How I COMPLETELY restored my Foxbody for $200 in two days
ฝัง
- เผยแพร่เมื่อ 14 พ.ค. 2022
- I took the time to bodywork and paint the entire front end of my Foxbody Mustang! After two days and a lot of work, I can say I'm SUPER proud of what I accomplished.
-
SHOP NOW: www.nineoninespeedcompany.com/
-
FOLLOW ME ON INSTAGRAM!
@thecraig909
@carrnagge
-
SEND ME STUFF! (If you want)
TheCraig909
P.O. Box 362
Ramona, Ca
92065
-
Check out these Classic Uploads!
-Open Headers High School's Reaction!
• Open Headers High Scho...
-Pulling A Rare Jeep From The Weeds!
• Pulling A Rare Jeep Fr...
-My F100 NASCAR Conversion Is FINISHED!
• My F100 NASCAR Convers...
-My F100 SHUTS DOWN AN IMPORT MEET!!! CRAZY FIRE
• My F100 SHUTS DOWN AN ...
-We Found a RARE SVT SUPERCHARGER In The JUNKYARD! Best Junkyard Find Yet!
• We Found a RARE SVT SU... - ยานยนต์และพาหนะ
I agree with you on the finishing a project. I been working hard to save up over the last two years to rebuild my first truck. I’m 16 and a half and it’s near road legal. Just need headlight wiring repair a mirror ac lines and driver window repair. And little odds and ends. Pretty good for having to replace the entire body on my first truck. And I’m still in it for under $3000 the 1993 Ford F-150 is the best it has been in years.
Marked improvement overall. Don't beat yourself up too much on running short on paint - all of us who do this stuff have had our moments where we come up short on materials or other stuff. Car looks great.
This video made it clear that Craig operates just like I do. Constantly beating myself up about things not being perfect, but as long as they're better than they were, it's still a win. I'm the exact same way about my 87 V8 Ranger that I've been working on for years now. Keep up the good work Craig.
Thank you man.
I think your issue was too high of air pressure, a lot of that paint was flying away. Also get a little closer to the car looks like you were 12 to 14 inches from the panel.
I lowered the pressure on the clear and it definitely laid better I noticed.
A good compressor goes a long way in a good spray job. One that makes 7cfm @ 40psi is the bare minimum. Overall it's a good 20 footer. You'll get better if you keep at it
You mentioned some people not finishing projects, I think the key is to start off with a few smaller projects, finish them, then eventually move on to bigger projects. Gotta have a few wins and gain some confidence! I too have seen some people just rip into a car, disassemble it with good intentions, then never finish it. Good for the next guy who buys it!
Where this 5.0 started when you picked it up vs where you got it at is A Sh_t Load of an Improvement. I think it is an awesome daily driver. It looks and sounds amazing 👍🏻💪🏼💯😁
Thanks!
Baby steps to perfection. Learning with each step. Thanks for sharing the details even if you feel it isn't your best work. It's harder to be TH-camr than most people know. I feel your pain.
That mustang looks so good. And that Cleetus McFarland approved hood latches are awesome lol.
They work awesome. Thank you!
If it looks better then it's not too bad. Body and paint takes time to master . If you don't want to mess with primer grab a qaurt of sealer, spray it then your paint sprays over it no sanding it will help avoid alot of problems. It's not bad for your conditions I've fixed worse for people. Keep up the good work.
I turned 16 in 1987. I've always had at least one fox body in the stable since. Never perfection... These are the ultimate working man's car and you can make it what you want it to be. Have owned my 89 LX vert (5.0 T5) since '94, Got my son a '90 2.3 we converted to a 5 speed turbo coupe motor. We enjoy looking at the imperfect cars mostly and conversation at shows/at the track. Your work marathon's are a fine inspiration. Carry on bro' !
Great job! Your car looks so good. Perfect stance and wheel/tire fitment . Nice!
So what we need now is a good ole video with a in depth go around on the next steps with your vehicles and what the endpoint for each are and what you want out of them. Love the content and the commentary keep goin bro!
Good afternoon Craig good to see the truck
Nice work and a huge improvement! And I'm glad you're helping motivate people to get their projects done, but time really is a limited commodity sometimes, especially as life gets more complex and complicated with the demands of work (especially if you run your own business), maintaining relationships, having kids (if you do), and looking after aging parents. That's why you've really really gotta respect the folks that finish a project that's been going on for 15+ years... they've persevered and kept the faith. Just don't take for granted having the freedom and time that being young and unencumbered provides.
