This part number also applies to Samsung side by side refrigerator model # RH25H5611SR/AA. its not making ice but I keep pressing the reset button in the ice maker it moves but I notice no water is coming out of the protruding pipe.. Thank you for showing how to do it.
Would this valve allow water to not come out of the water dispenser? My water dispenser lets about a cup of water out then nothing comes out... Let me know what you think . Thanks ! Great video 👍
Don't know that I can agree with your coil resistance results conclusion. There are 2 different coils in your Red and Blue device and different ratings on each. I have compared readings on my current valves to a known good replacement. I get over 300 on one coil and around 180 on the other coil in both devices.
also a lot of OHM meters only go down to 200, the next one up is 2000, so using the beep or tone method should be more accurate which would skew the numbers.
Not a Samsung but Whirlpool inlet valve. 1 ohm so that is bad. The other of the dual inlet valve was 260 ohms. My main question was how do these valves work electrically? I disconnect the connector from valve and put the leads on the connector to test the voltage coming from water dispenser get 104 Volts when no water requested but 119V when water is requested . Is that normal? Same on ice water valve request connector.
Checked my water valve and it was good wondering if line is plugged water dispenses from water dispenser but not ice maker reset ice maker and heard the chime and it seams to be doig what it is supposed to?
hi guys, I have the same problem .I have water out of the water dispenser, but my icemaker received no water and product no ice. I reset the icemaker but nothing is happening. I have a Samsung RF28HFEDBSR/AA. I called Samsung Canada but as we know no buddy help you .any ideas thks mike
Monte in your comments are you providing the water control value part number of DA 97-07827B or is that for the ice maker unit? Disregard didn’t go far enough in the video. Having the same problem. Ice maker stopped about 2 days ago hit reset or test button got the chime, however every little too no ice? Also is the water control valve located at rear of the Samsun like in the video? Thanks for sharing.
![งมหอย จับปลา มือเปล่า หาอยู่หากินแบบวีถีอีสานกับแก๊งเซียนหรั่ง ม่วนคัก! [ขอนแก่น] @Sianstudio](http://i.ytimg.com/vi/JEJZg6N-AbU/mqdefault.jpg)
The part you replaced does not have the terminals exposed. How do you test on a part like that?
Super helpful. Thanks!
This part number also applies to Samsung side by side refrigerator model # RH25H5611SR/AA. its not making ice but I keep pressing the reset button in the ice maker it moves but I notice no water is coming out of the protruding pipe.. Thank you for showing how to do it.
Do you think the water inlet valve are the cause why it’s not filling water in the ice tray?
Would this valve allow water to not come out of the water dispenser? My water dispenser lets about a cup of water out then nothing comes out... Let me know what you think . Thanks ! Great video 👍
Yes
Don't know that I can agree with your coil resistance results conclusion. There are 2 different coils in your Red and Blue device and different ratings on each. I have compared readings on my current valves to a known good replacement. I get over 300 on one coil and around 180 on the other coil in both devices.
also a lot of OHM meters only go down to 200, the next one up is 2000, so using the beep or tone method should be more accurate which would skew the numbers.
Not a Samsung but Whirlpool inlet valve. 1 ohm so that is bad. The other of the dual inlet valve was 260 ohms. My main question was how do these valves work electrically? I disconnect the connector from valve and put the leads on the connector to test the voltage coming from water dispenser get 104 Volts when no water requested but 119V when water is requested . Is that normal? Same on ice water valve request connector.
Could this be why I get drinking water but no ice ?
Thank you that made the job very doable
Thank you, Dude.
Checked my water valve and it was good wondering if line is plugged water dispenses from water dispenser but not ice maker reset ice maker and heard the chime and it seams to be doig what it is supposed to?
Did you ever find out the problem? Our ice maker is doing the same.
Broken ice maker
hi guys, I have the same problem .I have water out of the water dispenser, but my icemaker received no water and product no ice. I reset the icemaker but nothing is happening. I have a Samsung RF28HFEDBSR/AA. I called Samsung Canada but as we know no buddy help you .any ideas thks mike
Does this valve when failed or getting ready to fail cause noise and also stop the ice maker from working?
Could
I am getting about 1.6oz of water from the valve. Is that normal? It does not appear to be enough water.
Change your water filtr
The terminals are not exposed on the coils on the electronic control valve in order to test them??? Samsung DA97-07827B
Monte in your comments are you providing the water control value part number of DA 97-07827B or is that for the ice maker unit? Disregard didn’t go far enough in the video. Having the same problem. Ice maker stopped about 2 days ago hit reset or test button got the chime, however every little too no ice? Also is the water control valve located at rear of the Samsun like in the video? Thanks for sharing.
G Grong most, if not all, have been on the bottom right on the ones I have worked on.
I have this same thing. How can you test the coil if the terminals are not exposed?
old valve reads 193 new valve reads 194 so those high numbers seem to be off.
Samsung should be sued for making these refrigerators like this. We had 5 ice makers replaced and it STILL don’t work.