the router needs to be connected to the first cable device in order to use the repeater function or after the configuration does it perform this function like any other traditional repeater?
Hi, after configuration, the repeater would be connected to the primary router in wireless mode. It will work as normal router and can have different security password from primary router. Only thing is that the devices connected to this router will be shown as connected to primary router.
I have issue with all tv cast platforms (TH-cam, spotify, alexa dot, oculus quest 2). Sometime disconnect after 10sec and sometime can't connect at all. Same with 2.4 and 5.0. upnp already enabled. this case can be solved with this pattern ? Model:tenda v1200 Thanks
Thanks. But when i select host and write wifi password i had a problem your security key has wrong character like!%. Please select another. How can fix this! My security key include that character too
o roteador precisa estar conectado ao primeiro dispositivo por cabo pra poder usar a função repetidor ou após a configuração ele realiza esse função como qualquer outro repetidor tradicional?
Does this device needs to be plug in main router to work? Or I can just bring this device anywhere as long as this tenda ac6 router can connect to my main router?
Hello, in this tutorial the tenda device used can be connected to main router wirelessly. Hence, it is not required to connect it main router through wire. Yes, you can keep it anywhere within the range of primary router.
Hello, it depends on your type of Internet Service Provider (DSL or ADSL) and the brand of Router. There are several other videos on TH-cam for the same. Also, the motive of this video is to cover only the configuration of secondary router.
@@abdulrauf2796 Hello, i am assuming that your base router is tp link and secondary is tenda. Is the primary router not shown while scanning option in the secondary router? Try keeping both the routers close while configuring. If that also doesn't work then you can see an alternative way to set this up here - th-cam.com/video/KekndUFZ6xc/w-d-xo.html
Hello, can't say what is going wrong here. You need to check the steps carefully again (especially the IP address part). You can also use the other video i mentioned in the previous comment.
hello i followed the tutorial to the point but as soon as i disable the DHCP on the repeater router it will marge as you said but then i cant connect coz it says failed to obtain IP
Hello, it should merge. Please check if there is a step that you might have missed. If not, then you can use this second method to make wireless repeater. th-cam.com/video/KekndUFZ6xc/w-d-xo.html
Hello, it means either the router does not support wireless bridging or there is some other way to do it. You might need to look for any other video related to your router.
I do all the steps, but when I connect with the repeater it says "No Internet Connection" for some reason! Can I get some help.. is there anything to do about the main router?
Hello, can't think of any reason why it would show the "No Internet Connection" message. Please do retry the steps again, there may have been some miss. Also, you can try the other video th-cam.com/video/KekndUFZ6xc/w-d-xo.html&t= with the similar router but different wireless mode.
Once I disable DHCP, I can't access the internet. None of my devices that were connected to the main router can now also not connect to the internet. Many people have this problem but nobody ever seem to reply with the solution.
Hello, need to check why most of the people are getting the same issue. Anyways, you can try the other video th-cam.com/video/KekndUFZ6xc/w-d-xo.html. This video is similar to the one you have watched and the configuration is rather simple here.
Hi, If the router has similar functions like above and not showing base router that could only mean that base router signals are weak. Try keeping both routers nearby. If the problem persists, then try checking channel settings of both the routers. They both must be operating on the same channel.
Hello, make sure that you have followed the steps properly. Check whether you have put proper ip address for this router which is not used by any other device. Also, check your main router's DHCP server Range. In my case it was 192.168.0.1 while yours can be 192.168.1.1 or something else.
@@m.y.l.e.6328 I have the same problem, as soon as I disable the DHCP internet access is lost and any of the devices can access to even the main network
Hello, please check if the steps were followed correctly and the router model is similar to this one. If problem persists, you can try the second method for the same router th-cam.com/video/KekndUFZ6xc/w-d-xo.html
@@m.y.l.e.6328 it was working for the first time when I used universal repeater option. But 192.168.0.1 is not accessible. So I reset the router. Now it's not working
@@pvinayak96 Hello, this might mean that both the routers have DHCP server turned on have same ip address gateway 192.168.0.1 which leads to ip address conflict. This may be a reason i could think of now.
There is no wireless extender option in my wireless setup panel. Do you know what is the problem.
