RLAARLO OMNI TERMINATOR GOES BILLET
ฝัง
- เผยแพร่เมื่อ 7 ก.พ. 2025
- video 4. This video I get all my ordered upgrade parts installed.
Took 15 days exactly to be delivered. Gota be patient its worth it..
This thing is Dope.. all parts ordered directly from their site.
Its built tough..
Becareful on torque some screws are tight and you risk stripping them.
Test and tuning in the works. Next vid will be a run vid.
Any questions, just ask..
Thanks for watching
Peace & Blessings✌🏾🙏🏾
Perfect timing, I can watch you upgrade and figure out in future what to get for my Omni…. It being delivered soon
Right on! Thanks for watching.
Same here . Ur whip is clean love the paint job. Thx for info I got carbon version. What the heck is SWB switch and SWA? I know you power up into gyro mode holding swa but that about it. Any info Ill take. I used to run the grasshopper and Clod buster. Way back lol
Nice just got mine haven’t even run it stock yet will be tomorrow . Now to start saving for upgrades.
Nice!!
Street runner now. Really cool mr me dos . Thanks for the information . I did order the hubs and caps .
Your welcome.. let me know if your hubs have any slop like mine did if you didnt upgrade the cvds.
I will let you know for sure . When they get here 😂
So can u now put a 1/8 scale truck tire on with those adaptors or do u have to change the dog bones to 17mm
That looks great man!!! I see you…. And the worst part of this truck is waiting for the parts in my opinion lol. Dope ride homie
Facts.. the wait part.. gota be patient or it will upset you for sure.. thanks for watching bro.
More vídeos this car plis! This car is amazing!!!
Will do!
Awesome . Looking forward to this .
Me too.. lmao.. i ordered another one to keep stock for hard bashing and a lil ramp.. lol. Not my style but ima give it a shot. Those vids coming soon. Lol
Great vid love your build some good ideas
Appreciate it!
Dang Mr me dos ! I seen that mug scooting in the parking at night . She was moving ! Looks like there was whole lot more power left . When they ride wheelies like that , it’s all good . When you try the ramp , mine needed a little throttle tap on the slower jumps to keep from lawn darting , and it flies nice imo . You’re going to like it after a little practice ! Let us know . I was jumping in the grass .
lmao. Its much faster with my gear change now, 100% is Ludacris mode . with that being said, I have a change of plans. I bought another one lol.., Im keeping stock, may switch diff cups, but that one I will start my jumping with.. i bought myself a lil ramp to start too.. my billet one is for on and off road open field bashing..
.... I'm lovn my
OT Carbon Version .... I Have A
2200MAH X 2 3S Battery Set Up So It Runs About 24 To 30 Min. Now .... This Truck Is Fast Even Without Using The Speed Pinion Gear ....
... I Subbed Too ...
thanks for the sub.. yeah mine was geared very aggressive and I was having esc issues, I had to dial back the pinion to a 20t mod1 to run with the spool and its still crazy fast.. looking forward to the 1:14 scale lil rocket truck that drop sept 8th from them too
@MrMeDos r u referring to
THE GLADIATOR aka ROG as It says on the box I guess it means rlaarlo omni gladiator
I bet if you put the stock axels back in the front youll get rid of the slop. I had the same problem with mine, so I did what I just recommended to you, and it worked like a charm no slop at all.
Yup your right. I thought about it but i just switched my wheels and i just gota charge it to the game. As long as its all tight and nothing is loose. I just gota deal with it. 💪🏾💪🏾🤣
Damn I'm glad I kept watching the video I didn't see those worm gears for the differentials on the website that's why mine runs like s***
I did the same setup with a 4068 size can and for some reason I think you also got an update the front and the rear differential they're not the same size as that mod 1 spool
You know they have 60T 48p spool also. Their descriptions are a bit confusing...
Yeah I wanted M1 gears.. i have way more pinions to try without having to buy all 48p pinions.
interesting . good morning. this rlaarlo is silver. this is the version 01 ?
