Hi Peter, I am thinking of building this speaker so appreciate your effort and lengthy explanation. That's your style so keep it that way. I agree its about putting the hobby aspect back into hifi. More close ups, and photos please in future videos would help. How about a video showing how you will seal and paint them ?
Thanks for the feedback, Rhys. My cameraman is a tripod, thus the close-ups require some finagling. Photos are easier. I'm hesitant to get into how I spray finish much because the products I use aren't commonly available. My aim is to keep within reach of DIY. To that end I've pointed folks toward this channel that someone suggested to me: th-cam.com/channels/l5TLlEtAHzMUsXyEmbmw-w.html
I like to have a damp rag handy to clean up excess glue on particle board, but your right that it’s not the best practice for grained wood construction. But you have to be careful not to saturate the particle board. Your tip of using your fingers to check that your joints are evenly clamped is a good practice because your fingers are a more accurate than your eyes in this application. Wish you would have given your viewers some more tips on using a router, as they can be tricky for a newbie woodworker. Hobbyists might check their local rental shop for clamps, might save some money over buying them, maybe router too.
Pete thanks for your great videos. Don’t shorten them, stay detailed. I want to build the Extremes but am a little uncomfortable with whole process. Do you sell the flat pack for extreme so I could try to pull off the build before I jump in with both feet...does not see Danny just sells the flat pack. Tried to look up Reference north audio but could not find a site.. thanks in advance. David Keys
Great video! I am planning on building these speakers for my home recording studio. in early 2021. You have provided good clamping points per quality fit thank you. I have ideas per some assembly modifications. What are you thoughts on the following. Mounting the configured crossover the cabinet with the wiring in place? l I don't understand why many who make cabinets don't do it this way to save some awkward contortions to get the cross over mounted well in the right place. The second item would be to adhere the norez dampinging in the cabinet panels prior to assembly as well again just ease of assembly. Last doing the routing edging on the panels ahead of assembly as well. Thoughts?
I might pre-fit crossover board before cabinet assembly to ease installation later but I wouldn't want to finish cabs with it in place unless there was no other way. Same goes for NoRez. The only place I can imagine profiling edge prior to assembly is top and/or bottom of baffle if that's desired. All else needs to be flush trimmed after assembly.
Thanks for the great video! My NX-Studio kit just arrived so I’m trying to do as much studying as I can before starting. I’m curious, was it challenging to install the no rez inside after gluing everything together? I was thinking of gluing all panels, except one side panel, together, installing no rez, then gluing the remaining side panel on. Is that not advised?
I don't find it all that difficult to work through the woofer cutout when installing NoRez. Many have done it. The flatpack is designed to be glued up in one operation. Anything else and I suspect you'll run into problems and possibly a disappointing result. NoRez installation does not have to be pretty nor precise.
@@carbidetooth thanks for the advice! Seems like everyone says it’s best to glue everything together all at once. Guess I’m gonna need to buy more clamps coz I only have 4 right now!
I’ve had a pair of these for a while now, they are really fantastic speakers (obviously, coming from Danny). Their bass only goes down to about 70 hz or so, so get/have a sub.
@@carbidetooth No reason to be sorry I was hacking you, most people will need that type of instruction because no one knows how to do anything anymore. As someone said below make all your videos just like that. I do think that the average guy/girl will freakout when they see how much those clamps cost LOL!
*_Wow! ...There are always two ways to explain a process, one is simple, the other is confusingly complex... You have certainly excelled in the latter._* 👀
@@carbidetooth *_Theoretically, there are only two ways to explain something; 'Subjectively' & 'Objectively' However, you have managed to find a 3rd way._* 👀😵👈
I doubt I'd be your best resource for such info, but to my ears, this tweeter and unique implementation deliver a detailed presentation without sounding harsh or bright.
Do you think the NX-Studios would be fit for a stereo setup in an apartment, without a sub? I am not interested in high volume at all, but I am curious if they have some bass and can be used as they are or just lack it completely and you require a subwoofer. Thank you, appreciate it!
