Dang brother that target is so far away I think a flight attendant was serving drinks on the way in!! Well done as always it's a true pleasure to watch you both doing what you love!
Sam is amazing as a spotter. Even with the vision through the eye of the camera, I have trouble knowing where the point of impact is accurately. Top job, Sam.
You have plenty of time to get off a follow up before the first hits. That rig is awesome. Just might change my mind on building a 338 LM. The 300WM is less expensive and easier to acquire.
I envy your ability to set plates out so far. I have a 2hr drive in So Calif to a 1k yd place I can shoot but often get there and people have set up camp out on the range so 4-500yds off to the side is all we get. Almost not worth it because we have to have a person constantly watching for off roaders that will actually ride up to our targets to check them out or try and steal them.
Wow, i use a 30-06 at 800yrds but looks like i might need to try further. Great video. Where can i get info on the device you had mounted foward of the scope?
Mark have you ever heard of Vibra-tite thread locker someone suggested it for scope mounting and said it was easier to remove the screws than with loctite ? I have not used it yet . Another awesome video 👍
Thanks Man, and no haven't used that, the Blue Loctite is easy to use, but, just don't use the Red on little stuff you want to be able to remove, lol, Cheers Cheers
Love the video, I have a Ruger Precision Rifle and Im going after 1 mile. Im currently at 1354 yards, my next Challenge is 1500 yards then Im going for 1760. I need to make a bigger target, the one Im shooting at right now is half the size of the one you guys are shooting at lol but in the Army they taught us to aim small, miss small lol
I declare, every time you shoot I can hear what sounds like the bullet moving through the air towards the target. Maybe it's just some background noise.👍👍👍🙏
I believe you're hearing round coming in towards target... picked up on target camera microphone. I've heard same thing on many of Mark's videos. And Sam should teach a course in proper spotting....she's the best.
That explains why you the man! I was thinking as I watched you shooting into tomorrow that there must be some influence on your bullet traveling so far over a long period of time? Should have known you had it factored in! Just looked up Coriolis effect and its interesting how the effect changes influence depending on direction of your shot. Always learning watching you. Thanks for the reply.
Obviously your favored position is prone (my back couldn’t handle it that long), do you ever use a bench? Or is that just one more piece of equipment you don’t need to bring? I’ve also noticed Sam has been going prone the last few vids. What happened to her stool? Lolol
In Western Australia, even though it gets to 45° C in the day it cools down at night, was 18° C at 5.00am in the video, did that last time we where over east too, just not your house?
@@markandsamafterwork na I’m on the Gold Coast and lately it’s been hot as, we’ve also had the wettest summer iv seen in a long time. I work although WA and the Pilbara was a heat iv never experienced before. I grew up in the outback ( Coober Pedy ) and although it was really hot in summer it was a dry heat that didn’t affect you like the humidity does.
WELL MATES .. ? ? ? I GOT KATHRYN WATCHING ... !!!!!!!! CHEERS .... !!!!!!! P.S. 2-25-54 I WILL BE 70 ... !!!!! PRAISE GOD, GOD BLESS YOU MATES .... !!!!!!! ....... DOUBLE G. HERE AND KATHY ... !!!!!!
I’m running a 195gr Eld match in both my 300 win mags. Now that the ammo has become near impossible to get in back to reloading it. How do you feel about h4350 propellant?
Not something we have ever tried in a 300wm, but, we always use powder company charts to work out loads to suit ingredients, but never make online recommendations on loads, Cheers
Hey guys, great shooting and spotting. I have a quick question for you. After watching several of your videos and hearing what I thought you said was 225 MOA of elevation, What top 3 cartridges take the least amount of optic elevation on your 3km shoots? 50bmg, 416? 408? Something else?
Seriously mate? We just had Papalia take a heap of “very powerful rifle” cartridges off us and here we are demonstrating to him that he missed a few. I could post up photos on the internet of me with a heap of dead roos shot legally too but I don’t do that. It isn’t smart to poke the bear unless you know you can beat him in a fight. I know you have a heap of followers and are probably making something out of this financially but you aren’t going to be too popular with other West Aussie shooters if old mate comes after our .300 Win Mags next.
You are playing into the divide and conquer plan they have for us....Simple facts are, it is not about the power or the distance or anything else, it is just a made up reason to take some of the guns, they want all of them. Have not you not seen the paper they tabled during the week, 5 gun limit! and of course if that goes through how long do you recon before a 4 3 2 1 0 gun limit is demanded. WAKE UP!!!
