Dear ayush.. I am struggling in one pueumatic based pressing system...we have used two load cells in one double guided cylinder to check the two different part pressing load...but due to some miss alignment one load cell not taking the load some time... please suggest how to rectify this issue
Hi sir, It would be better, if you could Email some pictures or video. it might be possible the part which to be press, having different height.. in that case spring loaded mechanism can work.. but cant say anything without seeing actual picture. please email.
I have a project that includes the same concept but hte ball screw exist and I must choose a coupling and a servomotor . it is the same linear actuator but the mass is about 1,5 kg
Hi Gangwar, yes, we can use chuck nut instead of circlip, but this will not add performance improvement in general circumstances. moreover, making external thread on ball screw of size like M25 cost much then the simple circlip cut. no worry about circlip life, Use correct size of circlip. you will get enough life.
Excellent knowledge sir❤
Good way to make others understand hard topics easily😊
Thanks a lot 😊
Great! job. Fantastic! SolidWorks design tutorial and design! Thanks for posting! Len......
My pleasure!
Saludos desde México. 🤠Estaba esperando tu video. Thanks for this useful video serie. 🫡🥹
I don't fully understand what you are saying. but you are welcome 😊
It’s very useful video for selection
Nice …….
So nice of you
Nice Explanation ❤
Glad you liked it!
easy to understand thank you sir
I'm glad.. Yes this is my biggest responsibility to make content, easy to understand.
Sir please make videos on timing pulley and timing belt selections and design.
Sure Nandi, I'll bring the video very soon, in between bearing series
Dear ayush..
I am struggling in one pueumatic based pressing system...we have used two load cells in one double guided cylinder to check the two different part pressing load...but due to some miss alignment one load cell not taking the load some time... please suggest how to rectify this issue
Hi sir, It would be better, if you could Email some pictures or video. it might be possible the part which to be press, having different height.. in that case spring loaded mechanism can work.. but cant say anything without seeing actual picture. please email.
I have a project that includes the same concept but hte ball screw exist and I must choose a coupling and a servomotor . it is the same linear actuator but the mass is about 1,5 kg
👏👏
Thank you 😊
Hello sir.
I request a video on O-Rings for assembly size, groove, width, ID OD. Etc
Great suggestion!
Hello, I am designing a dispenser machine with this ball screw devices.... Can you help me decide which is the proper system and motor for my needs?
Yes. You can email me with details
Do you recommend a book that explains all this in detail
There are manufacturer catalogues. Like Hiwin, THK, Misumi. I have not found any particular book for this topic,
@@mastermechanicaldesign this is then an excellent opportunity for you to write an ebook on this topic. I'll buy it immediately.
Sir can we use chuck nut in place of circlip here at extreme end side
Hi Gangwar, yes, we can use chuck nut instead of circlip, but this will not add performance improvement in general circumstances.
moreover, making external thread on ball screw of size like M25 cost much then the simple circlip cut.
no worry about circlip life, Use correct size of circlip. you will get enough life.
Thanks 🙏 sir
Sir m waiting for gearmotor selection series
Okay. Very soon
One question. why did you selected the locknut of size M25*1,5? Is there any reason behind this?
This is a standard lock nut. M25X1.5 as per our shaft size in this project
Backlash will be the free movement between coupling...this will create a lack in motion transfer by the motor shaft to ball screw shaft..🙄
100 percent correct 👍