And as I mentioned please make sure you got people to help spot where the car goes and help push and stop the vehicle. Above all watch yourself and your fingers that you don’t get hurt while doing the push by wheel/tire method. It is a good way to use in tight small areas if you don’t have those wheel dollies to put under the vehicle to move in small places.
I appreciate your videos! It’s a relief to have this content.
You are Fantastic! Self taught, not afraid and consistently ending up in the front. Impressive and Inspiring. Thanks for sharing these adventures and congratulations on Nailing your Finals and these rides.
If you want a tip on pushing cars in small areas that are hard to push. It’s very easy to roll the car by putting hands on the tires and rolling the tire, the vehicle will then move. But do this on level ground with people around the car to help you spot the car where to go and stop car when needed. Obliviously have someone inside car to steer and bake if you can have extra help. Don’t do the roll wheel/tire push on your own with no one around to help spot where the car goes.
And please do this only in small level areas with people around to help spot where the car goes, help push and stop the vehicle
Excellent work for what you were working with young man! I have a 77 Buick Skylark that i've been daily driving the past 15 years I'm getting ready to repaint it. I'm using the Duplicolor ready to spray paint though, I've used it on panels before and it works pretty well but this is the first time I'm laying down a complete paint job with it. I'm going going from white to a medium silver that i'm going to mix up myself because all they have is bright silver so I'm just going to throw 3 quarts of silver and a half quart of black in a empty gallon can and use it, it is what it is at that point, it's a daily driver i'm not doing a show quality paint job. I'm hoping less than $250 all in for the paint job. My interior is that medium dark red and it's in excellent shape so I gotta go with a color that matches that so my choices are basically White, Black and Silver so Silver it is.
Great video Craig, love the attitude. I’ve learned so much just trying to figure stuff out myself and just doing it. You’ll only get better. Great chatting with you at Heatshield.
Dude that car turned out great be proud of it looks really good keep on keeping on my friend you can do anything you put your mind to
The fox looks good. The fender with sanding marks gives it some character. Can't wait to see the F100 back together with the new motor. Great content and keep up the good work.
Always good to see dad lending a hand... back, knees and blood pressure lol
Don't kick yourself, you did a fantastic job for an open air paint job. We have always called that a ten foot paint job. It looks flawless ten feet away. 👍👍 Great job, mixing cups and strainers are your best friend when spraying.
Craig, your Fzbody looks awesome! I love every bit of it! Can’t wait for the Galaxy to be done, or even the Town Car! Keep rocking
I think a lot of us are perfectionist and that's not a bad thing. Like you said- we learn by doing. Don't be afraid to learn. The car turned out great considering the time table & kamikaze bugs. Much better than the heater vibe it had. Thanks for sharing
Great job! Love your motivation. Keep at it, you will continue to improve. 👏
Good to see a young person motivated
It turned out good. For doing the paint job outside, it looks great. The Kelly Kapowski freshener ....NICE !!!
Man Bravo, I got a 86 gt pretty rusty, 260k on the 5.0 still screams, no ticks, knocks, rebuilt AOD 3rd tranny bought it in 92 5k on it, want to do mine lol! I was very impressed with your work, confidence and determination Bravo!!
100% agree with you on the projects part haha I followed you because you straight piped the f100 in highschool. Right after that I bought a 1972 gmc and it's been one hell of a ride 5 years of blood sweat and tears. Right now I got a blown sbc in it and slowly build a 355. 400 to 450 horse.
Audience,I know you got over the paint job by now, but it was a beater bomb at first. I think you brought it back from hell. Great Job and Kudos on the repaint, if you still decide✌🏼.
Great job! Enjoyed the video!
Awesome job Craig… hats off to you
Great work, I love the videos. You are inspiring me to work on my mustang.
Definitely nice seeing it all looking great again. Great job!!!
The OGs know who that is on the air freshener but it looks damn good bro just cut and buff it
Heck yeah! Looks great man!
As a student at uti, I've got finals every 3 weeks, so I feel you. I also bedlined Montero in a parking lot so I feel that too
Great job!!! Looks Great !!!
Damn dude, I’m impressed with the outcome!
Just wrapped up one of my NewEdge builds it’s definitely a good feeling
Looks good. Almost enough to get me liking fox bodies. The interior turned out great
Big rig lays great too on paint. I use it for subframe and Tunnel.
