How to: modify common rail fuel injector for hose-end applications
ฝัง
- เผยแพร่เมื่อ 15 ก.พ. 2022
- Hose end fuel injectors are OLD and many times are no a serviceable injector due to many factors, mainly rust. Newer o-ring style injectors can be used and user can benefit greatly by utilizing newer fuel injectors in their hose end system. This video shows you how to do this at home yourself.
We sell conversion kits which include a cleaned and flow tested injector. Ready for you to spend a few minutes converting them yourself.
injector-rehab.com/product/di... - ยานยนต์และพาหนะ
This is gold, thank you so much!!
This worked perfectly, never thought of cutting the plastic before. thank you for the wisdom!
Thanks for posting this.
If you want to modernize an engine with an inlet manifold suitable for the old styre hose injector, will the newer EV1 / EV6 o-ring injector seal towards the manifold? New fuel rail will of course be required.
Depends what the manifold was designed to seal with. Was it designed to seal with an o-ring or is it designed to seal with a grommet?
Is it possible to do it the other way around? I mean connecting hose type injector in rail-end applications?
Why on earth would you want to do that? But if you did, I mean we fit them with several o-rings to allow them to seal on the flow bench. I guess you could do that in a real world application. But not sure why you would want to use the oldest technology type of electronic fuel injector available when there is something better.
If you were going to enter a shooting contest, would you bring your musket? You could....
What size hose are you using over the injectors?
@@darnellbaird206 5/16