Sir thank you so much 🙏
Perfect 👌 process to connect 2 router 👏
Awesome bro... thanks a lot
the router needs to be connected to the first cable device in order to use the repeater function or after the configuration does it perform this function like any other traditional repeater?
Hi, after configuration, the repeater would be connected to the primary router in wireless mode. It will work as normal router and can have different security password from primary router. Only thing is that the devices connected to this router will be shown as connected to primary router.
thank you
Works perfectly..Thanks
I have issue with all tv cast platforms (TH-cam, spotify, alexa dot, oculus quest 2). Sometime disconnect after 10sec and sometime can't connect at all. Same with 2.4 and 5.0.
upnp already enabled. this case can be solved with this pattern ?
Model:tenda v1200
Thanks
*in my router this setting is in wireless -> wireless working mode*
I hope I helped
I think you made the difference
Good 👍
hi ,please how set tenda w316r wds bridge
Lol i just did the first part to change the lan ip and then i fixed the DoubleNat type error i have xD
Thanks u
which step i have same problem? can you help me
sir i had connected tenda as repeater with tp link thru wire.
tp link primary hai.
i have different ip address so no need to change it right??
can i change the frequency the repeater mode broadcasts in to 5ghz while having the main router in 2.4 ghz and in theory get reed of the speed penalty
Thanks. But when i select host and write wifi password i had a problem your security key has wrong character like!%. Please select another.
How can fix this! My security key include that character too
o roteador precisa estar conectado ao primeiro dispositivo por cabo pra poder usar a função repetidor ou após a configuração ele realiza esse função como qualquer outro repetidor tradicional?
Nao o roteador vai conectar ao dispositivo via wireless.
What's your router model
Does this device needs to be plug in main router to work? Or I can just bring this device anywhere as long as this tenda ac6 router can connect to my main router?
Hello, in this tutorial the tenda device used can be connected to main router wirelessly. Hence, it is not required to connect it main router through wire. Yes, you can keep it anywhere within the range of primary router.
@@m.y.l.e.6328 thank u
Hello will tenda AC 8 work as repeater ?
I want to use my netgear router as repeater to extend my tenda router. Plz help
Thank u bro
What model is this? D151 ADSL2 or something else?
This is N150
I have tenda f3, but there is no option "Wireess Extender". What could be the issue?
Could be your router doesnt support wireless extender
Explained the half part.. what about configuring the primary or source router.
Hello, it depends on your type of Internet Service Provider (DSL or ADSL) and the brand of Router. There are several other videos on TH-cam for the same. Also, the motive of this video is to cover only the configuration of secondary router.
@@m.y.l.e.6328 Yes, I am having source router of TP-Link and Base router is Tenda and tried as per the given steps in Videos, but was unsuccessful
@@abdulrauf2796 Hello, i am assuming that your base router is tp link and secondary is tenda. Is the primary router not shown while scanning option in the secondary router? Try keeping both the routers close while configuring. If that also doesn't work then you can see an alternative way to set this up here - th-cam.com/video/KekndUFZ6xc/w-d-xo.html
@@m.y.l.e.6328 Yes after scanning it is showing the tp link router and is also connected but the internet is not working.
Hello, can't say what is going wrong here. You need to check the steps carefully again (especially the IP address part). You can also use the other video i mentioned in the previous comment.
Didnt work for me, after doing as u said, wifi is not connecting showing Failed to obtain IP, although they merged alright
What's it model name????please tell me
In my main router is 75 mbps download speed, in the other wds router is gonna be the same?
Hello, the speed of both routers may not be the same. Lower speed router will work at lower speed.
What if my router doesnt have wifi extender option under wireless tab?
There should be a similar option. If nothing is there then it seems your router doesn't support wireless repeater function
kesi bee router ka net repeat kesa kara iss router ma
I changed the IP address and all but there's no wireless extender option after that for me
I don't have a wireless extender option...
which roter is u using
Hello, this tutorial uses N150 router.
hello i followed the tutorial to the point but as soon as i disable the DHCP on the repeater router it will marge as you said but then i cant connect coz it says failed to obtain IP
Hello, it should merge. Please check if there is a step that you might have missed. If not, then you can use this second method to make wireless repeater. th-cam.com/video/KekndUFZ6xc/w-d-xo.html
why i dont have wireless extender option
In my wireless settings there is not option called Wireless Extender, any help ?