Excellent shooting & spotting Sam... That is definitely not a SAMMI chamber if your pushing a 230gr bullet. Unless you're stuffing deep into the case. I for one, would like to hear about reamer specs / freebore, cartridge oal ect... if you wouldn't mind sharing one in a while 😁 Anyway, i really like your channel. Thanks...
With the prints freely available on the SAAMI site, the cbto of a .300 win mag is 2.7959". A 300 prc is 2.8518". The win mag is only ~.060" shorter to the lands. "Seating deep", no. There's plenty of bullet shank hanging out of either case. Hodgdon data lists both .300's with the same bullets and powders at almost identical charges and performance. Within fractions of a grain of charge and only a few fps between them. Only in a 30-06 length action is a win mag required to seat deep. In a magnum action, it can be loaded long. The new vlds have a lot of nose and relatively short shanks that get bullets up out of powder vs something like the older SMK designs, assuming you have the magazine to handle it.
From someone who knows zilch about precision shooting, I've learned about 0.01% of your skills watching you two experts, thank you for educating this ignorant wannabe 😀 hahaha 😂 ❤
Dang brother that target is so far away I think a flight attendant was serving drinks on the way in!! Well done as always it's a true pleasure to watch you both doing what you love!
Thanks Bob, Cheers Man
I like how you have enough time to load the next round before that one hits the target; the wind is your biggest enemy.
Thanks Ken
Sam is amazing as a spotter. Even with the vision through the eye of the camera, I have trouble knowing where the point of impact is accurately. Top job, Sam.
Agreed, Cheers Dave
I wait for every video you guys put out fantastic job
Awesome, Cheers Ian
Very, very nice! Thanks for bringing us along!
Thanks Steve, Cheers
I'm afraid I would have had to call in an air strike on that one, lol,, fantastic shooting !
Lol, Cheers Paul, thanks
😂😂😂
Absolutely amazing. Kudos to your team work and research.
Thanks Jonathan
You’re the man Mark. Amazing ☝️👍👍
Thanks Lyndon, Cheers
Another great clip Mark.
At that distance, Sam’s an awesome spotter mate!!👍
thanks Lincoln
Wow, the dispersion on that load (along with your shooting) is great. You were peppering them into a really small group there.
Thanks Willo, yes when all stayed tight it was on the money, Cheers
You are both incredible, love ya work, cheers Yogi ✌️🤙
Thanks Brett, Cheers Man
From Huntington Beach California thank you for showing the terrain of your country
Cheers
Utterly bloody amazing! 🏆
Cheers man, thanks
Great video… danced around the target, still great just to see the activity.. you two take care
Cheers Man
It’s not two miles …. But it’s close.
I’m impressed on how quickly you picked up in something being loose 👍👍👍
Thanks Man, glad you liked, Cheers
Very impressive shooting, got a great teammate as well 👍👍
thanks Man, cheers
Awesome job. Will watch completely later
Cheers Man
You have plenty of time to get off a follow up before the first hits. That rig is awesome. Just might change my mind on building a 338 LM. The 300WM is less expensive and easier to acquire.
Thanks Pete, Cheers
That’s what I’m doing mate except with the 300WSM cheers Yogi ✌️🤙
respect. was great. looking forward the next one
Thanks Derek
And I thought misadventures like that just happened to me. Great shooting.
Lol, Cheers Jack
Outstanding job!
Cheers Man
Fabulous shooting as always. As usual, I was able to brew my cappucino during the flight time
Lol, Cheers Man
Awesome! What a weapon.
Thanks Tim
I envy your ability to set plates out so far. I have a 2hr drive in So Calif to a 1k yd place I can shoot but often get there and people have set up camp out on the range so 4-500yds off to the side is all we get. Almost not worth it because we have to have a person constantly watching for off roaders that will actually ride up to our targets to check them out or try and steal them.
Thanks Man, All the best
You both are great but Sam is on the money
Cheers John
Amazing as always
Thanks Man
Brilliant 👍🏻🇦🇺
Cheers
Great content thanks for sharing
Thanks John
Fantástico esse calibre. Eu sou do Brazil e tenho um fuzil 300wm Remington .