Looks 🔥🔥🔥. Let me know if you want to sell the spare parts. Thanks.
Let's take a look at your Terminator's upgraded abilities😍
ohh yeah!
Thanks for sharing . On mine I burned out another 24t pinion . It was on turbo mode . So o figured out how to shut that off and installed a 27t pinion . Feels a lot better . I think it was the turbo function anyways . Sounds a lot better now , feels a lot smoother and is enough . I think the turbo mode is the weaker beep With the SWT button .
Which version you have?
I don't hear any beep on my transmitter, I tried pressing that button and running it and still didn't notice any jump in power 🤷♂️
Edit: I do hear the beep, just never noticed it. It's hard to tell the difference between the tones
@@MrMeDoscarbon fiber version
@@angkorpeckit s real subtle . I m pretty sure it’s the lower sounding one on mine anyways
nice!
Let’s see it speed run on smooth new pavement
Gorgeous Omni man. I am upgrading mine and love those tires. What kind are they? Also, did you have trouble getting the steering post screws out? mine stripped. now I gotta slot them and its going to be a pain. I also had to use a teflon washer that I use on my Traxxas cars. Replaced the metal washer with the teflon which was a tiny thicker and it removed the slop for me.
Thanks man. These tires are from powerhobby.com. They are “belted” heck no they are not. The balloon just as much as the stock. But pretty cool to run onroad.
No issues with hubs on mine. Just the slop from converting it to 17mm hex, that i didnt like.
this rlaarlo silver i have interst to buy !
What is the exact part number and brands of those tires and wheels? They are fire!! Thank you
Here you go bro. Enjoy!!! www.powerhobby.com/products/powerhobby-1-10-2-8-st-super-sonic-belted-tires-2-with-removable-hex-wheels
👍🏾💯🔥
there is a spacer already to delete slop at 16:30. You must missed it somewhere, or just mine be different case of different slot#.
the slop is on the inside of the hub where the treads of the shaft sits. its loose. the space between the hub and the hub carrier is nice and tight, but inside the 17mm hub itself is loose. but a lil tape around the threads fixed it.
Has anyone really been breaking these yet? Aside from the front shock standoff I've not seen many issues. Is this more just because it's there stuff? I've not really driven mine much since the Vigilante came out and was delivered while i was waiting on this to finally ship. It seems to be a pretty tough little rig from my limited experience.
the upgrades especially on the drivetrain is beneficial, many guys complaining about rear diff cups on stock going bad. the upgraded cvds , dog bones, driveshaft , hub carriers are great strengthening upgrades. the 17mm hex conversion helps me with the amount of power I'm putting in it and my tire selection is larger. Upper A- arms adds adjustability to for camber as well. Top plate and bell crank is for bling.. I will be upgrading the diff housing to billet next.. building an on-road open field running tank.
Have you checked if the front CVDs are a direct fit for the rear?
Naw. They prolly do. I dont remember seeing two sets online
Mr Me Dos, where is the run video with the aluminum on? did it fly like the wind?
Yeah it moves.. took me a minute to dial it in, find the right gearing and tires.. it’s fast.. i only run it on 3s now.. soon as the weather change i can get more running vids in other locations. This one needs room to run. Its just to hot out at the moment. Then, other rc’s come out and this one keep getting pushed back. But i will bring it back.. promise..
@@MrMeDos I Upgrade mine with everything but the new Differentials. The plastic ones are fine and I have the Carbon edition so the gears were already the helical style. I finally got the top plate and steering assembly on last night I stripped the screws in the top of the top plate and had a hell of a time finding ones that would fit in my screws but finally got hold of them.
@@MrMeDos What city you in?
Do you think that the stress on those adapters for 17mm are going to hold up being they are not tight on the threads? seems like a strange design. Why not just use center retainers like most other adapters?
Why did you change to a spool over a center diff?
This my street basher, i dont jump with this one. Dont need a center diff for onroad.