I've been listening to a pair without subs for a couple of weeks now, Alex. Fear not, they have solid, tight bass. I can see being very happy with them by themselves.
@@Jonathan-ff4wo I’ve never used those personally. Monoblocks would definitely work but probably a little overkill, theyre usually required to drive very low impedance speakers with lots of watts. The nx-studios aren’t hard speakers to drive, might save a little cash for your next kit 😉
Great video/instructions. Am considering trying to use blocks and ratchet straps to clamp these up. Has anyone done this? Also, one method of removing glue squeeze out is to press sawdust into the freshly squeezed out glue. The sawdust absorbs the glue and rubs off the project--Next Level Carpentry (also on TH-cam) demonstrates this method.
Band clamps have been used, but not by me. I gave it a try on a dry fit-up using this clamp www.bessey.de/en-US/BESSEY-Tools-North-America/Products/Clamping-Tools/Strap-clamps/Variable-angle and just didn't have the kind of opposing pressure and control I'm accustomed to with linear clamps. I may try the sawdust thing.
Brad, this flat pack isn't one I produce. Contact Jay at Reference North Audio and he'll hook you up. His contact info is in the video description and I'll post it here as well: captainhemo@shaw.ca
But then you could clamp more stuff to justify the expense...problem solved! But that's coming from an admitted tool junkie, so best taken with a grain of salt.
Thank you for posting the video but I can't see what's going on. As beautiful as your face is, we don't need to see it. You could film the whole video with a close up camera and this would help those who aren't confident woodworkers. I am an experienced woodworker and I struggled to see the important details.
Richard, I'm aware my style doesn't suit everyone and there are things I could do to improve videos. My videos and I are certainly works in progress. If you have specific questions, I'll do what I can to shed some light.
U are a pro and u made 5 mistakes ....I was thinking of buying diy speakers from Danny but from what I see wood work needs lots of money on clamps ...big set back
Perhaps, but I learn something from each. I imagine woodworking and DIY isn't for everyone. I find pursuing my passions to be fulfilling and encourage others to do the same.
@@scottcarlon6318 I appreciate the suggestion but small equipment rental places are pretty rare here in upstate NY. Even Home Depot has equipment rental at only select locations; none around here.
Thank You Peter! My
flat pack went together as expected and the video was essential for a successful result.
Cool! I'm glad it helped.
Hi Peter, I am thinking of building this speaker so appreciate your effort and lengthy explanation. That's your style so keep it that way. I agree its about putting the hobby aspect back into hifi. More close ups, and photos please in future videos would help. How about a video showing how you will seal and paint them ?
Thanks for the feedback, Rhys. My cameraman is a tripod, thus the close-ups require some finagling. Photos are easier. I'm hesitant to get into how I spray finish much because the products I use aren't commonly available. My aim is to keep within reach of DIY. To that end I've pointed folks toward this channel that someone suggested to me: th-cam.com/channels/l5TLlEtAHzMUsXyEmbmw-w.html
I’m glad I bought the speakers fully assembled.
Really fantastic and comprehensive.
I like to have a damp rag handy to clean up excess glue on particle board, but your right that it’s not the best practice for grained wood construction. But you have to be careful not to saturate the particle board. Your tip of using your fingers to check that your joints are evenly clamped is a good practice because your fingers are a more accurate than your eyes in this application. Wish you would have given your viewers some more tips on using a router, as they can be tricky for a newbie woodworker. Hobbyists might check their local rental shop for clamps, might save some money over buying them, maybe router too.
Very cool, wish I had the space to do builds like this!
Very informative! Thanks so much.
I always use water distilled from the clouds of Venus. A bit expensive but worth it. 🤔😉😂
Nice size for head unit for a 3 way too.
Pete thanks for your great videos. Don’t shorten them, stay detailed. I want to build the Extremes but am a little uncomfortable with whole process. Do you sell the flat pack for extreme so I could try to pull off the build before I jump in with both feet...does not see Danny just sells the flat pack. Tried to look up Reference north audio but could not find a site.. thanks in advance. David Keys
David, you can email Jay at RNA and he'll hook you up. His contact also in video description captainhemo@shaw.ca
Great to see a video with length and detail! The 30 second build a speaker(or anything) video just doesn't work for me.