Hello, it means either the router does not support wireless bridging or there is some other way to do it. You might need to look for any other video related to your router.
I do all the steps, but when I connect with the repeater it says "No Internet Connection" for some reason! Can I get some help.. is there anything to do about the main router?
Hello, can't think of any reason why it would show the "No Internet Connection" message. Please do retry the steps again, there may have been some miss. Also, you can try the other video th-cam.com/video/KekndUFZ6xc/w-d-xo.html&t= with the similar router but different wireless mode.
Once I disable DHCP, I can't access the internet. None of my devices that were connected to the main router can now also not connect to the internet. Many people have this problem but nobody ever seem to reply with the solution.
Hello, need to check why most of the people are getting the same issue. Anyways, you can try the other video th-cam.com/video/KekndUFZ6xc/w-d-xo.html.
This video is similar to the one you have watched and the configuration is rather simple here.
The ports become useless on repeater or AP mode
When I connect through repeater it shows could not obtain ip address
Same as me how?
Is it available on AC6?
Hello, I am not sure about that. But it is an advanced router hence it should have the feature.
Yes, it is: www.manualslib.com/manual/1218386/Tenda-Ac6.html?page=29#manual
Hi, for me this part of a network has no internet connection. Any ideas?
same
entering 192.168.0.1 says , this sight cannot be reached
in wireless extender>open scan there is not my modem,what can i do?
It means the secondary cannot find a wifi signal nearby. Keep the secondary nearer to the primary.
@@m.y.l.e.6328 but i dont know other routers password
@@m.y.l.e.6328 can you help me with team weaver?
Sorry i can't
You must know other router password which you want to make as primary. Isn't that your own router?
WDS Bridge (Tenda 03v2.0 to TPLink Router) Connected but no Internet. Plz Help me
What does it say? If it is connected without any ip conflict then the internet must work in secondary.
@@m.y.l.e.6328 do we need to enable wds in tplink router i.e base router ? ( I am also facing the same issue)
My base router signals are not showing in wireless repeater settings can you help me
Hi, If the router has similar functions like above and not showing base router that could only mean that base router signals are weak. Try keeping both routers nearby. If the problem persists, then try checking channel settings of both the routers. They both must be operating on the same channel.
M.Y.L.E. ok ill try nd then let you know
M.Y.L.E. thank you so much bro.
My man yo the real MVP
after I successfully bridge the router, the lan connection on tenda is not functioning anymore
Hello, it should. Please let us know if you were able to use the routers successfully.
ভাই এই রাউটার মডেল নাম কি
wirless reperater network internet ke setting bata da
WDS Bridge not found on Tenda F9
Hello, Check out the other video on Tenda. Maybe this will help.
th-cam.com/video/KekndUFZ6xc/w-d-xo.html
At last when i turn dhcp server desable it don't connect to router and countinuosly showing obtaing ip address what to do????
Hello, make sure that you have followed the steps properly. Check whether you have put proper ip address for this router which is not used by any other device. Also, check your main router's DHCP server Range. In my case it was 192.168.0.1 while yours can be 192.168.1.1 or something else.
@@m.y.l.e.6328 I have the same problem, as soon as I disable the DHCP internet access is lost and any of the devices can access to even the main network
I need ur Help
Can I use TENDA D303 ?
oh bhi dekha to kia kia likha hay sub kuch to blur kr ka rkha hay
Tenda , Tinda samj may aae ga
When i pick what router i want he says that ip adress already exist
Literally got no LAN settings option.
After this, my repeater itself is gone from the network.
Hello, please check if the steps were followed correctly and the router model is similar to this one. If problem persists, you can try the second method for the same router th-cam.com/video/KekndUFZ6xc/w-d-xo.html
@@m.y.l.e.6328 it was working for the first time when I used universal repeater option. But 192.168.0.1 is not accessible. So I reset the router. Now it's not working
@@pvinayak96 Hello, this might mean that both the routers have DHCP server turned on have same ip address gateway 192.168.0.1 which leads to ip address conflict. This may be a reason i could think of now.
@@m.y.l.e.6328 nope. main router is having 192.168.1.1 and repeater is having 192.168.0.1
@@pvinayak96 Then you may try configuring everything once again. Maybe you missed something earlier !!
Kuch nahi hota
This is N3 router. Try again if you similar router.
M.Y.L.E. can u give me mobile no.