Awesome, Cheers
3km…✌️👍‼️
cheers
Excellent!
Cheers Bill
Hell Mark and Sam wouldn't want to get in your bad books. Even in Christchurch, New Zealand I feel I'm in range!
Lol, cheers Man
Bravo.❤
Thanks Jesus
Great Vid 👍👍👍👍🎯🎯🎯🎯
Cheers
Wow, i use a 30-06 at 800yrds but looks like i might need to try further. Great video. Where can i get info on the device you had mounted foward of the scope?
A Charlie Tarac, (elevation adder) fyi all listed below video, Cheers
Mark have you ever heard of Vibra-tite thread locker
someone suggested it for scope mounting
and said it was easier to remove the screws than with loctite ?
I have not used it yet . Another awesome video 👍
Thanks Man, and no haven't used that, the Blue Loctite is easy to use, but, just don't use the Red on little stuff you want to be able to remove, lol, Cheers Cheers
Amazing.
Thanks Glen, cheers
this is so cool
Cheers
CHINGON!!!!
Cheers man, thanks
Mark where and how u get 228. MOA please u have to tell us 🙏 nice video congrats of two of you
As said in video, Charlie Tarac is set to 200
Love the video, I have a Ruger Precision Rifle and Im going after 1 mile. Im currently at 1354 yards, my next Challenge is 1500 yards then Im going for 1760. I need to make a bigger target, the one Im shooting at right now is half the size of the one you guys are shooting at lol but in the Army they taught us to aim small, miss small lol
Awesome, great to hear, Cheers
Amazing
Cheers
wow and more wow!!
Thanks Sam
Sir,how you care your eyes make sharp ?? Can you explain..my eyes blurred 😵💫🥺
You might need glasses, Cheers
🔥🔥🔥
Cheers
🔥🔥🔥🔥🔥🔥
Cheers
I declare, every time you shoot I can hear what sounds like the bullet moving through the air towards the target. Maybe it's just some background noise.👍👍👍🙏
Sounds of 3000 shot explained th-cam.com/video/_9gxLenODhg/w-d-xo.html
@@markandsamafterworkAhhhh thank you, so I was hearing the bullet path. My hearing ain't so bad after all...😄😄
I believe you're hearing round coming in towards target... picked up on target camera microphone. I've heard same thing on many of Mark's videos. And Sam should teach a course in proper spotting....she's the best.
Great 👍
Cheers Man, thanks
Nicely done. Do you shoot East and West so that rotation of Earth doesn’t factor into windage?
Wind is the issue Brian, coriolis is a small constant, we have videos if interested, Cheers
That explains why you the man! I was thinking as I watched you shooting into tomorrow that there must be some influence on your bullet traveling so far over a long period of time? Should have known you had it factored in! Just looked up Coriolis effect and its interesting how the effect changes influence depending on direction of your shot. Always learning watching you. Thanks for the reply.
Obviously your favored position is prone (my back couldn’t handle it that long), do you ever use a bench? Or is that just one more piece of equipment you don’t need to bring? I’ve also noticed Sam has been going prone the last few vids. What happened to her stool? Lolol
We shoot ELR as real and as accurate as we can, so in the dirt, prone, and when windy it is a lot more stable to spot prone, Cheers
What is the device that you installed on the front of your rifle. In front of the scope? What is that and what does it do?
Charlie Tarac, an elevation adder
Superb shooting do you ever do any hunting best regards from the uk
Thanks Chris and just pest control, Cheers
Hello Sir. What is the gong made of?
Admirer of yours, Leo
Targets th-cam.com/video/1_hubTKAdw4/w-d-xo.html
What do you think of howa 1500s? Thinking about putting one in an MDT chassis.
I have a Howa 1500 precision 26 inch barrel in an MDT Oryx chassis. A great rifle and very accurate.
We have a few like that and like them, Cheers
How on earth are you wearing a jumper, it’s disgustingly hot over here on the east coast
In Western Australia, even though it gets to 45° C in the day it cools down at night, was 18° C at 5.00am in the video, did that last time we where over east too, just not your house?
@@markandsamafterwork na I’m on the Gold Coast and lately it’s been hot as, we’ve also had the wettest summer iv seen in a long time. I work although WA and the Pilbara was a heat iv never experienced before. I grew up in the outback ( Coober Pedy ) and although it was really hot in summer it was a dry heat that didn’t affect you like the humidity does.