Great video! I am planning on building these speakers for my home recording studio. in early 2021. You have provided good clamping points per quality fit thank you. I have ideas per some assembly modifications. What are you thoughts on the following. Mounting the configured crossover the cabinet with the wiring in place? l I don't understand why many who make cabinets don't do it this way to save some awkward contortions to get the cross over mounted well in the right place. The second item would be to adhere the norez dampinging in the cabinet panels prior to assembly as well again just ease of assembly. Last doing the routing edging on the panels ahead of assembly as well. Thoughts?
I might pre-fit crossover board before cabinet assembly to ease installation later but I wouldn't want to finish cabs with it in place unless there was no other way. Same goes for NoRez.
The only place I can imagine profiling edge prior to assembly is top and/or bottom of baffle if that's desired. All else needs to be flush trimmed after assembly.
Thanks for the great video! My NX-Studio kit just arrived so I’m trying to do as much studying as I can before starting.
I’m curious, was it challenging to install the no rez inside after gluing everything together? I was thinking of gluing all panels, except one side panel, together, installing no rez, then gluing the remaining side panel on. Is that not advised?
I don't find it all that difficult to work through the woofer cutout when installing NoRez. Many have done it. The flatpack is designed to be glued up in one operation. Anything else and I suspect you'll run into problems and possibly a disappointing result. NoRez installation does not have to be pretty nor precise.
@@carbidetooth thanks for the advice! Seems like everyone says it’s best to glue everything together all at once. Guess I’m gonna need to buy more clamps coz I only have 4 right now!
I’ve had a pair of these for a while now, they are really fantastic speakers (obviously, coming from Danny). Their bass only goes down to about 70 hz or so, so get/have a sub.
Did you use the kit or make directly from plans?
Thanks! I like to do that. But when I add up how much I have to spend on clamps I can buy some expensive finished speakers...
But you can use the clamps again and again. Saying you have too many clamps is like saying you have too many hands!
You might check your local equipment rental shop.
@@delbertcody9154 Meaning, probably not gonna use 'em again.
As a cabinet builder I have decided after one hour of watching to start drinking again. I shall return!
Sorry about that. Brevity is not my strong suite!
@@carbidetooth No reason to be sorry I was hacking you, most people will need that type of instruction because no one knows how to do anything anymore. As someone said below make all your videos just like that. I do think that the average guy/girl will freakout when they see how much those clamps cost LOL!
Great information thank you , I wish I had all those clamps 🥲
*_Wow! ...There are always two ways to explain a process, one is simple, the other is confusingly complex... You have certainly excelled in the latter._* 👀
I imagine there are more than two ways. My way will appeal to some, others not so much. For sure it's borne of a desire to be informative.
Ya mean latter?
@@thomasmleahy6218 *_Thank you, Thomas, I would not like my spelling to define me._* 🙉👀
@@carbidetooth *_Theoretically, there are only two ways to explain something; 'Subjectively' & 'Objectively' However, you have managed to find a 3rd way._* 👀😵👈
@@phoenix11994466 Yes, the road, (maybe a lot), less traveled. Consider it my gift to you.
How good are the analytical capabilities of this speaker compared to a genelec for example?
I doubt I'd be your best resource for such info, but to my ears, this tweeter and unique implementation deliver a detailed presentation without sounding harsh or bright.
@@carbidetooth thanks..
What does the Reference North Audio FP cost? Very thorough & well done video. Thanks!
Mark, contact Jay at RNA.
captainhemo@shaw.ca
Do you think the NX-Studios would be fit for a stereo setup in an apartment, without a sub? I am not interested in high volume at all, but I am curious if they have some bass and can be used as they are or just lack it completely and you require a subwoofer.
Thank you, appreciate it!
