STALKER Kraken TAC-41 TDC Hopup Chamber Installation Video Short
āļāļąāļ
- āđāļāļĒāđāļāļĢāđāđāļĄāļ·āđāļ 12 āļ.āļĒ. 2024
- This is a short video about the new STALKER Kraken TAC-41 TDC Hopup Chamber.
~~~~
ðĻMake sure to subscribe this youtube channelðĻ
~~~~
ðĒLinks to the products i use ðĒ
STALKER Kraken Tac-41 TDC Hopup
NL Shop
ðwww.skirmshop....
UK Shop
ðwww.skirmshop....
Spain Shop
ð
ðĒMy Ghillie Suits & Crafting MaterialsðĒ
ðwww.skirmshop....
~~~~
ðĒAll products i use are for sale at Skirmshop and approved dealers around the worldðĒ
ðSkirmshop NL: www.skirmshop.nl
ðSkirmshop UK: www.skirmshop....
ðSkirmshop Spain: www.skirmshop.es
~~~~
ðĒMy WebsiteðĒ
ðwww.stalkerair...
~~~~
ðĒRecommended Facebook GroupsðĒ
â Stalker Owners Group
/ stalkerowners
â Ghillie Crafters Group
/ ghilliecrafters
â Silverback Specialized TAC-41 Group
/ tac41
~~~~
ÂĐ Stalker is a registered Trademark and all my products designs are protected ÂĐ
You will all love the Complete Stalker tac its top notch
thank u!
I was probably the first one to order from Skirmshop! One minute after they came to stock. Super exited to get my Tac41 rocking!
Niksu, Good you are watching this video, next week we will make a in depth video about the installation and features. Many thanks for purchasing our product, it means you can expect more of these kind of upgrades on the market. Have a good day!
@@stalkerairsoftdesigns5716 Cheers! Looking forward for the in dept video.
Had you beat, skirmshop accidentally put it up 3 weeks ago and I bought it super excited then got an email that it wasn't available yet
i probably buy it before one minute sorry but nice try
At 1:24 you seem to tighten a 3rd screw yet you only indicate the 2 flat headed screws are used? There is only 2 flat screws in the box. Can you please advise why you have a 3rd screw?
Hi Chris, did you find the answer to this question?
hi thanks for asking. its not a 3rd screw. its the 1st and 2nd screw over and over again just a little bit until the set centers itself. it would be good to tighten one side completely and then the other set. so we advice to do it switched and devide the turns over the two screws until the inner barrel centeres and both screws get tightened at the same time.
Does the tool that you used to tighten down the cylinder head come with the Kraken? I havent seen it in any of the promotional material before.
It does not come with the kraken, we designed it to use in our tech department. If people like it we can release it maybe.
Especially that the cylinder head is a custom Stalker one, that tool should have been included in the hop up package, like silverback did for their cylinder head. 3d printing this would be a pretty low cost and would have been a nice touch considering the price of the hop up unjt
@@stalkerairsoftdesigns5716 Please do! Its kinda nice to have a tool perfectly designed around the cylinder head and to also have an easier grasp on putting the cylinder head on.
I will do it, have to see what kind of material i can use to make it affordable for the airsoft. TBC ðĪðŧ
Is this a whole kit. Just looking at the barrel and I have the original one.
You can find complete upgrade kits with our inner barrel on www.skirmshop.nl
Oir TDC unit works with GBB/VSR style barrel only
@@stalkerairsoftdesigns5716 thank you
Iâm trying to install this on the 330mm twist barrel from silverback and itâs not goi g far enough to where I can put on the TDC wheel or the bottom screw, do you guys have a solution for this? Iâve put a shit ton of force into it and itâs just not going any further
Whats that tool you use for the cilinderhead at 2:55?
We made some for our tech department and using it for over a half year now. Its nice and strong! Maybe we should release it for the public..
@@stalkerairsoftdesigns5716 pls i need this
Hi, I've fitted mine today but have x1 oring and x2 tapered grub screws left over. Have I missed a step?
No, its totaly fine! You need to check which O-ring fits the best on your cylinder because we think not all cylinders have the same diameter so we included two different O-rings for the cylinder head. 1 small, 1 bigger. For the screws, the pointy grub screws are for inner barrels with a small side cut, the flat grub screws are for stalker morpheus inner barrels and align the inner barrel a little better with big flat grub screws. Game on!
Do I have to have morpheus barrel for this? Or will the stock barrel work?
advice to use the stalker barrel cause all parts we make are made for eachother but, you can use our hopup with other GBB open cut barrels sometimes but the best performance you get out of our complete set because its made for eachother.
Is it just the outer edge of the screw on the bolt you need to sand down?
IF your bolt does not go down like normal but stif, then sand this bolt nut a bit down. This is the reason why your TAC41 is so silent after this installation, you make a FIXED setup so your bolt set does not wobble or moves when you are shooting. this means your setup is fixed and steady between receiver and front of hopup. all the shocks go trough the rubbers and there you go ;) good luck!
@@stalkerairsoftdesigns5716 thanks for the info, I have sanded it down but now after a few shots the spring guide stopper starts to pop out and I am unable to pull back on the bolt. Any advice?
@@benchapman2703 Hello, then you are probably use a short spring for the TAC41, maybe you can use rapax lightpull, silverback spring length or similar length spring, then your problem is solved. You can use short springs like rapax RMS but then you need a thicker bumper pad in the cylinderhead, we sell them in 3mm, 5mm or 7mm and right now you have 3mm. 5mm will eat a bite more volume but its a thicker rubber so it will absorb the impact of a piston slightly more than a 3mm rubber. The spring guide stopper of the TAC-41 needs the tension of the spring to be able to kept in place, if u use a shorter spring then you change the tension and then the guide stopper can wobble or in worst case, can fall out. You can choose one of the methods we wrote above and the spring guide stopper will be kept in place.ððŧ
@@stalkerairsoftdesigns5716 So I am using a Silverback m150 spring, do you think I need to switch it to a Rapax 2.2 spring?
@@benchapman2703 i use it myself as well works like a charm
hello , quel est ÃĐpaisseur du joint vert ?
www.skirmshop.nl/en/anti-shock-rubber-pad-set-3mm-111915562.html
Ce petit joint beaucoup de gens vont le nÃĐgliger pourtant ca va faire toute la diffÃĐrence niveau son
vous pouvez simplement utiliser l'ÃĐpaisseur que vous voulez, il existe diffÃĐrentes ÃĐpaisseurs disponibles. l'ÃĐpaisseur que vous obtenez est de 3 mm
i follow the video on YT a and upgrade stalker GBB hop chamber step by step.
other upgrade part are 420mm morpheus inner barrel+ rapax 2.8J spring.
when I tighten the hop ,fps go up. (max:168m/s)
loose the hop ,fps go down. (min: 155m/s)
whats the problem? air seal issue?
hi there thanks for upgrading with our parts. the thing you notice is normal, its called joule creep :) you can read a lot about it on internet.