Scooter crank seal install
ฝัง
- เผยแพร่เมื่อ 17 ก.ย. 2019
- Here we show you how to tell if you need fresh crank seals. With the older bikes, its extremely common to have failed seals. Rubber only lasts so long. The older first gen zuma is almost always in need of seals. Just make sure you don't nick your crank, and/or the case itself. this is a very easy task!
we stock honda, piaggio and yamaha oil seals for most 2 stroke scooters at
www.scooterswapshop.com
If you need oil seals for other bikes, we have them in stock at
www.scooterpartshop.com
thanks everyone! - ยานยนต์และพาหนะ
This is the only video that has done both sides !! I could’ve find a video on the web for hours and days but thanks y’all deserve a like and subscribe
you guys rock! best Scooter experts of this continent!
Thanks a million!
Love how you give in depth explanations. Giving a why it's done like really helps people understand things better. Good job guys
Thanks make sure you are Subbed for more vids!
Wow this saved me hard, by far one of the best tutorials and just another reason I only buy from you guys!
Great video - both sides - very helpful.
Thanks for good information, very good guide
Thanks, just learned something new
awesome!
Super helpful video! Does the outside diameter of the oil seal need to be lubricated?
Awesome video
cheee
It's impossible to over state how much easier it is working on scooters when you're working at waist height instead of lying down
Hahah yeah it helps!
Very helpful. You answered the 3 questions I had. #Pro 😎
good video
👍
thanks!
Excellent tutorial guys! The info is much appreciated. I am looking to order a crankshaft, seals, and bearing kit for a 96-97 Piaggio Typhoon 50. Also a new clutch and bell. I see that there are variances from pre 98 engines to post 98 (hi-per 2) when it comes to variator parts. Im curious if i can use the readily available Polini crank you have for sale and if it will fit the older (TECH1M) stamped case on my 96-97 Typhoon and will my variator fit and shim up the same. I only ask because i hear that the variators are different and i wasnt sure if it was the crank taper profile (shaft size actually) that created a need for a different variator. Thank you much and ill be ordering from you guys.
For detailed stuff just send us an email and we can work you up a parts package
@@Scooterswapshop
Excellent....ill be there. Thank you
The best video ever made!
.
.
Also are there any weak spots in the engine? (like starter clutch rattling because its dirty) :)
what exact motor are you asking about?
minarelli horizontal
What size internal c clip does it take? 1 5/8?
Very good video is this the same for
Yamaha aerox ? Could you reply please
Yes
nice video +1
thanks
do u know how deep the seal should seat on piaggio on the ignition side cuz there is no any indication or line.
would need more info to give you a answer and photos
Not sure whether you guys are still responding to comments, but what's the depth that your seal installation tool pushes to? Can you provide dimensions for that seal driver tool? I can't find the tool on your website now, nor can I find any information on what that measurement is. I'm trying to do a variator-side seal on a 2005 Yamaha Zuma 50.
we don't offer them any more as the cost to make vs what we can sell for didn't line up. didn't sell enough to raise the price.
Pls make a video how to tune a cvt for honda dio with final speed gears..mallosi 80cc and v8 pipe
Plsss I'm.over it
We have several videos on cvt tuning. They don’t make a 80cc for the Honda dio.
Hi scooterswapshop I want to build my 2 stroke scooter I would like to buy everything from you guys what would you recommend me to get first I want to get parts this is the number under my cvt transmission QJ1E40QMB-4 right know is all stock parts in it please let me know thanks and nice videos i always watch them good job 👏
call the shop!
I have a GTX/Jog....cant start it and only 40PSI...rings, cylinder, gaskets, carb boots etc all ok....the only thing I haven't checked are the oil seals....is it possible to lose that much compression from bad seals? Would the stator side seal be more likely to be causing low compression? Thanks
how are you checking that? we have. pressure test kit
compression pressure guage in spark plug hole
Hi my scooter doesn't do wheelie what do I need to upgrade ? Or change :)
have you watched the wheelie video??
How do i know if I have to replace them? I have a Kymco Fever II and it is very similiar
You’ll have symptoms of air leaks, trouble tuning and lean
@@Scooterswapshop thanks, really useful video
Hi. I need to change the thing in my Aerox. I failed twice.. It seems to be easy, (i use the secret trick) but i cant do it by first time and then the seal is fucked up. Can i use Polini Grease? Because with thin 2t oil it doesnt go well.
change what thing?
Can anyone please tell me whats the size of the circlip that holds the variator side oilseal?☹️
Not too sure what exactly you are talking about if you email or call the shop i'm sure we could get the part sent to you!
Woah I didn't know the seals on it could take a c-clip 0_0
That's all the excuse needed to add in a small turbo. The clips should help it hold in another 5psi. Now, will a 90/100cc 2 stroke be enough to drive a Vz21? That's the question.
turbo on cvt scooters just don't mix we have tried it doesn't make enough boost
Hy guys, I have a question, if my scooter looks like its not idling correctly, may it be because of old seals? Thank you
It’s possible. You need to do the basic troubleshooting first
So i have a 89 jog. Would it be about the same?
Yessir
So if goin bad will it smoke? I need that tool have a link?
Hi guys could you share the dimensions of the driver tool? I was thinking of 3d printing one from ABS or Nylon
We sell one for really cheap!
@@Scooterswapshop I wish I knew that when I ordered the seals, I got the flywheel puller.
@@56chevyguy simple search on our site you will find it. We just did a video on tools even!
@@Scooterswapshop I see it all now, I guess I should have watched the other videos.
Is that yamaha jog
Zuma
Crankseal2020
ok
Is this what’s causing oil leak ?
Hi there is no oil
Leak
who tucks like that
Jared. Can’t contain him :)
The old schoolers in Hawaii. That's known as the local boy tuck.
actually we wanted to see how to clean the bearings
You don’t clean the bearings you replace them
@@Scooterswapshop thank you for clearing this up i will get new ones
6:10 confused me
but thank you!
I
🔨🔨🔨🔨🔨🔨🔨
hammmmmmma
Removing seals, caveman style :/
This is how 99.9% of home builders will do it. We have a spiral seal style puller