Hi sir This is Sachin. I have been seen your videos for last 2 3 months and the great work you have been done. Your videos are really good and very helpful for all of us. Ya its really well n good for all ptc users. I also have been used a ptc creo from last 8 months from fresher and right now i get some knowledge about ptc creo bt their is one issue. Right now i am working on software that is creo 6.0 bt i hv a problem that when i design a components the one window it will atfer modification that "YOU HAVE 1 CIRCULAR REFERENCE " bt when i was using 3.0 that issue was not there in creo 3.0. Could you give me some information regarding this. Thank you
Please see this video: th-cam.com/video/IIyptGlVAQg/w-d-xo.html Modal Analyses allow you to calculate the natural frequencies / modes of an object (frequency at which they will resonate) and are often an input to many dynamic (time- and frequency- dependent) analyses.
I’m not that familiar with ANSYS Discovery Live but the distinction with Creo Simulation Live is that it’s available inside of Creo and enables real-time simulation. I recommend discussing with your PTC and ANSYS reps.
It is, I've bought it for $0.00 and read it in the online viewer fine. I do not own a Kindle or Kindle service. I have to admit I was confused at first but it does work.
Honestly I’ve done my hardest to make knowledge of Creo Parametric free. My books are always available for free if you have Kindle Unlimited. Five days a quarter I get to make them available for free even if you don’t have Kindle Unlimited. And I’ve put almost 250 videos available online for free on TH-cam and so far I’ve made a grand total of $11 from that - or less than 5 cents per video. Obviously I’m not recouping my expenses or being compensated for my time for my attempts to deliver Creo Parametric knowledge to everyone so please don’t begrudge my efforts to make this as free as I can possibly make it.
![Creo Parametric 6.0 - Creo Simulation Live - Assembly Thermal Analysis [2019]](http://i.ytimg.com/vi/1Y-QwWozQzU/mqdefault.jpg)
Alright, just for you, we'll keep the second free trial a secret between us.
:X
(And because your content is so helpful.)
Thanks, PTC!
Hi sir This is Sachin.
I have been seen your videos for last 2 3 months and the great work you have been done. Your videos are really good and very helpful for all of us. Ya its really well n good for all ptc users.
I also have been used a ptc creo from last 8 months from fresher and right now i get some knowledge about ptc creo bt their is one issue. Right now i am working on software that is creo 6.0 bt i hv a problem that when i design a components the one window it will atfer modification that "YOU HAVE 1 CIRCULAR REFERENCE " bt when i was using 3.0 that issue was not there in creo 3.0.
Could you give me some information regarding this.
Thank you
Thanks, Sachin. Have you seen this video? th-cam.com/video/nOUFMPal3Lg/w-d-xo.html
hey this question may be little out of context,but could you tell what is modal analysis and when to use it
Please see this video: th-cam.com/video/IIyptGlVAQg/w-d-xo.html
Modal Analyses allow you to calculate the natural frequencies / modes of an object (frequency at which they will resonate) and are often an input to many dynamic (time- and frequency- dependent) analyses.
A simple question: If I have Ansys Discovery Live on hand than does it make sense to buy Creo Simulation live too?
I’m not that familiar with ANSYS Discovery Live but the distinction with Creo Simulation Live is that it’s available inside of Creo and enables real-time simulation. I recommend discussing with your PTC and ANSYS reps.
Change your description Top to down ebook is not free
But your efforts are very useful
It is, I've bought it for $0.00 and read it in the online viewer fine. I do not own a Kindle or Kindle service. I have to admit I was confused at first but it does work.
Honestly I’ve done my hardest to make knowledge of Creo Parametric free. My books are always available for free if you have Kindle Unlimited. Five days a quarter I get to make them available for free even if you don’t have Kindle Unlimited. And I’ve put almost 250 videos available online for free on TH-cam and so far I’ve made a grand total of $11 from that - or less than 5 cents per video. Obviously I’m not recouping my expenses or being compensated for my time for my attempts to deliver Creo Parametric knowledge to everyone so please don’t begrudge my efforts to make this as free as I can possibly make it.
Sir creo aluminum Casting flow simulation related video share me sir
If more people contributed to my Patreon, I could afford a license and make some videos...
hi can u share me creo simulation video link... am the beginner in creo simulation