Peugeot Boxer Fan Kit Replacement

แชร์
ฝัง
  • เผยแพร่เมื่อ 23 ต.ค. 2024

ความคิดเห็น • 20

  • @biankabooth9891
    @biankabooth9891 2 หลายเดือนก่อน +1

    Fantastic thanks for that as have to do mine, Question? The flat screwdriver what lugs were you pushing in ? They were the the wring loom lug connectors or the housing fan lugs pls? .
    Did you have to gèt underneath your van at all as mine is too low and have a bad back, albeit I was a mechanic and now electrician.

    • @ianwheeler7903
      @ianwheeler7903  2 หลายเดือนก่อน

      I used a flat blade screwdriver to release the fan housing lugs. I may also have used one to release the loom lug connectors.

  • @biankabooth9891
    @biankabooth9891 2 หลายเดือนก่อน +1

    So is the bottom slow fan the AC ? 'Cos I am using my Ac ok as long as I top up with water on the radiator till My new Fan comes, or I just keep replacing fuses to get the slow fan to work on a slight wobble till I turn ign off lol. Need the air con as am in Spain, till my unit comes.

    • @ianwheeler7903
      @ianwheeler7903  2 หลายเดือนก่อน

      The bottom one is for the A/C. Basically my A/C fan motor packed up, which is one of the reasons it was not working. The other reason it was not working was that I had a hole in the A/C condenser which let out all of the refrigerant. I have since changed the condenser.

  • @grahamjohnstone3483
    @grahamjohnstone3483 ปีที่แล้ว +1

    Did you attemp to remove the fan assembly from below? it looks as though it may be possible.

  • @TheRooster15
    @TheRooster15 2 ปีที่แล้ว

    Excellent! Many thanks for your video very useful!

  • @martinkovii4820
    @martinkovii4820 2 ปีที่แล้ว

    Hi, did you sort issue with the fan? I had problem with radiator and it has been replaced because of leak. After a few miles just noticed that left hand fan not working just the rh side bottom one. Temperature reach middle point on dash. Please help. Thanks

  • @bartoszplocha6366
    @bartoszplocha6366 ปีที่แล้ว

    should 2 fans work same time when radiator fluid getting to hot?

  • @TatySoy_269
    @TatySoy_269 2 ปีที่แล้ว

    Thanks for sharing the video. Good work.
    A fan like yours has stopped working for me and I intend to do the same job as you. I have seen that the fans that you have removed, one has 7 blades and the other has 9 and the one that you have put both have 7 blades.
    Have you had any problems for this reason?
    What is the reference of the piece that you have put new?
    Thanks again

  • @kevanblay888
    @kevanblay888 ปีที่แล้ว

    Hi Ian, great video, I'm going to be fitting new fan assembly this weekend.
    Btw when you said the LH fan is the AC is the one on the drivers side?

    • @kevanblay888
      @kevanblay888 ปีที่แล้ว

      @@ianwheeler7903 Thanks Ian.

  • @illgiveitago1239
    @illgiveitago1239 2 ปีที่แล้ว +1

    You need to replace the 40 amp large blade fuse. This is under the passenger headlight.

  • @118adamm
    @118adamm 11 หลายเดือนก่อน

    Hi Ian did you manage to get the fan working?

    • @ianwheeler7903
      @ianwheeler7903  11 หลายเดือนก่อน +1

      Yes, along with the fan failure, I had a hole in the condenser and had lost all of the refrigerant. I have since changed the condenser which I have made a video about and had it re-gassed. All is now working fully.
      Thanks for your interest in the video.

  • @thenoworriesnomad
    @thenoworriesnomad 2 ปีที่แล้ว

    As always mate👍👍

  • @Met4You2
    @Met4You2 2 ปีที่แล้ว

    how much time its take ?

  • @mikeenorris8499
    @mikeenorris8499 ปีที่แล้ว

    Slides out the bottom no need for all that removal

    • @ianwheeler7903
      @ianwheeler7903  ปีที่แล้ว

      Great to know if I need to do it again. When I did it, I could not find any information, so went with what I could see.
      Thanks for your input.

    • @biankabooth9891
      @biankabooth9891 2 หลายเดือนก่อน

      But that would need the van being jacked up, this is better so anyone can Do it without .