Great vid, How heavy do you think it got from before with the add ons
Good question.. i didnt even weigh it 🤦🏾… but i have a stock version and I will check it. Im sure its not to much heavier.
Is your factory drive shaft straight?? Want to mail it out? Maybe? Also did your stock tires wobble? Don’t understand why mine do and drive shaft wobbles when moving car by hand back and forward. Trying to figure out before maybe sending back… or maybe it’s the cups off centered for center diff and front diff? Mine is rtr so how hard to get it apart?!
@9:10 yours wobbles too but from cup and center spool so maybe on my it’s a cup and center or front diff
its not to difficult, just need some patience to deal with the screws. lol
Awesome how long did it take to get your parts? I need a few parts for my Desert Buggy but might as well get some parts for my Carbon Terminator. Now ya gotta get green chassis lights. 🙌
It took 15 days exactly..
Save extras I’ll buy em from ya
👍🏿
9:12 Do you usually prefer spool than center diff ? Or that was just for having a different gearing option?
Thanks mate (and sorry if my English isn’t good sometimes, not my mother language)
i prefer spool to be honest, center diff is great for off roading, but a lot of my builds are on road bashers, i let the front and rear diffs do the work. but my my losi five-t's and five-b have center diff lockers, and a few of my other 5th scales as well or the center diff has 20mil fluid. but for the terminator i wanted Mod 1 gearing and a spool, not as small as a 33T prolly a 40 or 42. Its crazy fast, too fast.
Did you have M1 pinion before the spool or you had 48p with stock spur?
Yeah i had 30T 48p pinion with stock spur. Could prolly went to 35t to 40t..
And if you lock the center diff with some silicone earplugs, your front wheels will stop ballooning altogether 100% I promise
Im running a spool and GPM tires now. Its wicked quick.
I'm new to the hobby, and I picked one of these up. How did you lower the ride on yous?
nice.. its a droop screw on the lower a-arm close to the differential, you can turn the screw and it will lower the truck to the ride height you want.
@@MrMeDos Thanks!
Have you run it since this upgrade? How did it perform?
yes a bunch of times, i no longer run these tires, I run GRP street tires. and only on 3s. 4s load is to high for my gearing and my esc cuts off. So I do not want to change my gearing so I just went down to 3s and it screams.
On the grp tires whats the best ones to get for example xm7 or xm1 xm4 etc
What tires are you using
Today, im running GRP.. these power hobby street tires balloon way more than I like for high speed.. they cool but not for 3s 50+mph rigs.
Cvd’s still look to skinny they need to make them a bit bulkier
Where can I get these wheels?
Powerhobby.com
What tyres are those bro?
powerhobby supersonic . from powerhobby.com supposed to be belted but they are not
What kind of wheels t those
Power hobby belted scorpion wheels.
what wheels r thos
Powerhobby..
I just cant get enough of this haha. I got my second carbon roller edition. Im running a 120a/esc three 35 volt caps, and a 6s lipo its an absolutely screamer
😳 6s.. thats a super rocket. Damn!
@@MrMeDos IT sure is. Cant wait to see what a 50tspur with a 32tpinion does. Also i did get the 33t/m1 spur gear. And with that im going to run eithers a 15 or 17t pinion depending on temps
My 33t spur gear just came and it is in fact worded wrong on website. It is not a 33t/32p it is is 33t/m1 huge difference.
Lmao. I knew it was M1. I think i saw it somewhere on there. Im down to a 21T pinion. My gearing was way to aggressive for my esc and it kept going into protection after 2-3 runs. Temps in the 200.. that was with a 27t pinion and 33t spur with the mamba x esc . I really like the size of that esc it fits perfect. So i geared down and its still stupid fast.. its a 100mph setup easy if i could ever get it to that fast and straight without crashing. Lol.
@@MrMeDos so I've never changed a gear before besides opinions but from what I read this thing on a 6S 33 T spur gear and 16 gear pinion it would have to be an absolute nutcase car LOL
What tire's r those
Powerhobby scorpion tires. Powerhobby.com