Mark. Does it seem the 300 win mag is still more efficient than the 300 prc using the 200-220 bullets?
Too similar to call in that weight, Cheers
Hard!
Cheers
WELL MATES .. ? ? ? I GOT KATHRYN WATCHING ... !!!!!!!! CHEERS .... !!!!!!! P.S. 2-25-54 I WILL BE 70 ... !!!!! PRAISE GOD, GOD BLESS YOU MATES .... !!!!!!! ....... DOUBLE G. HERE AND KATHY ... !!!!!!
Happy Birthday Gary. All the best to you and Kathy. Cheers
Is the arca rail machined into the bipod mount?
Yes, on the ACC chassis it is machined like that, Cheers
I’m running a 195gr Eld match in both my 300 win mags. Now that the ammo has become near impossible to get in back to reloading it. How do you feel about h4350 propellant?
Not something we have ever tried in a 300wm, but, we always use powder company charts to work out loads to suit ingredients, but never make online recommendations on loads, Cheers
👍😊🎯
👍👍
- Why do elite snipers close one eye?
- Because if you close both eyes, you can’t see shit...
Lol, Cheers
@@markandsamafterwork, Elite Sniper, and you do not have to be ill...
Hey guys, great shooting and spotting. I have a quick question for you. After watching several of your videos and hearing what I thought you said was 225 MOA of elevation, What top 3 cartridges take the least amount of optic elevation on your 3km shoots? 50bmg, 416? 408? Something else?
Get yourself a ballistic app man, then start to play, you can figure all that and more, Cheers
At what distance is the muzzle blast inaudible I wonder
sounds of rifles at distance th-cam.com/video/Hq-m3bYrs7Y/w-d-xo.html
@@markandsamafterwork thanx Mark
who makes the mount for the tacom???
We do, here's a link to item in our store 4aw-store.myshopify.com/collections/nightforce-wedge-adapter/products/forward-optic-mount
👍
👍👍
Why do your math in moa? Your scope
Looks to be in mil’s? Great shooting 👌
Nope, moa lol, Cheers
Seriously mate? We just had Papalia take a heap of “very powerful rifle” cartridges off us and here we are demonstrating to him that he missed a few. I could post up photos on the internet of me with a heap of dead roos shot legally too but I don’t do that. It isn’t smart to poke the bear unless you know you can beat him in a fight.
I know you have a heap of followers and are probably making something out of this financially but you aren’t going to be too popular with other West Aussie shooters if old mate comes after our .300 Win Mags next.
You are playing into the divide and conquer plan they have for us....Simple facts are, it is not about the power or the distance or anything else, it is just a made up reason to take some of the guns, they want all of them. Have not you not seen the paper they tabled during the week, 5 gun limit! and of course if that goes through how long do you recon before a 4 3 2 1 0 gun limit is demanded. WAKE UP!!!
Excellent shooting & spotting Sam...
That is definitely not a SAMMI chamber if your pushing a 230gr bullet. Unless you're stuffing deep into the case. I for one, would like to hear about reamer specs / freebore, cartridge oal ect... if you wouldn't mind sharing one in a while 😁
Anyway, i really like your channel. Thanks...
Chamber is the same as what the factory Rem 700 long range rifle this action had originally, load details listed below, Cheers
With the prints freely available on the SAAMI site, the cbto of a .300 win mag is 2.7959". A 300 prc is 2.8518". The win mag is only ~.060" shorter to the lands. "Seating deep", no. There's plenty of bullet shank hanging out of either case. Hodgdon data lists both .300's with the same bullets and powders at almost identical charges and performance. Within fractions of a grain of charge and only a few fps between them.
Only in a 30-06 length action is a win mag required to seat deep. In a magnum action, it can be loaded long. The new vlds have a lot of nose and relatively short shanks that get bullets up out of powder vs something like the older SMK designs, assuming you have the magazine to handle it.
супер ! приятно смотреть из россии ))))
Thanks Man, Cheers
🇯🇵で、こんな、長射程の射場ないよ。
羨ましいです
Thanks Man
From someone who knows zilch about precision shooting, I've learned about 0.01% of your skills watching you two experts, thank you for educating this ignorant wannabe 😀 hahaha 😂 ❤
thanks Don, Cheers
Po europejsku strzelacie, bo widzę jednostki w km :)
Cheers