After watching your video I got inspired and found a wooden plank instead of the metal plate. It did the trick, opened on the second strike with the hammer! Perfect, thank you
THANK YOU!!! I looked up a few videos on how to remove the side panels and this was fastest and least destructive. The other videos showed other ways that could possibly break the panels. I used a hammer and a wooden flat spatula from my kitchen!
Hi. Thanks for the video it really helped. I decided to removed the brewer unit and give it a clean. I didnt take the brewer unit apart just a clean. But when I put it back it seems like gear keeps turning and does not stop. Any ideas?
On some models the side panels don't slide out like your method? I bought mine in 2013 and it doesn't slide out using your method; it doesn't even move a bit
Thank you for your videos! Sooo, my Jura ENA 8 is "spitting" whenever I make coffee or hot water. It sputters and I have opened up the side and cleaned out the excess coffee grounds plus used the Jura cleaning capsules to try and make this go away. Awy help on how to fix this problem is greatly appreciated!!! It's driving me crazy!
After watching your video I got inspired and found a wooden plank instead of the metal plate. It did the trick, opened on the second strike with the hammer! Perfect, thank you
THANK YOU!!! I looked up a few videos on how to remove the side panels and this was fastest and least destructive. The other videos showed other ways that could possibly break the panels. I used a hammer and a wooden flat spatula from my kitchen!
Very good method with the hammer and metal plate. Thanks for uploading!
Yes, You are welcome 🤷👍🏻
Did you use the oval tool to remove the screw under the logo?
Read comments previous ;) Yes 😏
So you break the locks?
Hi. Thanks for the video it really helped.
I decided to removed the brewer unit and give it a clean. I didnt take the brewer unit apart just a clean. But when I put it back it seems like gear keeps turning and does not stop. Any ideas?
Maybe Encoder!? Which counting gear “steps”
How about bean grinder removal/repair
Need make this Video! But until grinder You can use this and then check “How” 👌🏼 2-3 screws etc..
On some models the side panels don't slide out like your method? I bought mine in 2013 and it doesn't slide out using your method; it doesn't even move a bit
I think You have some other Ena 1,3,5,9 etc..
This method is for Ena9 🤷
Lool good hack 😂❤
Thank you for your videos! Sooo, my Jura ENA 8 is "spitting" whenever I make coffee or hot water. It sputters and I have opened up the side and cleaned out the excess coffee grounds plus used the Jura cleaning capsules to try and make this go away. Awy help on how to fix this problem is greatly appreciated!!! It's driving me crazy!