of issues. The Godox is good for the price but the airflow design is horrible for thermals and suffers a similar weak yolk and louder fan than one would want.
Would love to see a video trying to DIY tackle the sokani's issues such as replacing the fan & thermal compound with higher quality ones, beefing up the yolk much like your washer trick and figuring out if a v-mount battery rig would work and for how long it would power the light. Then compare the total price and time it took to fix the sokani vs the price of a 120d mkii.
How come you don’t say in the beginning if you bought this light or it was sent to you?
Opinions on this Vs the Godox SL60(w) Gerald?
Are you tried the Jinbei LED EFII-60?
Intro line "Today is the end of days, and I am the reaper"
What if compared to the Godox SL60W?
Shoelace tie to pole or vmount/counterweight to balance if you have big modifier like dome to prevent sag, ghetto it up. Totally theoretical and I'm chatting out me arse.
Also getting my first light, gonna go for f7, got a UK affiliate link?
So how would this compare with the Intellytech version?
The white balance advertisement of 5600K is actually off by about 400k. It's more like a 6000K light. Still good but worth pointing that out.
RIght on!
Salesman at remote control factory : "Hey boss I finally sold all those 30 year old remote controls we've had in back all this time. I'm taking the rest of the week off."
Can't you just reduce the kelvin on it to offset the cooler temp?
The A/C plug is Chinese. Physically compatible with ungrounded North American outlets, but lacking holes in the prongs, and unpolarized (same size prongs).
Thanks for the info. I thought China used those angled ones. Maybe they have two designs?
actually three - Aussie slanted 3 blade, Japan/US 2 blade, and 2 small round pins
I am curious if that light could hold a Light Dome Mini.
It does, yes. I tested it on the Light Dome Mini II and it was fine. The washer trick helps though.
@@geraldundone Nice! As someone who has to carry a lot of their own gear a light dome mini and this thing for interviews would be sweet.
@@geraldundone Ah watching your video again you mention the light dome mini.