Creo Simulate | Optimization Design Study

If you enjoy my content, please consider supporting what I do: Buy a Coffee for 4KSide - ko-fi.com/vpalffy
or DONATE by www.paypal.me/4kside
WHY SHOULD YOU DONATE TO 4K SIDE?
More donation = more money
More money allows me to buy more coffee
More coffee makes me create more Creo Tutorials
More Creo Tutorials means more knowledge for you
More knowledge you have more productive you are
More productive so you earn more money
More money you earn more donation to me
More Thank you …
Vladimir Palffy - www.4kside.com/
... all of 4kside content with just one link: linktr.ee/4kside
Supported Channel: @doublewhitedots
Tags: #creotutorial #creoforbeginners #4kside #vpalffy #palffy #vladimirpalffy #how_to_creo In creo simulate we have several methods that can be used to improve the design:
• Standard Design Studies
• Sensitivity Studies
• Feasibility Studies
• Optimization studies
Optimization studies are closely related to feasibility studies. During the initial implementation of the optimization study, the optimization mechanism behaves exactly as it does during the feasibility study - that is, looking for a design that meets all design limits. When such a feasible design is found, the optimization mechanism then attempts to minimize or maximize the target function to end up with the optimal model.
Download steel_mechanica_lite.mtl file here: bit.ly/steel_mechanica_lite
If you enjoy my content, please consider supporting what I do: Buy a Coffee for 4KSide - ko-fi.com/vpalffy
or DONATE by www.paypal.me/4kside
WHY SHOULD YOU DONATE TO 4K SIDE?
More donation = more money
More money allows me to buy more coffee
More coffee makes me create more Creo Tutorials
More Creo Tutorials means more knowledge for you
More knowledge you have more productive you are
More productive so you earn more money
More money you earn more donation to me
More Thank you …
Vladimir Palffy - www.4kside.com/
... all of 4kside content with just one link: linktr.ee/4kside
Compilation Channel: Subscribe by / channel
Tags: #creotutorial #creoforbeginners #4kside #vpalffy #palffy #vladimirpalffy #how_to_creo

[@antiquarian1773]

very good work !

[@RyanMullerRussia]

Превосходно сделанный материал!
Доброго здоровья Владимир!

[@4kside]

Thanks Ryan for your positive feedback. Vladimir

[@sergeydukman5832]

Владимир, спасибо за видео - очень полезно и понятно.
Вопрос - почему вы не обращаете внимание на сеть (meshing)? Ведь именно meshing определяет точность результатов

[@4kside]

Hi, thanks for your positive feedback. I have tried to explain details regarding Mesh in this video th-cam.com/video/tbckfGqBAng/w-d-xo.html I hope that is useful. Best regards Vladimir

[@daviddenson599]

Thank you. But if I want to keep my load as variable, would that be possible?

[@4kside]

Hi David, I have only base license. And I do not remember if it is possible to apply variable loads. Maybe some user will answer. Let's wait ;) Vladimir

[@designX404]

How can I get final optimized model with new dimensions?

[@4kside]

Open Analyses and Design Studies window (where you create and run analyses) >Select Display study status icon > in this window you can find when analyse is finished and also you can find calculated results.
Please read last section under: The parameters values are now feasible and check modify your model dimensions based on results.
Good luck with your project.
Vladimir

[@syedazad9939]

Is it possible to show it with an assembly ?

[@4kside]

Hi, Creo simulate is also possible to run on a 3D model and also on an assembly.
I did it try it yet, but I hope that also design study is working on an assembly 👍
Please try and let as know 😉
Bye, Vladimir

[@syedazad9939]

yes did it successfully, due to NDC can't post it here.