SkyRC T1000 Charger Review: Unleash the Power of Smart Charging

[@Deej-85]

As as always Ali your channel is one of the best rc related on YT, I used to watch you back in the day when I learnt to fly my belt Cp V2, I had a good ten years away from the hobby. been back at it for the last year and your still here bringing the details and knowledge, many thanks for the review and tutorial on this charger I run 2 of them together for charging my 12s packs.. They are awsome bits of kit mate 👌

[@alishanmao]

Welcome back! and thank you so much for your continued support

[@craigjones4587]

as always good video and i like the funny ending -just bought the t1000 charger luv it

[@alishanmao]

Good choice!

[@dannycontreras9032]

Can you use the pd hub and charge a battery at the same time with the t1000? Does it have a memory to keep the settings of different batteries? Thanks.

[@MaxPower-zp7wy]

Why is AC 240V only 450 watts and yet DC 30V is 1000 watts. Doesn't make sense. Shouldn't we get higher AC wattages ????

[@alishanmao]

i thought that too but its all about electric and electronics engineering rules maybe

[@jalee6587]

Simple, It's because the internal power ac dc transformer will only support 450watts. Makes sense as 1000 watt ac to DC power inverter would be bigger and heavier than the whole charger itself. With An external ac to DC inverter power supply you can purchase as big as you like. the charger will then support up to 1000 watts

[@tonyjohansson2967]

Thank you for this excellent review 😀👍

[@alishanmao]

You are always welcome

[@aloccimaurizio4191]

Dear Ali, I need some advice. Sometimes it happens that we return from the flying field with some unused LIPOs that are still 100% charged. I have a SKyRC BD 350 battery discharger and a SkyRC T1000 Maestro battery charger. I would like to know how many Amperes to set to discharge for example a LIPO 6S 5800mha in a reasonable time but without damaging the battery. I don't know if there are parameters to respect. For charging I normally set 1C. Thank you. Maurizio.

[@alishanmao]

discharge at 2A to 3A safely. I do this, i have used upto 10A for fast discharge but that makes battery pretty warm and obviously danger of catching fire, reducing life.

[@aloccimaurizio4191]

Perfect, thanks Ali.😅

[@billsrs1982]

Hi hope your well. I’m looking at this charger and also the 200 neo what would you recommend

[@alishanmao]

if you need more power this one, else 200 neo will do the job

[@e.magic.7194]

The power of a charger means less time charging the batterys?

[@pawelcross]

Hi.
Me I ask, can t1000 charge lipo for 4.14v/cel? I check only 4.18-4.22v
The same discharge, I cant set IT up to discharge to 3.95v
Regards 🖐️

[@alishanmao]

yes there are limitations

[@Name-eo9xi]

A Salamu alaikum! Brother tell me why SKYRC PCH-150 Hub is so expensive compared to Skyrc b6 neo? What makes it unique? Or do you have different prices? Something extremely expensive for such a device that cannot work autonomously

[@alishanmao]

I have no idea buddy. :) There are cheaper 65W to 100W Charging devices that you can directly plug into an outlet :D

[@smokefathersbbq]

Do you think I can use a BD250 on it?

[@alishanmao]

The discharger i have shown works. is it BD350. not sure for BD250

[@smokefathersbbq]

@@alishanmaoOk, thank you.

[@MaxPower-zp7wy]

Ali if I'm charging a 9000mah battery then 9amp is 1C charge rate ?

[@alishanmao]

Charge on 5A, i charge my 10AH batteries on 5A, does a good job

[@jalee6587]

Yes 9 amp would be a 1c charge rate on a 9000mah battery

[@abdkarim6004]

Alsalam alykom, my friend what is the best device to make balance for electric car battery like tesla

[@alishanmao]

No idea for that

[@lorisvergendo6682]

Si collega all app skyrc?

[@alishanmao]

can't understand

[@Hermann56]

Very good vid 👍

[@alishanmao]

Thanks for the visit

[@izzaniielachannel]

Waalaikumsalam sir..

[@alishanmao]

Thanks buddy 👍😀