You did an amazing job Craig don't beat yourself up..it looks way way better then it used to..a little cut and polish it will look amazing
Great job buddy!!!
Just looking at the thumbnail alone, that Mustang looks 1000% better. Awesome job Craig
First video I've seen from this channel & I approve the introductory clips at the beginning 🤣
Great job, my pops used to call those a 50-50 paint job. Looks good at 50 feet moving 50mph moving away from you. Actually looks good Craig!
Looking great man I know it wasn't easy I need to get mine prepped for paint
Looks good... congrats love the Mustang and f100
Great job!!!! I still wish you’d do the galaxy like that, but I do understand your concerns.
Looks great, nice job
Love the content man, I’m in college too and I don’t understand how you do everything you do
Progress doesn't require perfection. Looks fantastic from here....!
Looks great dude. Always motivating to watch your videos. Couple beers, I'm ready to go.
There is a lot of half done car out there. One problem in Nebraska is that if you don't have a building you are limited by weather so you are constantly starting and stopping. This has to be one of the few places that you can stand in a mud hole and have dirt blowing in your face lol. But that is also no excuse for lack of desire. Where there's a will there's a way
Makes me want to paint my Foxbody. Thanks for the inspiration.
Big transformation 💪💪💪
You could've hung tarps from your gazebo thing, make an impromptu paint booth.
Also helps keep overspray down, so you don't tint the side of your parents house haha.
Laying down paint takes practice plus gun settings,tip size etc. also matter but I digress overall result looks great
Kicking ass and taking names proud of you.
Looks great!
This is super cool build get your hands on some black epoxy sealer next time over reduce it then shoot your base.. it will help coverage and use less base color.. good luck
I shaved the antenna hole as well…looks a lot better. Fox Looks good. Black is the best👍
Buddy I really like the way the stang turned out looks great
Looks really good. A shot of black on those rear quarter window trim and you’ll be set.
Looks good for an outside spray!
Oh Craig we worship you!
Very nice. Be proud 👏
For what you have to work with it looks good.
Nice work man!. I'm on a budget and considering to paint at home with one of those inflatable paint booth. Nice to see those successful folks like you are out there :)
Gotta say, you gave me some anxiety between min 7:35 and 7:53. Specially at 7:51, that was close lol
Great job Mr. Craig!
You’ve always been one of my favorite people to watch be you’re quickly becoming the first one to click on
looks awesome for a 11:30pm job. congrats
No biggie to give it another quick sand and try again. The clear is a good base to respray another base coat on. Good job man it looks a million times better.
wow, lools like and and day, great job, your an inspiration to all, you should be proud
I got 9 stitches about 8 years ago doing pretty much the same thing as you were (when you found the 1/8" of cracked filler), except the knife blade buried into the soft fleshy part between my thumb and 1st finger. I still don't have full range of movement.
Good work brotha
You did a great job man! It looks great! Hey If I could I would hire you to do my body work and paint
Try some of that vht on the quarter window moldings just a thought
That looks bad a$$. Black has got to be the hardest color to paint. I've waited 10 yrs to paint my 64 f-100 green! Car has come a loooong way and came out great.
compared to before and at that cost its great, now the GALAXY!!!
Great job 👏
I spray at 32/35 psi. At the end of the day it looks good from the drivers seat. No more red
Dad asking his son "Are we there yet??" Best 5 seconds ever uploaded to TH-cam.
Good day brother. Your a good dude man. Cool channel keep up the great work brother 👍
She looks awesome…good job sir
Your car is miles different from the last butcher owner. You have saved another beautiful fox body. All I have is a 67 coupe with a real hi-po 289/4 speed/posi etc. It has 36000 original miles.
This young man is no lazy azz, he's highly driven with a disciplined intellect. Thanx 4 letting us follow the journey Craig.
I appreciate that.
I like it. Good job Vato
Nice work 👍.
Looks Wayyy better.
If it looks good from 4 meters away and you plan to repaint it, I'd call it a win. Lessons learned in the trial run, ready for a quality spray layer. Just use high fill primer next time, it helps.
U have really helped me with my projects how is the f100
Good motivational speech 💯💪
Looks decent all things considered HUGE improvement!
For a do it yourself it looks good. Like the stance what size rear tire are you using
Those dad shoes have all the grip! Time to upgrade Craig!😂
I think it turned out pretty damn good for it to be outside 👍👍