I've been listening to a pair without subs for a couple of weeks now, Alex. Fear not, they have solid, tight bass. I can see being very happy with them by themselves.
@@carbidetooth I think you sold me! Thank you so much for the answer! I will be considering between these and the wharfedale Linton's.
Awesome video. Thanks!
Better than a knob would be a small strip of leather or cloth ribbon tacked to the underside and left poking up through the gap.
I wonder if they would sound better with a port in the front or rear of speaker for bass?
In a word, no. It was designed as a sealed speaker.
Is it offered already assembled and what the cost is?
Wayne, I have assembled a few of these for people. Email me for info. carbidewing@gmail.com
Anyone know of any musician gear that would power a pair of the NX-Studios well? Great video! I've been waiting to hear more about this speaker!
I use a Bryston 3BST, really fantastic amplifier. Grabbed mine for under a grand on ebay
@@MrClubgibson great! I'll look this up! I've been considering using the Starikson monoblocks by orchard audio.
@@Jonathan-ff4wo I’ve never used those personally. Monoblocks would definitely work but probably a little overkill, theyre usually required to drive very low impedance speakers with lots of watts. The nx-studios aren’t hard speakers to drive, might save a little cash for your next kit 😉
Great video/instructions. Am considering trying to use blocks and ratchet straps to clamp these up. Has anyone done this? Also, one method of removing glue squeeze out is to press sawdust into the freshly squeezed out glue. The sawdust absorbs the glue and rubs off the project--Next Level Carpentry (also on TH-cam) demonstrates this method.
Band clamps have been used, but not by me. I gave it a try on a dry fit-up using this clamp www.bessey.de/en-US/BESSEY-Tools-North-America/Products/Clamping-Tools/Strap-clamps/Variable-angle and just didn't have the kind of opposing pressure and control I'm accustomed to with linear clamps. I may try the sawdust thing.
How can I purchase this from you?
Brad, this flat pack isn't one I produce. Contact Jay at Reference North Audio and he'll hook you up. His contact info is in the video description and I'll post it here as well: captainhemo@shaw.ca
@@carbidetooth thank you sir.
Hi Peter
Love your workmanship!
Are you open to building FP for me if i purchase from jay and ship to you?
Thank you for your consideration.
Best to email me: carbidewing@gmail.com
I knew it. It's all about licorice
Yeah, I guess the cat's outta the bag now...
Professional ! I would use books for clamps LOL
Been known to use dumbbell weights
The only problem is I a going to have to buy $500 worth of clamps!
But then you could clamp more stuff to justify the expense...problem solved! But that's coming from an admitted tool junkie, so best taken with a grain of salt.
Hi Peter! Very good videos. But why couldnt you build a floor standing encore with a little more bass. Kind Regards/ Mr Johansson
You mean the X-SLS? I've built it a couple of times. Here's a link to thread on Audio Circle:
www.audiocircle.com/index.php?topic=100369.0
Hi Peter! Yes that is correct it would be great. In meantime I will look into the link you gave me. Mary Thanks !
Kr / Johansson
Thank you for posting the video but I can't see what's going on. As beautiful as your face is, we don't need to see it. You could film the whole video with a close up camera and this would help those who aren't confident woodworkers. I am an experienced woodworker and I struggled to see the important details.
Richard, I'm aware my style doesn't suit everyone and there are things I could do to improve videos. My videos and I are certainly works in progress. If you have specific questions, I'll do what I can to shed some light.
U are a pro and u made 5 mistakes ....I was thinking of buying diy speakers from Danny but from what I see wood work needs lots of money on clamps ...big set back
Perhaps, but I learn something from each. I imagine woodworking and DIY isn't for everyone. I find pursuing my passions to be fulfilling and encourage others to do the same.
Might check with your local equipment rental shop.
@@scottcarlon6318 I appreciate the suggestion but small equipment rental places are pretty rare here in upstate NY. Even Home Depot has equipment rental at only select locations; none around here.
Hoover? no?why mask? too complicated? :)
Secret code ?
TALK TO MUCH BRUV,
YU WELCUM BRUV, !